Daily Papers

Sparse Autoencoders (SAEs) extract interpretable features from Large Language Models, but standard variants enforce non-negativity, forcing separate latents for diametrically opposed concepts (e.g., "pressure too high" vs. "pressure too low") and wasting dictionary capacity when features are anticorrelated. We propose the Sign-Aware Gated SAE (SA-GSAE): two-sided gated sparsity with signed magnitude and auxiliary supervision. A polarity-sensitive gate selects support on either sign, a signed-magnitude path avoids L1 shrinkage, and an auxiliary reconstruction prevents gate collapse. Bipolar sharing - one latent encoding both signs along a shared direction - is realised via a new Bi-Jump-ReLU activation; parameter accounting shows sign-awareness stays parameter-efficient even when anticorrelated pairs are rare. On real LLM activations across three mid-depth hookpoints on Pythia-1B and SmolLM3-3B (6 cells, 3 seeds), a half-width SA-GSAE at width H strictly Pareto-dominates a full-width Gated SAE at 2H over the entire swept L0 overlap on 3 of 6 cells (both MLP-output hookpoints and resid-mid/Pythia-1B); on the remaining 3 it matches R^2 within 0.025 (max gap -0.008) while cutting dead fraction by 0.35-0.62 absolute. Sweep-geomean dead-fraction reductions are ~100x-500x on MLP-output cells and Pythia-1B resid, ~2x-4x on attention cells and SmolLM3-3B resid. Ablations show the two-sided gate and auxiliary loss are load-bearing (no auxiliary collapses LR to 0.27, 98% dead); tying r_i^+ = r_i^- is indistinguishable (|Delta R^2| = 0.0015), and we recommend this symmetric variant as default. MLP-output gains come from most latents carrying both polarities; on attention, bipolar structure concentrates in a small set of top latents. Full-width SA-GSAE exhibits a reproducible reconstruction collapse at SmolLM3-3B resid that the half-width entirely avoids.

This paper introduces the Opus Workflow Evaluation Framework, a probabilistic-normative formulation for quantifying Workflow quality and efficiency. It integrates notions of correctness, reliability, and cost into a coherent mathematical model that enables direct comparison, scoring, and optimization of Workflows. The framework combines the Opus Workflow Reward, a probabilistic function estimating expected performance through success likelihood, resource usage, and output gain, with the Opus Workflow Normative Penalties, a set of measurable functions capturing structural and informational quality across Cohesion, Coupling, Observability, and Information Hygiene. It supports automated Workflow assessment, ranking, and optimization within modern automation systems such as Opus and can be integrated into Reinforcement Learning loops to guide Workflow discovery and refinement. In this paper, we introduce the Opus Workflow Reward model that formalizes Workflow success as a probabilistic expectation over costs and outcomes. We define measurable Opus Workflow Normative Penalties capturing structural, semantic, and signal-related properties of Workflows. Finally, we propose a unified optimization formulation for identifying and ranking optimal Workflows under joint Reward-Penalty trade-offs.

The Kalman filter has been adopted in acoustic echo cancellation due to its robustness to double-talk, fast convergence, and good steady-state performance. The performance of Kalman filter is closely related to the estimation accuracy of the state noise covariance and the observation noise covariance. The estimation error may lead to unacceptable results, especially when the echo path suffers abrupt changes, the tracking performance of the Kalman filter could be degraded significantly. In this paper, we propose the neural Kalman filtering (NKF), which uses neural networks to implicitly model the covariance of the state noise and observation noise and to output the Kalman gain in real-time. Experimental results on both synthetic test sets and real-recorded test sets show that, the proposed NKF has superior convergence and re-convergence performance while ensuring low near-end speech degradation comparing with the state-of-the-art model-based methods. Moreover, the model size of the proposed NKF is merely 5.3 K and the RTF is as low as 0.09, which indicates that it can be deployed in low-resource platforms.

Autonomous robots often need to move their camera before they can act: to inspect an object, reveal an occluded region, or obtain a view that responds to a user's intent. While vision-language navigation translates instructions to base motion and vision-language-action policies map instructions to manipulation actions, language-conditioned camera motion remains comparatively underexplored as a first-class action. We formulate language-conditioned camera motion generation: given a current RGB observation and a free-form natural-language intent, predict a relative target camera pose for the next observation. This task is inherently non-trivial: viewpoint changes are driven by latent perceptual intentions, and a valid motion may operate at different semantic granularity, from entering a room to looking around a corner, inspecting a visible object, or revealing an occluded detail. To model this structure, we mine multi-intention camera-motion supervision from egocentric video, pairing plausible intents and observation-gain descriptions with relative SE(3) target poses. We propose LIME, a vision-language camera-motion generator that combines an auto-regressive observation-gain output with a continuous flow-matching pose head. This design lets the model jointly predict what the next view should reveal while representing multi-hypothesis target views. Across experiments and downstream robotic tasks, we show that LIME can learn to actively choose camera poses from passive human video, turning ordinary egocentric recordings into supervision for intent-aware active perception.

Test-time compute has emerged as a promising strategy to enhance the reasoning abilities of large language models (LLMs). However, this strategy has in turn increased how much users pay cloud-based providers offering LLM-as-a-service, since providers charge users for the amount of test-time compute they use to generate an output. In our work, we show that the market of LLM-as-a-service is socially inefficient: providers have a financial incentive to increase the amount of test-time compute, even if this increase contributes little to the quality of the outputs. To address this inefficiency, we introduce a reverse second-price auction mechanism where providers bid their offered price and (expected) quality for the opportunity to serve a user, and users pay proportionally to the marginal value generated by the winning provider relative to the second-highest bidder. To illustrate and complement our theoretical results, we conduct experiments with multiple instruct models from the Llama and Qwen families, as well as reasoning models distilled from DeepSeek-R1, on math and science benchmark datasets.

Late-lumping feedback design for infinite-dimensional linear systems with unbounded input operators is considered. The proposed scheme is suitable for the approximation of backstepping and flatness-based designs and relies on a decomposition of the feedback into a bounded and an unbounded part. Approximation applies to the bounded part only, while the unbounded part is assumed to allow for an exact realization. Based on spectral results, the convergence of the closed-loop dynamics to the desired dynamics is established. By duality, similar results apply to the approximation of the observer output-injection gains for systems with boundary observation. The proposed design and approximation steps are demonstrated and illustrated based on a hyperbolic infinite-dimensional system.

In-context learning (ICL) is a critical emerging capability of large language models (LLMs), enabling few-shot learning during inference by including a few demonstrations (demos) in the prompt. However, it has been found that ICL's performance can be sensitive to the choices of demos and their order. This paper investigates an unexplored new positional bias of ICL for the first time: we observe that the predictions and accuracy can drift drastically when the positions of demos, the system prompt, and the user message in LLM input are varied. We refer to this bias as DEMOS' POSITION IN PROMPT (DPP) bias. We design a systematic evaluation pipeline to study this type of positional bias across classification, question answering, summarization, and reasoning tasks. We introduce two metrics, ACCURACY-CHANGE and PREDICTION-CHANGE, to quantify net gains and output volatility induced by changes in the demos' position. Extensive experiments on ten LLMs from four open-source model families (QWEN, LLAMA3, MISTRAL, COHERE) verify that the bias significantly affects their accuracy and predictions: placing demos at the start of the prompt yields the most stable and accurate outputs with gains of up to +6 points. In contrast, placing demos at the end of the user message flips over 30\% of predictions without improving correctness on QA tasks. Smaller models are most affected by this sensitivity, though even large models remain marginally affected on complex tasks.

Best-of-N inference scaling (drawing N candidate answers from a language model and returning the one a reward model ranks highest) improves accuracy by an amount that varies across models, but predicting that amount in advance currently requires running the procedure end-to-end. Prior work links cheap statistics of a model's sampled outputs and validation-set correctness (how often samples agree, how diverse they are, how confident the model is, and where correct samples appear) to model behavior, but does not isolate which of these form a stable, compact predictor of best-of-N gain. We fit ridge predictors on features computed from a single labeled validation-set sampling pass, use bootstrap-Lasso as a stability analysis of the candidate feature set, and give a concentration analysis with an explicit linear-approximation residual. Across three base-model families, six post-training methods, and math and reasoning task domains, the stability analysis identifies a strict three-feature core spanning prompt-level agreement spread, label-assisted first-correct-sample position, and completion-length variance; a compact ridge predictor built from this core plus an entropy add-on reaches Spearman ρ= 0.90 with actual best-of-N gain under a reward-model verifier. The intended use is labeled validation-set screening of candidate configurations before paying the full reward-model scoring cost.

Large Language Models (LLMs) currently struggle with tool invocation and chaining, as they often hallucinate or miss essential steps in a sequence. We propose RE-GAINS and EnChAnT, two novel frameworks that empower LLMs to tackle complex user queries by making API calls to external tools based on tool descriptions and argument lists. Tools are chained based on the expected output, without receiving the actual results from each individual call. EnChAnT, an open-source solution, leverages an LLM format enforcer, OpenChat 3.5 (an LLM), and ToolBench's API Retriever. RE-GAINS utilizes OpenAI models and embeddings with a specialized prompt based on the Reasoning via Planning (RAP) framework. Both frameworks are low cost (0.01\$ per query). Our key contribution is enabling LLMs for tool invocation and chaining using modifiable, externally described tools.

Modern language models use a single matrix for input embedding and output projection. This couples two distinct objectives: token representation and discrimination over a vocabulary. This work introduces Leviathan, a Transformer architecture that replaces the input embedding matrix with learned embedding vectorization (LEV), a compact continuous mapping from token indices to embeddings. Leviathan's output head remains untied for a parameter increase of as low as 0.2%. Under controlled comparisons with identical Transformer backbones, Leviathan consistently improves language modeling performance over standard tied-embedding baselines across a 200M-1.2B parameter regime on The Pile with gains that grow during training. At 1.2B scale, Leviathan reduces validation perplexity by 9%, requires 2.1times fewer training tokens to reach the tied baseline's final loss, and improves on all six downstream benchmarks evaluated, including a 30% reduction in LAMBADA perplexity. Frequency-stratified analysis reveals gains to be concentrated in rare tokens, where continuous parameterization reduces perplexity by 81%, falling to near zero for the most frequent.

Large language models (LLMs) are increasingly adept at following instructions containing task descriptions to solve complex problems, such as mathematical reasoning and automatic evaluation (LLM-as-a-Judge). However, as prompts grow more complex, models often struggle to adhere to all instructions. This difficulty is especially common when instructive prompts intertwine reasoning directives -- specifying what the model should solve -- with rigid formatting requirements that dictate how the solution must be presented. The entanglement creates competing goals for the model, suggesting that more explicit separation of these two aspects could lead to improved performance. To this front, we introduce Deco-G, a decoding framework that explicitly decouples format adherence from task solving. Deco-G handles format compliance with a separate tractable probabilistic model (TPM), while prompts LLMs with only task instructions. At each decoding step, Deco-G combines next token probabilities from the LLM with the TPM calculated format compliance likelihood to form the output probability. To make this approach both practical and scalable for modern instruction-tuned LLMs, we introduce three key innovations: instruction-aware distillation, a flexible trie-building algorithm, and HMM state pruning for computational efficiency. We demonstrate the effectiveness of Deco-G across a wide range of tasks with diverse format requirements, including mathematical reasoning, LLM-as-a-judge, and event argument extraction. Overall, our approach yields 1.0% to 6.0% relative gain over regular prompting practice with guaranteed format compliance.

Detecting machine-generated text is essential for transparency and accountability when deploying large language models (LLMs). Among detection approaches, watermarking is a statistically reliable method by design -- it embeds detectable signals into LLM outputs by biasing their token distributions. However, it has been reported that watermarked LLMs often perform worse on downstream tasks. We propose PUPPET, a framework that fine-tunes an LLM via reinforcement learning to generate text that is both more detectable and better performing on downstream tasks. We use two reward functions: a detector that outputs a machine-class likelihood and an evaluator that measures a task-specific metric. Experiments on long-form QA, summarization, and essay writing show that LLMs trained with PUPPET achieve high detectability competitive with watermarking methods while outperforming them on downstream tasks. The analysis shows that this optimization can be performed efficiently with only a few thousand samples in 1--2 GPU hours. Moreover, these gains are consistent across out-of-domain tasks, different LLM families, and model sizes, and are even robust to paraphrasing attacks.

We present our submission to the AXOLOTL-24 shared task. The shared task comprises two subtasks: identifying new senses that words gain with time (when comparing newer and older time periods) and producing the definitions for the identified new senses. We implemented a conceptually simple and computationally inexpensive solution to both subtasks. We trained adapter-based binary classification models to match glosses with usage examples and leveraged the probability output of the models to identify novel senses. The same models were used to match examples of novel sense usages with Wiktionary definitions. Our submission attained third place on the first subtask and the first place on the second subtask.

Linear transformation of the inputs alters the training performance of feed-forward networks that are otherwise equivalent. However, most linear transforms are viewed as a pre-processing operation separate from the actual training. Starting from equivalent networks, it is shown that pre-processing inputs using linear transformation are equivalent to multiplying the negative gradient matrix with an autocorrelation matrix per training iteration. Second order method is proposed to find the autocorrelation matrix that maximizes learning in a given iteration. When the autocorrelation matrix is diagonal, the method optimizes input gains. This optimal input gain (OIG) approach is used to improve two first-order two-stage training algorithms, namely back-propagation (BP) and hidden weight optimization (HWO), which alternately update the input weights and solve linear equations for output weights. Results show that the proposed OIG approach greatly enhances the performance of the first-order algorithms, often allowing them to rival the popular Levenberg-Marquardt approach with far less computation. It is shown that HWO is equivalent to BP with Whitening transformation applied to the inputs. HWO effectively combines Whitening transformation with learning. Thus, OIG improved HWO could be a significant building block to more complex deep learning architectures.

Retrieval-augmented QA pipelines often route retrieved passages through an LLM rewriter before a smaller reader, lifting F1 by tens of points on multi-hop benchmarks; this gain is typically credited to improved evidence quality. We ask whether that lift is causally driven by the gold answer string appearing in the rewritten context rather than by curation per se, using a controlled intervention audit. For each rewritten context we re-run the reader after one of four controlled edits to the compile output: removing the gold answer span, replacing a length-matched random non-answer span (placebo), or injecting the gold into rewrites where it was absent (at the prefix or at a midpoint sentence boundary). Across twelve completed (cell, baseline) intervention runs spanning three reader families (Qwen2.5-7B, Qwen3.5-35B, GLM-4.7), two datasets (HotpotQA, 2WikiMultihopQA), and three compiler arrangements (MA-only, MB-only, MA+verify), removing the gold answer drops reader F1 by 28 to 64 points beyond the length-matched placebo on paired answer-in-compile strata, and prepending the gold into rewrites that lacked it raises F1 by +0.7 to +9.7 points in 10 of 12 (cell, baseline) combinations. A companion five-sentinel audit shows the conventional single-[MASK] probe is itself sentinel-fragile: on 2Wiki it reports a +4.12~F1 ``non-leakage residual'' that flips to -3.33 to -7.81~F1 under four alternative sentinels and fails an equivalence test for three of those four (1/4~pass). We do not propose a new rewriter or mitigation; we release the intervention runner and the sentinel panel so that other rewriter-gain claims can be tested against the same standard.

This paper introduces FUNGI, Features from UNsupervised GradIents, a method to enhance the features of transformer encoders by leveraging self-supervised gradients. Our method is simple: given any pretrained model, we first compute gradients from various self-supervised objectives for each input. These gradients are projected to a lower dimension and then concatenated with the model's output embedding. The resulting features are evaluated on k-nearest neighbor classification over 11 datasets from vision, 5 from natural language processing, and 2 from audio. Across backbones spanning various sizes and pretraining strategies, FUNGI features provide consistent performance improvements over the embeddings. We also show that using FUNGI features can benefit linear classification, clustering and image retrieval, and that they significantly improve the retrieval-based in-context scene understanding abilities of pretrained models, for example improving upon DINO by +17% for semantic segmentation - without any training.

Distributed representations of words encode lexical semantic information, but what type of information is encoded and how? Focusing on the skip-gram with negative-sampling method, we found that the squared norm of static word embedding encodes the information gain conveyed by the word; the information gain is defined by the Kullback-Leibler divergence of the co-occurrence distribution of the word to the unigram distribution. Our findings are explained by the theoretical framework of the exponential family of probability distributions and confirmed through precise experiments that remove spurious correlations arising from word frequency. This theory also extends to contextualized word embeddings in language models or any neural networks with the softmax output layer. We also demonstrate that both the KL divergence and the squared norm of embedding provide a useful metric of the informativeness of a word in tasks such as keyword extraction, proper-noun discrimination, and hypernym discrimination.

Output diversity is crucial for Large Language Models as it underpins pluralism and creativity. In this work, we reveal that controlling the language used during model thinking-the language of thought-provides a novel and structural source of output diversity. Our preliminary study shows that different thinking languages occupy distinct regions in a model's thinking space. Based on this observation, we study two repeated sampling strategies under multilingual thinking-Single-Language Sampling and Mixed-Language Sampling-and conduct diversity evaluation on outputs that are controlled to be in English, regardless of the thinking language used. Across extensive experiments, we demonstrate that switching the thinking language from English to non-English languages consistently increases output diversity, with a clear and consistent positive correlation such that languages farther from English in the thinking space yield larger gains. We further show that aggregating samples across multiple thinking languages yields additional improvements through compositional effects, and that scaling sampling with linguistic heterogeneity expands the model's diversity ceiling. Finally, we show that these findings translate into practical benefits in pluralistic alignment scenarios, leading to broader coverage of cultural knowledge and value orientations in LLM outputs. Our code is publicly available at https://github.com/iNLP-Lab/Multilingual-LoT-Diversity.

Today's large language models (LLMs) can solve challenging question-answering tasks, and prompt engineering techniques, such as chain-of-thought (CoT), have gained attention for enhancing the explanation and correctness of outputs. Nevertheless, models require significant time to generate answers augmented with lengthy reasoning details. To address this issue, this paper analyzes the impact of output lengths on LLM inference pipelines and proposes novel metrics to evaluate them in terms of correct conciseness. It also examines the impact of controlling output length through a refined prompt engineering strategy, Constrained-CoT (CCoT), which encourages the model to limit output length. Experiments on pre-trained LLMs demonstrated the benefit of the proposed metrics and the effectiveness of CCoT across different models. For instance, constraining the reasoning of LLaMA2-70b to 100 words improves the accuracy from 36.01\% (CoT) to 41.07\% (CCoT) on the GSM8K dataset, while reducing the average output length by 28 words.

Recent advances in large language models (LLMs) have highlighted the potential of reinforcement learning with verifiable rewards (RLVR) to enhance reasoning capabilities through extended output sequences. However, traditional RL frameworks face inefficiencies when handling ultra-long outputs due to long-tail sequence distributions and entropy collapse during training. To address these challenges, we propose an Ultra-Long Output Reinforcement Learning (UloRL) approach for advancing large language models' reasoning abilities. Specifically, we divide ultra long output decoding into short segments, enabling efficient training by mitigating delays caused by long-tail samples. Additionally, we introduce dynamic masking of well-Mastered Positive Tokens (MPTs) to prevent entropy collapse. Experimental results demonstrate the effectiveness of our approach. On the Qwen3-30B-A3B model, RL with segment rollout achieved 2.06x increase in training speed, while RL training with 128k-token outputs improves the model's performance on AIME2025 from 70.9\% to 85.1\% and on BeyondAIME from 50.7\% to 61.9\%, even surpassing Qwen3-235B-A22B with remarkable gains. These findings underscore the potential of our methods to advance the reasoning capabilities of LLMs with ultra-long sequence generation. We will release our code and model for further use by the community.

The dense output projection in multi-head attention scales quadratically with model dimension, contributing significantly to parameter count, memory footprint, and inference cost. We propose replacing this projection with a fixed, parameter-free Walsh Hadamard Transform followed by a lightweight learnable affine rescaling, eliminating approximately 25 percent of attention parameters per block while preserving global cross head interaction through an orthogonal, norm-preserving transformation. Across different model sizes, we demonstrate that this structured substitution maintains comparable or slightly superior downstream task performance on standard benchmarks, while achieving up to 7 percent aggregate parameter reduction, 8.9 percent peak memory savings, and 6.6 percent throughput improvement at scale, with efficiency gains growing monotonically with model size, batch size, and sequence length. Interestingly, we observe that structured Hadamard-based models exhibit a steeper validation loss curve relative to training FLOPs compared to their dense counterparts, suggesting more favorable compute utilization during training.

Producing outputs that satisfy both semantic intent and format constraints is essential for deploying large language models in user-facing and system-integrated workflows. In this work, we focus on Markdown formatting, which is ubiquitous in assistants, documentation, and tool-augmented pipelines but still prone to subtle, hard-to-detect errors (e.g., broken lists, malformed tables, inconsistent headings, and invalid code blocks) that can significantly degrade downstream usability. We present FMBench, a benchmark for adaptive Markdown output formatting that evaluates models under a wide range of instruction-following scenarios with diverse structural requirements. FMBench emphasizes real-world formatting behaviors such as multi-level organization, mixed content (natural language interleaved with lists/tables/code), and strict adherence to user-specified layout constraints. To improve Markdown compliance without relying on hard decoding constraints, we propose a lightweight alignment pipeline that combines supervised fine-tuning (SFT) with reinforcement learning fine-tuning. Starting from a base model, we first perform SFT on instruction-response pairs, and then optimize a composite objective that balances semantic fidelity with structural correctness. Experiments on two model families (OpenPangu and Qwen) show that SFT consistently improves semantic alignment, while reinforcement learning provides additional gains in robustness to challenging Markdown instructions when initialized from a strong SFT policy. Our results also reveal an inherent trade-off between semantic and structural objectives, highlighting the importance of carefully designed rewards for reliable formatted generation. Code is available at: https://github.com/FudanCVL/FMBench.

Agentic reasoning enables large reasoning models (LRMs) to dynamically acquire external knowledge, but yet optimizing the retrieval process remains challenging due to the lack of dense, principled reward signals. In this paper, we introduce InfoReasoner, a unified framework that incentivizes effective information seeking via a synthetic semantic information gain reward. Theoretically, we redefine information gain as uncertainty reduction over the model's belief states, establishing guarantees, including non-negativity, telescoping additivity, and channel monotonicity. Practically, to enable scalable optimization without manual retrieval annotations, we propose an output-aware intrinsic estimator that computes information gain directly from the model's output distributions using semantic clustering via bidirectional textual entailment. This intrinsic reward guides the policy to maximize epistemic progress, enabling efficient training via Group Relative Policy Optimxization (GRPO). Experiments across seven question-answering benchmarks demonstrate that InfoReasoner consistently outperforms strong retrieval-augmented baselines, achieving up to 5.4% average accuracy improvement. Our work provides a theoretically grounded and scalable path toward agentic reasoning with retrieval.

Reinforcement learning (RL) is increasingly used to post-train medical Vision-Language Models (VLMs), yet it remains unclear whether RL improves medical visual reasoning or mainly sharpens behaviors already induced by supervised fine-tuning (SFT). We present a controlled study that disentangles these effects along three axes: vision, SFT, and RL. Using MedMNIST as a multi-modality testbed, we probe visual perception by benchmarking VLM vision towers against vision-only baselines, quantify reasoning support and sampling efficiency via Accuracy@1 versus Pass@K, and evaluate when RL closes the support gap and how gains transfer across modalities. We find that RL is most effective when the model already has non-trivial support (high Pass@K): it primarily sharpens the output distribution, improving Acc@1 and sampling efficiency, while SFT expands support and makes RL effective. Based on these findings, we propose a boundary-aware recipe and instantiate it by RL post-training an OctoMed-initialized model on a small, balanced subset of PMC multiple-choice VQA, achieving strong average performance across six medical VQA benchmarks.

Large Language Models (LLMs) in agentic workflows combine multi-step reasoning, tool use, and collaboration across multiple specialized agents. Existing LLM serving engines optimize individual calls in isolation, while multi-agent frameworks focus on orchestration without system-level performance planning. As a result, repeated prompts, overlapping contexts, and concurrent executions create substantial redundancy and poor GPU utilization, especially in batch analytics scenarios. We introduce Halo, a system that brings batch query processing and optimization into agentic LLM workflows. Halo represents each workflow as a structured query plan DAG and constructs a consolidated graph for batched queries that exposes shared computation. Guided by a cost model that jointly considers prefill and decode costs, cache reuse, and GPU placement, Halo performs plan-level optimization to minimize redundant execution. Its runtime integrates adaptive batching, KV-cache sharing and migration, along with compute-communication overlap to maximize hardware efficiency. Evaluation across six benchmarks shows that Halo achieves up to 18.6x speedup for batch inference and 4.7x throughput improvement under online serving, scaling to workloads of tens of thousands of queries and complex graphs. These gains are achieved without compromising output quality. By unifying query optimization with LLM serving, Halo enables efficient agentic workflows in data analytics and decision-making applications.

Spatial competence is the quality of maintaining a consistent internal representation of an environment and using it to infer discrete structure and plan actions under constraints. Prevailing spatial evaluations for large models are limited to probing isolated primitives through 3D transformations or visual question answering. We introduce the Spatial Competence Benchmark (SCBench), spanning three hierarchical capability buckets whose tasks require executable outputs verified by deterministic checkers or simulator-based evaluators. On SCBench, three frontier models exhibit monotonically decreasing accuracy up the capability ladder. Sweeping output-token caps shows that accuracy gains concentrate at low budgets and saturate quickly, and failures are dominated by locally plausible geometry that breaks global constraints. We release the task generators, verifiers, and visualisation tooling.

We study whether a structured recurrent state can serve as a compact associative backbone for language modeling while still supporting exact retrieval. We introduce UniMatrix, a Universal Transformer style family that reuses a shared recurrent block across depth and augments it with hybrid state updates, a ROSA-style residual path, and token-conditioned embedding modulation. We evaluate these models on byte-level WikiText-2, synthetic associative recall, throughput profiling on Apple MPS, and a corrected benchmark for triple-token interactions. At small scale, UniMatrix-Core and UniMatrix-ROSA slightly outperform a parameter-matched Transformer on WikiText-2 while using many fewer parameters, reaching 5.084 and 5.083 bits-per-byte versus 5.124. The main negative result is equally important: on associative recall, the original UniMatrix family remains near chance while the Transformer reaches 25.4 percent, showing that compressed recurrent state alone is not enough for exact lookup. A retrieval-oriented follow-up, UniMatrix-Assoc, helps only marginally. By contrast, UniMatrix-SparsePointer, which adds sparse slot routing and direct pointer-logit fusion, reaches 75.6 percent on the original pilot recipe and 99.2 percent on a no-dropout follow-up while using 53.8 percent fewer parameters than the Transformer baseline. Ablations show that the gain comes from sufficient slot capacity and exact pointer-level output routing. Overall, structured recurrent state is promising and parameter-efficient, but strong long-range behavior still requires explicit sparse retrieval and better kernels.

Near-field multiple-input multiple-output (MIMO) radar imaging systems have recently gained significant attention. In this paper, we develop novel non-iterative deep learning-based reconstruction methods for real-time near-field MIMO imaging. The goal is to achieve high image quality with low computational cost at compressive settings. The developed approaches have two stages. In the first approach, physics-based initial stage performs adjoint operation to back-project the measurements to the image-space, and deep neural network (DNN)-based second stage converts the 3D backprojected measurements to a magnitude-only reflectivity image. Since scene reflectivities often have random phase, DNN processes directly the magnitude of the adjoint result. As DNN, 3D U-Net is used to jointly exploit range and cross-range correlations. To comparatively evaluate the significance of exploiting physics in a learning-based approach, two additional approaches that replace the physics-based first stage with fully connected layers are also developed as purely learning-based methods. The performance is also analyzed by changing the DNN architecture for the second stage to include complex-valued processing (instead of magnitude-only processing), 2D convolution kernels (instead of 3D), and ResNet architecture (instead of U-Net). Moreover, we develop a synthesizer to generate large-scale dataset for training with 3D extended targets. We illustrate the performance through experimental data and extensive simulations. The results show the effectiveness of the developed physics-based learned reconstruction approach in terms of both run-time and image quality at highly compressive settings. Our source codes and dataset are made available at GitHub.

Diffusion models have recently achieved remarkable success in generative tasks (e.g., image and video generation), and the demand for high-quality content (e.g., 2K/4K videos) is rapidly increasing across various domains. However, generating ultra-high-resolution videos on existing standard-resolution (e.g., 720p) platforms remains challenging due to the excessive re-training requirements and prohibitively high computational and memory costs. To this end, we introduce SuperGen, an efficient tile-based framework for ultra-high-resolution video generation. SuperGen features a novel training-free algorithmic innovation with tiling to successfully support a wide range of resolutions without additional training efforts while significantly reducing both memory footprint and computational complexity. Moreover, SuperGen incorporates a tile-tailored, adaptive, region-aware caching strategy that accelerates video generation by exploiting redundancy across denoising steps and spatial regions. SuperGen also integrates cache-guided, communication-minimized tile parallelism for enhanced throughput and minimized latency. Evaluations demonstrate that SuperGen harvests the maximum performance gains while achieving high output quality across various benchmarks.

Improving reasoning capabilities of Large Language Models (LLMs), especially under parameter constraints, is crucial for real-world applications. Prior work proposes recurrent transformers, which allocate a fixed number of extra iterations per token to improve generation quality. After the first, standard forward pass, instead of verbalization, last-layer hidden states are fed back as inputs for additional iterations to refine token predictions. Yet we identify a latent overthinking phenomenon: easy token predictions that are already correct after the first pass are sometimes revised into errors in additional iterations. To address this, we propose Think-at-Hard (TaH), a dynamic latent thinking method that iterates deeper only at hard tokens. It employs a lightweight neural decider to trigger latent iterations only at tokens that are likely incorrect after the standard forward pass. During latent iterations, Low-Rank Adaptation (LoRA) modules shift the LLM objective from general next-token prediction to focused hard-token refinement. We further introduce a duo-causal attention mechanism that extends attention from the token sequence dimension to an additional iteration depth dimension. This enables cross-iteration information flow while maintaining full sequential parallelism. Experiments show that TaH boosts LLM reasoning performance across five challenging benchmarks while maintaining the same parameter count. Compared with baselines that iterate twice for all output tokens, TaH delivers 8.1-11.3% accuracy gains while exempting 94% of tokens from the second iteration. Against strong single-iteration Qwen3 models finetuned with the same data, it also delivers 4.0-5.0% accuracy gains. When allowing less than 3% additional parameters from LoRA and the iteration decider, the gains increase to 8.5-12.6% and 5.3-5.4%, respectively. Our code is available at https://github.com/thu-nics/TaH.

Differentiable Logic Gate Networks (DLGNs) are a very fast and energy-efficient alternative to conventional feed-forward networks. With learnable combinations of logical gates, DLGNs enable fast inference by hardware-friendly execution. Since the concept of DLGNs has only recently gained attention, these networks are still in their developmental infancy, including the design and scalability of their output layer. To date, this architecture has primarily been tested on datasets with up to ten classes. This work examines the behavior of DLGNs on large multi-class datasets. We investigate its general expressiveness, its scalability, and evaluate alternative output strategies. Using both synthetic and real-world datasets, we provide key insights into the importance of temperature tuning and its impact on output layer performance. We evaluate conditions under which the Group-Sum layer performs well and how it can be applied to large-scale classification of up to 2000 classes.

Although Long Reasoning Models (LRMs) have achieved superior performance on various reasoning scenarios, they often suffer from increased computational costs and inference latency caused by overthinking. To address these limitations, we propose Adaptive Dual Reasoner, which supports two reasoning modes: fast thinking and slow thinking. ADR dynamically alternates between these modes based on the contextual complexity during reasoning. ADR is trained in two stages: (1) A cold-start stage using supervised fine-tuning (SFT) to equip the model with the ability to integrate both fast and slow reasoning modes, in which we construct a hybrid reasoning dataset through a dedicated pipeline to provide large-scale supervision. (2) A reinforcement learning stage for optimizing reasoning effort, where we introduce Entropy-guided Hybrid Policy Optimization EHPO, an RL training framework employing an entropy-guided dynamic rollout strategy for branching at high-entropy units and a difficulty-aware penalty to balance fast and slow reasoning. Across challenging mathematical reasoning benchmarks, ADR achieves an effective balance between reasoning performance and efficiency among state-of-the-art approaches. Specifically, ADR yields a performance gain of up to 6.1%, while reducing the reasoning output length by 49.5% to 59.3%.

In recent years, safety risks associated with large language models have become increasingly prominent, highlighting the urgent need to mitigate the generation of toxic and harmful content. The mainstream paradigm for LLM safety alignment typically adopts a collaborative framework involving three roles: an attacker for adversarial prompt generation, a defender for safety defense, and an evaluator for response assessment. In this paper, we propose a closed-loop reinforcement learning framework called TriPlay-RL that enables iterative and co-improving collaboration among three roles with near-zero manual annotation. Experimental results show that the attacker preserves high output diversity while achieving a 20%-50% improvement in adversarial effectiveness; the defender attains 10%-30% gains in safety performance without degrading general reasoning capability; and the evaluator continuously refines its fine-grained judgment ability through iterations, accurately distinguishing unsafe responses, simple refusals, and useful guidance. Overall, our framework establishes an efficient and scalable paradigm for LLM safety alignment, enabling continuous co-evolution within a unified learning loop.

Visual latent reasoning lets a multimodal large language model (MLLM) create intermediate visual evidence as continuous tokens, avoiding external tools or image generators. However, existing methods usually follow an output-as-input latent paradigm and yield unstable gains. We identify evidence for a feature-space mismatch that can contribute to this instability: dominant visual-latent models build on pre-norm MLLMs and reuse decoder hidden states as predicted latent inputs, even though these states occupy a substantially different norm regime from the input embeddings the model was trained to consume (Xie et al., 2025; Li et al., 2026; Team et al., 2026). This mismatch can make direct latent feedback unreliable. Motivated by this diagnosis, we propose GAP, a Granular Alignment Paradigm for visual latent modeling. GAP aligns visual latent reasoning at three levels: feature-level alignment maps decoder outputs into input-compatible visual latents through a lightweight PCA-aligned latent head; context-level alignment grounds latent targets with inspectable auxiliary visual supervision; and capacity-guided alignment assigns latent supervision selectively to examples where the base MLLM struggles. On Qwen2.5-VL 7B, the resulting model achieves the best mean aggregate perception and reasoning performance among our supervised variants. Inference-time intervention probing further suggests that generated latents provide task-relevant visual signal beyond merely adding token slots.

Large Reasoning Models (LRMs) often suffer from overthinking, generating unnecessarily long reasoning chains even for simple tasks. This leads to substantial computational overhead with limited performance gain, primarily due to redundant verification and repetitive generation. While prior work typically constrains output length or optimizes correctness, such coarse supervision fails to guide models toward concise yet accurate inference. In this paper, we propose ENTRA, an entropy-based training framework that suppresses redundant reasoning while preserving performance. ENTRA first estimates the token-level importance using a lightweight Bidirectional Importance Estimation (BIE) method, which accounts for both prediction confidence and forward influence. It then computes a redundancy reward based on the entropy of low-importance tokens, normalized by its theoretical upper bound, and optimizes this reward via reinforcement learning. Experiments on mathematical reasoning benchmarks demonstrate that ENTRA reduces output length by 37% to 53% with no loss-and in some cases, gains-in accuracy. Our approach offers a principled and efficient solution to reduce overthinking in LRMs, and provides a generalizable path toward redundancy-aware reasoning optimization.

While it is important to make implantable brain-machine interfaces (iBMI) wireless to increase patient comfort and safety, the trend of increased channel count in recent neural probes poses a challenge due to the concomitant increase in the data rate. Extracting information from raw data at the source by using edge computing is a promising solution to this problem, with integrated intention decoders providing the best compression ratio. Recent benchmarking efforts have shown recurrent neural networks to be the best solution. Spiking Neural Networks (SNN) emerge as a promising solution for resource efficient neural decoding while Long Short Term Memory (LSTM) networks achieve the best accuracy. In this work, we show that combining traditional signal processing techniques, namely signal filtering, with SNNs improve their decoding performance significantly for regression tasks, closing the gap with LSTMs, at little added cost. Results with different filters are shown with Bessel filters providing best performance. Two block-bidirectional Bessel filters have been used--one for low latency and another for high accuracy. Adding the high accuracy variant of the Bessel filters to the output of ANN, SNN and variants provided statistically significant benefits with maximum gains of approx 5% and 8% in R^2 for two SNN topologies (SNN\_Streaming and SNN\_3D). Our work presents state of the art results for this dataset and paves the way for decoder-integrated-implants of the future.

Large Reasoning Models (LRMs) have achieved impressive performance on challenging tasks, yet their deep reasoning often incurs substantial computational costs. To achieve efficient reasoning, existing reinforcement learning methods still struggle to construct short reasoning path during the rollout stage, limiting effective learning. Inspired by Evidence Accumulation Models, we find that LRMs have accumulated sufficient information early in reasoning, making further reasoning steps redundant. Based on this insight, we propose Just-Enough Thinking (JET), which trains models to proactively terminate unnecessary reasoning. JET performs trajectory truncation during rollout to expose the model to short, distributionally consistent reasoning paths. Besides, it uses a quality-controlled length reward to better encourage concise reasoning while maintaining correctness. Extensive experiments demonstrate that JET significantly improves reasoning efficiency without sacrificing accuracy. Especially, DeepSeek-Distill-Qwen-1.5B achieves a 4.6% accuracy gain while reducing output length by 46.3% on the Olympiad benchmark. Our code is available in the GitHub.

Diffusion-based large language models (dLLMs) have emerged as a promising alternative to autoregressive (AR) LLMs, leveraging denoising-based generation to enable inherent parallelism. Even more and more open-sourced dLLM models emerge, yet their widespread adoption remains constrained by the lack of a standardized and efficient inference framework. We present dInfer, an efficient and extensible framework for dLLM inference. dInfer decomposes the inference pipeline into four modular components--model, diffusion iteration manager, decoding strategy, and KV-cache manager--and integrates novel algorithms for each component alongside system-level optimizations. Through this combination of algorithmic innovations and system enhancements, dInfer achieves substantial efficiency gains without compromising output quality on LLaDA-MoE. At batch size 1, it surpasses 1,100 tokens per second on HumanEval and averages over 800 tokens per second across six benchmarks on 8times H800 GPUs. Compared to prior systems, dInfer delivers a 10times speedup over Fast-dLLM while maintaining similar model performance. Even compared to the AR model (with a comparable number of activation parameters and performance) QWen2.5-3B, which is highly optimized with the latest vLLM inference engine, dInfer still delivers a 2-3times speedup. The implementation of dInfer is open-sourced at https://github.com/inclusionAI/dInfer.

Since large language models (LLMs) have a tendency to generate factually inaccurate output, retrieval-augmented generation (RAG) has gained significant attention as a key means to mitigate this downside of harnessing only LLMs. However, existing RAG methods for simple and multi-hop question answering (QA) are still prone to incorrect retrievals and hallucinations. To address these limitations, we propose CoopRAG, a novel RAG framework for the question answering task in which a retriever and an LLM work cooperatively with each other by exchanging informative knowledge, and the earlier and later layers of the retriever model work cooperatively with each other to accurately rank the retrieved documents relevant to a given query. In this framework, we (i) unroll a question into sub-questions and a reasoning chain in which uncertain positions are masked, (ii) retrieve the documents relevant to the question augmented with the sub-questions and the reasoning chain, (iii) rerank the documents by contrasting layers of the retriever, and (iv) reconstruct the reasoning chain by filling the masked positions via the LLM. Our experiments demonstrate that CoopRAG consistently outperforms state-of-the-art QA methods on three multi-hop QA datasets as well as a simple QA dataset in terms of both the retrieval and QA performances. Our code is available.

We introduce VAREX (VARied-schema EXtraction), a benchmark for evaluating multimodal foundation models on structured data extraction from government forms. VAREX employs a Reverse Annotation pipeline that programmatically fills PDF templates with synthetic values, producing deterministic ground truth validated through three-phase quality assurance. The benchmark comprises 1,777 documents with 1,771 unique schemas across three structural categories, each provided in four input modalities: plain text, layout-preserving text (whitespace-aligned to approximate column positions), document image, or both text and image combined. Unlike existing benchmarks that evaluate from a single input representation, VAREX provides four controlled modalities per document, enabling systematic ablation of how input format affects extraction accuracy -- a capability absent from prior benchmarks. We evaluate 20 models from frontier proprietary models to small open models, with particular attention to models <=4B parameters suitable for cost-sensitive and latency-constrained deployment. Results reveal that (1) below 4B parameters, structured output compliance -- not extraction capability -- is a dominant bottleneck; in particular, schema echo (models producing schema-conforming structure instead of extracted values) depresses scores by 45-65 pp (percentage points) in affected models; (2) extraction-specific fine-tuning at 2B yields +81 pp gains, demonstrating that the instruction-following deficit is addressable without scale; (3) layout-preserving text provides the largest accuracy gain (+3-18 pp), exceeding pixel-level visual cues; and (4) the benchmark most effectively discriminates models in the 60-95% accuracy band. Dataset and evaluation code are publicly available.

The quantity that defines the behavior of a dynamic range compressor is the time-varying gain applied to the signal as a function of the input level. However, models of these devices are typically evaluated using proxy metrics because isolating the gain reduction signal from the audio input-output data included in existing datasets creates an ill-conditioned inverse problem. It is unclear how accurately these metrics describe the behavior the model is tasked with emulating, particularly as waveform-based metrics can be influenced by secondary effects introduced by analog processing and capture, even when those effects are inaudible. We investigate a method of evaluation in which the gain-reduction signal produced by a model is measured directly against a gain-reduction control voltage signal produced by the hardware. To evaluate the efficacy of this metric as a learning objective, a gray-box model is trained using loss computed directly over the gain control signals alongside two models trained using common proxy losses. The models trained using proxy losses did not achieve parity with models trained directly on the gain control signal when evaluated with respect to the underlying control trajectory, and the waveform-domain metrics assigned similar errors to models that were clearly separated by the direct metric. To facilitate further exploration of this method of evaluation, we present a Solid State Logic bus compressor dataset that includes the gain control voltage signal captured alongside the audio output.

The number of large language models (LLMs) with varying parameter scales and vocabularies is increasing. While they deliver powerful performance, they also face a set of common optimization needs to meet specific requirements or standards, such as instruction following or avoiding the output of sensitive information from the real world. However, how to reuse the fine-tuning outcomes of one model to other models to reduce training costs remains a challenge. To bridge this gap, we introduce Cross-model Control (CMC), a method that improves multiple LLMs in one-time training with a portable tiny language model. Specifically, we have observed that the logit shift before and after fine-tuning is remarkably similar across different models. Based on this insight, we incorporate a tiny language model with a minimal number of parameters. By training alongside a frozen template LLM, the tiny model gains the capability to alter the logits output by the LLMs. To make this tiny language model applicable to models with different vocabularies, we propose a novel token mapping strategy named PM-MinED. We have conducted extensive experiments on instruction tuning and unlearning tasks, demonstrating the effectiveness of CMC. Our code is available at https://github.com/wujwyi/CMC.

Reinforcement Learning with Verifiable Rewards (RLVR) has demonstrated promising gains in enhancing the reasoning capabilities of large language models. However, its dependence on domain-specific verifiers significantly restricts its applicability to open and general domains. Recent efforts such as RLPR have extended RLVR to general domains, enabling training on broader datasets and achieving improvements over RLVR. However, a notable limitation of these methods is their tendency to overfit to reference answers, which constrains the model's ability to generate diverse outputs. This limitation is particularly pronounced in open-ended tasks such as writing, where multiple plausible answers exist. To address this, we propose DARL, a simple yet effective reinforcement learning framework that encourages the generation of diverse answers within a controlled deviation range from the reference while preserving alignment with it. Our framework is fully compatible with existing general reinforcement learning methods and can be seamlessly integrated without additional verifiers. Extensive experiments on thirteen benchmarks demonstrate consistent improvements in reasoning performance. Notably, DARL surpasses RLPR, achieving average gains of 1.3 points on six reasoning benchmarks and 9.5 points on seven general benchmarks, highlighting its effectiveness in improving both reasoning accuracy and output diversity.

Supervised fine-tuning (SFT) and reinforcement learning (RL) are widely used post-training techniques for foundation models. However, their roles in enhancing model generalization capabilities remain unclear. This paper studies the difference between SFT and RL on generalization and memorization, focusing on text-based rule variants and visual variants. We introduce GeneralPoints, an arithmetic reasoning card game, and adopt V-IRL, a real-world navigation environment, to assess how models trained with SFT and RL generalize to unseen variants in both textual and visual domains. We show that RL, especially when trained with an outcome-based reward, generalizes across both rule-based textual and visual variants. SFT, in contrast, tends to memorize training data and struggles to generalize out-of-distribution scenarios. Further analysis reveals that RL improves the model's underlying visual recognition capabilities, contributing to its enhanced generalization in the visual domain. Despite RL's superior generalization, we show that SFT remains essential for effective RL training; SFT stabilizes the model's output format, enabling subsequent RL to achieve its performance gains. These findings demonstrates the capability of RL for acquiring generalizable knowledge in complex, multi-modal tasks.

The dominance of large decoder-only language models has overshadowed encoder-decoder architectures, despite their fundamental efficiency advantages in sequence processing. For small language models (SLMs) - those with 1 billion parameters or fewer - our systematic analysis across GPU, CPU, and NPU platforms reveals that encoder-decoder architectures achieve 47% lower first-token latency and 4.7x higher throughput compared to decoder-only models on edge devices. These gains may be attributed to encoder-decoder's one-time input processing and efficient separation of understanding and generation phases. We introduce a novel knowledge distillation framework that enables encoder-decoder models to leverage capabilities from large scalable decoder-only teachers while preserving their architectural advantages, achieving up to 6 average performance points improvement across diverse tasks, with significant gains in asymmetric sequence tasks where input and output distributions can benefit from different processing approaches. When combined with modern advances like Rotary Positional Embeddings (RoPE) and Vision encoders, our systematic investigation demonstrates that encoder-decoder architectures provide a more practical path toward deploying capable language models in resource-constrained environments. Our findings challenge the prevailing trend toward decoder-only scaling, showing that architectural choices become increasingly crucial as parameter budgets decrease, particularly for on-device and edge deployments where computational efficiency is paramount.

This technical report introduces AngelSlim, a comprehensive and versatile toolkit for large model compression developed by the Tencent Hunyuan team. By consolidating cutting-edge algorithms, including quantization, speculative decoding, token pruning, and distillation. AngelSlim provides a unified pipeline that streamlines the transition from model compression to industrial-scale deployment. To facilitate efficient acceleration, we integrate state-of-the-art FP8 and INT8 Post-Training Quantization (PTQ) algorithms alongside pioneering research in ultra-low-bit regimes, featuring HY-1.8B-int2 as the first industrially viable 2-bit large model. Beyond quantization, we propose a training-aligned speculative decoding framework compatible with multimodal architectures and modern inference engines, achieving 1.8x to 2.0x throughput gains without compromising output correctness. Furthermore, we develop a training-free sparse attention framework that reduces Time-to-First-Token (TTFT) in long-context scenarios by decoupling sparse kernels from model architectures through a hybrid of static patterns and dynamic token selection. For multimodal models, AngelSlim incorporates specialized pruning strategies, namely IDPruner for optimizing vision tokens via Maximal Marginal Relevance and Samp for adaptive audio token merging and pruning. By integrating these compression strategies from low-level implementations, AngelSlim enables algorithm-focused research and tool-assisted deployment.

Recently, Multimodal Large Language Models (MLLMs) have demonstrated significant potential in complex visual tasks through the integration of Chain-of-Thought (CoT) reasoning. However, in Video Question Answering, extended thinking processes do not consistently yield performance gains and may even lead to degradation due to ``visual anchor drifting'', where models increasingly rely on self-generated text, sidelining visual inputs and causing hallucinations. While existing mitigations typically introduce specific mechanisms for the model to re-attend to visual inputs during inference, these approaches often incur prohibitive training costs and suffer from poor generalizability across different architectures. To address this, we propose FrameRepeat, an automated enhancement framework which features a lightweight repeat scoring module that enables Video-LLMs to autonomously identify which frames should be reinforced. We introduce a novel training strategy, Add-One-In (AOI), that uses MLLM output probabilities to generate supervision signals representing repeat gain. This can be used to train a frame scoring network, which guides the frame repetition behavior. Experimental results across multiple models and datasets demonstrate that FrameRepeat is both effective and generalizable in strengthening important visual cues during the reasoning process.

Large language model (LLM) decoding is latency-sensitive and often bottlenecked by fragmented operator execution and repeated off-chip materialization of intermediate tensors. Prior work expands fusion scope by leveraging thread-block clusters and on-chip inter-block collectives to fuse attention-side operators such as QKV projection, attention, and output projection. We develop ClusterFusion++, a CUDA-level extension that broadens fusion to the full Transformer decoder block for GPT-NeoX/Pythia models: LayerNorm -> QKV -> RoPE -> decode attention -> output projection -> Post-LN -> MLP -> residual. We additionally engineer a CUDA-Graph-compatible execution mode with persistent Tensor Memory Accelerator (TMA) descriptors to reduce per-step overhead. On an NVIDIA RTX 5090-class GPU, ClusterFusion++ improves throughput by 1.34x for Pythia-2.8B and yields similar gains for Pythia-6.9B, while maintaining high output fidelity (near-token-identical generation, with minor non-determinism from FP16 atomics).

Millimeter-wave (mmWave) and Terahertz (THz)-band communications hold great promise in meeting the growing data-rate demands of next-generation wireless networks, offering abundant bandwidth. To mitigate the severe path loss inherent to these high frequencies and reduce hardware costs, ultra-massive multiple-input multiple-output (UM-MIMO) systems with hybrid beamforming architectures can deliver substantial beamforming gains and enhanced spectral efficiency. However, accurate channel estimation (CE) in mmWave and THz UM-MIMO systems is challenging due to high channel dimensionality and compressed observations from a limited number of RF chains, while the hybrid near- and far-field radiation patterns, arising from large array apertures and high carrier frequencies, further complicate CE. Conventional compressive sensing based frameworks rely on predefined sparsifying matrices, which cannot faithfully capture the hybrid near-field and far-field channel structures, leading to degraded estimation performance. This paper introduces DiffPace, a diffusion-based plug-and-play method for channel estimation. DiffPace uses a diffusion model (DM) to capture the channel distribution based on the hybrid spherical and planar-wave (HPSM) model. By applying the plug-and-play approach, it leverages the DM as prior knowledge, improving CE accuracy. Moreover, DM performs inference by solving an ordinary differential equation, minimizing the number of required inference steps compared with stochastic sampling method. Experimental results show that DiffPace achieves competitive CE performance, attaining -15 dB normalized mean square error (NMSE) at a signal-to-noise ratio (SNR) of 10 dB, with 90\% fewer inference steps compared to state-of-the-art schemes, simultaneously providing high estimation precision and enhanced computational efficiency.

Recent developments in generative AI have shone a spotlight on high-performance synthetic text generation technologies. The now wide availability and ease of use of such models highlights the urgent need to provide equally powerful technologies capable of identifying synthetic text. With this in mind, we draw inspiration from psychological studies which suggest that people can be driven by emotion and encode emotion in the text they compose. We hypothesize that pretrained language models (PLMs) have an affective deficit because they lack such an emotional driver when generating text and consequently may generate synthetic text which has affective incoherence i.e. lacking the kind of emotional coherence present in human-authored text. We subsequently develop an emotionally aware detector by fine-tuning a PLM on emotion. Experiment results indicate that our emotionally-aware detector achieves improvements across a range of synthetic text generators, various sized models, datasets, and domains. Finally, we compare our emotionally-aware synthetic text detector to ChatGPT in the task of identification of its own output and show substantial gains, reinforcing the potential of emotion as a signal to identify synthetic text. Code, models, and datasets are available at https: //github.com/alanagiasi/emoPLMsynth

Although large language models (LLMs) have demonstrated impressive potential on simple tasks, their breadth of scope, lack of transparency, and insufficient controllability can make them less effective when assisting humans on more complex tasks. In response, we introduce the concept of Chaining LLM steps together, where the output of one step becomes the input for the next, thus aggregating the gains per step. We first define a set of LLM primitive operations useful for Chain construction, then present an interactive system where users can modify these Chains, along with their intermediate results, in a modular way. In a 20-person user study, we found that Chaining not only improved the quality of task outcomes, but also significantly enhanced system transparency, controllability, and sense of collaboration. Additionally, we saw that users developed new ways of interacting with LLMs through Chains: they leveraged sub-tasks to calibrate model expectations, compared and contrasted alternative strategies by observing parallel downstream effects, and debugged unexpected model outputs by "unit-testing" sub-components of a Chain. In two case studies, we further explore how LLM Chains may be used in future applications

While autoregressive (AR) modeling has recently emerged as a new paradigm in visual generation, its practical adoption is severely constrained by the slow inference speed of per-token generation, which often requires thousands of steps to produce a single sample. To address this challenge, we propose MC-SJD, a training-free, lossless parallel decoding framework designed to accelerate AR visual generation by extending the recently introduced Speculative Jacobi Decoding (SJD). Although SJD shows strong potential for accelerating AR generation, we demonstrate that token instability across iterations significantly reduces the acceptance rate, a limitation that primarily arises from the independent sampling process used during draft token generation. To overcome this, we introduce MC-SJD, an information-theoretic approach based on coupling, which substantially accelerates standard SJD by maximizing the probability of sampling identical draft tokens across consecutive iterations, all while preserving its lossless property. Remarkably, this method requires only a single-line modification to the existing algorithm, yet achieves substantial performance gains, delivering up to a ~4.2x acceleration in image generation and ~13.3x acceleration in video generation compared to standard AR decoding, without any degradation in output quality.

We propose a general two-stage algorithm that enjoys a provable scaling law for the test-time compute of large language models (LLMs). Given an input problem, the proposed algorithm first generates N candidate solutions, and then chooses the best one via a multiple-round knockout tournament where each pair of candidates are compared for K times and only the winners move on to the next round. In a minimalistic implementation, both stages can be executed with a black-box LLM alone and nothing else (e.g., no external verifier or reward model), and a total of N times (K + 1) highly parallelizable LLM calls are needed for solving an input problem. Assuming that a generated candidate solution is correct with probability p_{gen} > 0 and a comparison between a pair of correct and incorrect solutions identifies the right winner with probability p_{comp} > 0.5 (i.e., better than a random guess), we prove theoretically that the failure probability of the proposed algorithm decays to zero exponentially with respect to N and K: $P(final output is incorrect) le (1 - p_{gen})^N + lceil log_2 N rceil e^{-2 K (p_{comp} - 0.5)^2}.$ Our empirical results with the challenging MMLU-Pro benchmark validate the technical assumptions, as well as the efficacy of the proposed algorithm and the gains from scaling up its test-time compute.

Language model fine-tuning is essential for modern natural language processing, but is computationally expensive and time-consuming. Further, the effectiveness of fine-tuning is limited by the inclusion of training examples that negatively affect performance. Here we present a general fine-tuning method that we call information gain filtration for improving the overall training efficiency and final performance of language model fine-tuning. We define the information gain of an example as the improvement on a test metric after training on that example. A secondary learner is then trained to approximate this quantity. During fine-tuning, this learner selects informative examples and skips uninformative ones. We show that our method has consistent improvement across datasets, fine-tuning tasks, and language model architectures. For example, we achieve a median perplexity of 54.0 on a books dataset compared to 57.3 for standard fine-tuning. We present statistical evidence that offers insight into the improvements of our method over standard fine-tuning. The generality of our method leads us to propose a new paradigm for language model fine-tuning -- we encourage researchers to release pretrained secondary learners on common corpora to promote efficient and effective fine-tuning, thereby improving the performance and reducing the overall energy footprint of language model fine-tuning.

On-policy distillation (OPD) is widely used for LLM post-training. When pushed with a reward-extrapolation coefficient lambda > 1, the student can lift past the teacher in domain, but past a threshold lambda* the same step violates the output contract on structured-output tasks. In a single-position Bernoulli reduction, we derive a closed-form base-relative clip-safety threshold lambda*(p,b,c) determined by three measurable quantities: the teacher modal probability, the warm-start mass, and the importance-sampling clip strength. Above lambda*, the extrapolated fixed point exits the clip-safe region, changing training from format-preserving to format-collapsing. We extend the rule to calibrated K-ary listwise JSON tasks where a single binding equivalence class dominates the output contract and SFT retains parse headroom. On Amazon Fashion, three pre-registered tests--a fine-grid cliff interval, a budget-extension test, and a small-clip cross-prediction--fall within their locked prediction windows, with the small-clip value matching the closed-form prediction below grid resolution. Operating just below lambda*, ListOPD brings a 1.7B Qwen3 student to in-domain parity with an 8B-SFT baseline at one-fifth the parameters. The gain is driven primarily by format adherence: NDCG@1 on parsed outputs remains flat across lambda, while parse validity sharply changes at the predicted boundary. The cliff diagnostic is rubric-independent, whereas the parity claim uses a Gemini-graded rubric and inherits that evaluator's exposure.

We develop an online learning algorithm that dramatically improves the data efficiency of reinforcement learning from human feedback (RLHF). Our algorithm incrementally updates reward and language models as choice data is received. The reward model is fit to the choice data, while the language model is updated by a variation of reinforce, with reinforcement signals provided by the reward model. Several features enable the efficiency gains: a small affirmative nudge added to each reinforcement signal, an epistemic neural network that models reward uncertainty, and information-directed exploration. With Gemma large language models (LLMs), our algorithm matches the performance of offline RLHF trained on 200K labels using fewer than 20K labels, representing more than a 10x gain in data efficiency. Extrapolating from our results, we expect our algorithm trained on 1M labels to match offline RLHF trained on 1B labels. This represents a 1,000x gain. To our knowledge, these are the first results to demonstrate that such large improvements are possible.

State-of-the-art AI systems can be significantly improved without expensive retraining via "post-training enhancements"-techniques applied after initial training like fine-tuning the system to use a web browser. We review recent post-training enhancements, categorizing them into five types: tool-use, prompting methods, scaffolding, solution selection, and data generation. Different enhancements improve performance on different tasks, making it hard to compare their significance. So we translate improvements from different enhancements into a common currency, the compute-equivalent gain: how much additional training compute would be needed to improve performance by the same amount as the enhancement. Our non-experimental work shows that post-training enhancements have significant benefits: most surveyed enhancements improve benchmark performance by more than a 5x increase in training compute, some by more than 20x. Post-training enhancements are relatively cheap to develop: fine-tuning costs are typically <1% of the original training cost. Governing the development of capable post-training enhancements may be challenging because frontier models could be enhanced by a wide range of actors.

Ranking and scoring are ubiquitous. We consider the setting in which an institution, called a ranker, evaluates a set of individuals based on demographic, behavioral or other characteristics. The final output is a ranking that represents the relative quality of the individuals. While automatic and therefore seemingly objective, rankers can, and often do, discriminate against individuals and systematically disadvantage members of protected groups. This warrants a careful study of the fairness of a ranking scheme. In this paper we propose fairness measures for ranked outputs. We develop a data generation procedure that allows us to systematically control the degree of unfairness in the output, and study the behavior of our measures on these datasets. We then apply our proposed measures to several real datasets, and demonstrate cases of unfairness. Finally, we show preliminary results of incorporating our ranked fairness measures into an optimization framework, and show potential for improving fairness of ranked outputs while maintaining accuracy.

Independently trained domain specialists can be fused post-hoc into a single model that outperforms any individual specialist, and the gain is predictable: gain = 0.82 x divergence - 2.72 (R^2 = 0.856, n=6, 3-26% divergence). This enables practitioners to estimate cooperative value before committing compute. Below ~3.3% divergence, gains approach zero.In the KALAVAI protocol, contributors fine-tune copies of a shared checkpoint independently, then submit for lightweight MoE routing (500 steps). Gains are consistent: +7.72% at 410M (+/-0.02%, 3 seeds), +7.49% at 1B (+/-0.01%, 3 seeds), +6.53% at 6.9B, each over the best specialist. The router matches domain-oracle routing within <10^{-5} nats. Cross-lingual fusion (Tamil/Yoruba/Welsh/Code) achieves +21.76%, with Yoruba perplexity falling 41.9 to 7.7. A 20-contributor federation achieves +16.71% (+/-0.07pp, 3 seeds).Three requirements bound the protocol. Shared initialisation is necessary: checkpoint mismatch degrades routing. Frozen layers are optional below ~10,000 steps and beneficial beyond. Learned routing is essential: uniform averaging degrades by -1.2% vs. best specialist, while any trained router achieves oracle-optimal assignment.

Most reported gains from agent-optimization methods are one-shot: an agent is optimized against a fixed benchmark and the resulting improvement is reported as if it were a stable property of the method. This does not test the setting that matters for deployed agents, where optimization is applied recursively as new failures and new tasks appear over time. The central question this raises is whether optimizer-driven gains compound: after an agent has been optimized once, can it be optimized again on newly arrived tasks without eroding the gains the first round produced? We study this question with a two-phase continual-learning evaluation built from hard tasks in Terminal-Bench 2.0, comparing three approaches to agent-harness optimization (GEPA, Meta Harness, and RELAI's Verifiable Continual Learning, RELAI-VCL) under identical optimization budgets. All three methods improve over the baseline agent in the conventional, static, single-phase setting. However, once new tasks are introduced, the methods diverge sharply: GEPA's optimized agent transfers below the unoptimized baseline, Meta Harness transfers well but fails to improve further once given a second optimization budget, and RELAI-VCL is the only method that both transfers positively to unseen tasks and continues improving after those tasks are folded into the optimization objective, reaching the highest pass rate at every evaluated stage and the highest lifelong average pass rate overall (76.4% vs. 66.0% for GEPA, 64.6% for Meta Harness, and 58.7% for the baseline). Our key observation was that optimization gains compounded only when regression control was built into the optimization loop, providing an inductive bias against shortcut solutions that fail to generalize.

We investigate how teacher-student capacity relationships modulate knowledge distillation (KD) effectiveness in ResNet-based image classification on CIFAR-10. Across three teacher-student pairs -- R50->R18, R34->R18, and R50->R34 -- we compare Logit-KD and Feature-KD under controlled, reproducible conditions (3 seeds, mean+/-std reported throughout). We report three main findings. First, student capacity is a key moderating factor in distillation gain: R34 students benefit substantially more from KD than R18 students even when teacher-student accuracy gaps are comparable, with the strongest gain of +0.30pp observed for R50->R34 Feature-KD versus +0.18pp for R34->R18 Feature-KD and +0.00pp for R34->R18 Logit-KD. Second, implementation correctness critically affects Feature-KD: a gradient clipping bug that excluded projection layers suppressed Feature-KD performance and produced misleading comparisons with Logit-KD. After correction, Feature-KD matches or outperforms Logit-KD in two of three pairs, reaching 95.55% on R50->R34 against a baseline of 95.25%. Third, input-resolution-aware architecture is a prerequisite for effective distillation: correcting the ResNet stem for 32x32 inputs raises teacher accuracy by over 5pp -- an order of magnitude larger than any KD gain. All code and results are available at github.com/umutonuryasar/kd-capacity-gap.

Position controllers have become the dominant interface for executing learned manipulation policies. Yet a critical design decision remains understudied: how should we choose controller gains for policy learning? The conventional wisdom is to select gains based on desired task compliance or stiffness. However, this logic breaks down when controllers are paired with state-conditioned policies: effective stiffness emerges from the interplay between learned reactions and control dynamics, not from gains alone. We argue that gain selection should instead be guided by learnability: how amenable different gain settings are to the learning algorithm in use. In this work, we systematically investigate how position controller gains affect three core components of modern robot learning pipelines: behavior cloning, reinforcement learning from scratch, and sim-to-real transfer. Through extensive experiments across multiple tasks and robot embodiments, we find that: (1) behavior cloning benefits from compliant and overdamped gain regimes, (2) reinforcement learning can succeed across all gain regimes given compatible hyperparameter tuning, and (3) sim-to-real transfer is harmed by stiff and overdamped gain regimes. These findings reveal that optimal gain selection depends not on the desired task behavior, but on the learning paradigm employed. Project website: https://younghyopark.me/tune-to-learn

Conditional computing processes an input using only part of the neural network's computational units. Learning to execute parts of a deep convolutional network by routing individual samples has several advantages: Reducing the computational burden is an obvious advantage. Furthermore, if similar classes are routed to the same path, that part of the network learns to discriminate between finer differences and better classification accuracies can be attained with fewer parameters. Recently, several papers have exploited this idea to take a particular child of a node in a tree-shaped network or to skip parts of a network. In this work, we follow a Trellis-based approach for generating specific execution paths in a deep convolutional neural network. We have designed routing mechanisms that use differentiable information gain-based cost functions to determine which subset of features in a convolutional layer will be executed. We call our method Conditional Information Gain Trellis (CIGT). We show that our conditional execution mechanism achieves comparable or better model performance compared to unconditional baselines, using only a fraction of the computational resources.

An LLM agent's real-task performance is shaped as much by the harness around its model as by the frozen model itself: its prompts, injected knowledge, runtime control, and configuration. In deployment the harness is often the only lever available, so improving it automatically is the natural way to raise performance without touching the weights. The hard part is not generating changes but knowing which one truly helped. Self-generated feedback is noisy, and an apparent gain can be a measurement artifact or an edit that merely overfits the tasks it was tuned on. We present a self-evolving agent-harness framework that separates proposing changes from crediting them: a language model diagnoses failures and proposes patches, while all sampling, measurement, and significance testing are owned by deterministic code, so every credited improvement is trustworthy by construction. Patches populate a gated, categorical quality-diversity archive (GSME) keyed on the (WHERE x WHY) pathology an edit addresses rather than the tasks it fixes, an anti-overfitting inductive bias; generalization is measured on a sealed test scored only after evolution. Across seven domains with a frozen open-weight model, the harness is train-selected and scored once on a sealed test; its credited gains there are +9 to +15.5pp and retain 86-147% of the training gain, evidence they generalize rather than overfit. The winning patch tracks the model's dominant pathology, not its size or family: changing the model can change the pathology and the patch, while the same pathology-to-patch match recurs across two model families. What transfers is the diagnose-and-credit loop, not any specific harness.

The training data for fine-tuning large language models (LLMs) is typically structured as input-output pairs. However, for many tasks, there can be multiple equally valid output variations for the same input. Recent studies have observed that the choice of output variation used in training can affect the model's performance. This raises an important question: how can we generate the most effective output from the many possible response generation strategy options? Rather than relying on the traditional but resource-intensive train-and-evaluate approach, this paper proposes a scalable, approximate method for estimating the quality of a small subset of generated training data derived from the same input. We then evaluate how well this small subset of generated output fits the target model we are trying to train. We present a large-scale benchmark covering diverse reasoning-based datasets to support our study. The central idea is that a good output should closely resemble the output generated by the target LLM. We formalize this 'closeness' as the expected alignment score between a candidate output and the output sampled from the target LLM. We connect this measurement to the perplexity metric used in previous literature and demonstrate that leveraging an alignment-based metric can provide better predictions of model performance. Using this strategy, we can evaluate a small subset of the generated output from each response generation strategy option, then select the most effective strategy. We show that an LLM trained on data generated by the selected strategy could lead to a significant performance gain in many cases.

Self-Distillation is a special type of knowledge distillation where the student model has the same architecture as the teacher model. Despite using the same architecture and the same training data, self-distillation has been empirically observed to improve performance, especially when applied repeatedly. For such a process, there is a fundamental question of interest: How much gain is possible by applying multiple steps of self-distillation? To investigate this relative gain, we propose studying the simple but canonical task of linear regression. Our analysis shows that the excess risk achieved by multi-step self-distillation can significantly improve upon a single step of self-distillation, reducing the excess risk by a factor as large as d, where d is the input dimension. Empirical results on regression tasks from the UCI repository show a reduction in the learnt model's risk (MSE) by up to 47%.

Training models to effectively use test-time compute is crucial for improving the reasoning performance of LLMs. Current methods mostly do so via fine-tuning on search traces or running RL with 0/1 outcome reward, but do these approaches efficiently utilize test-time compute? Would these approaches continue to scale as the budget improves? In this paper, we try to answer these questions. We formalize the problem of optimizing test-time compute as a meta-reinforcement learning (RL) problem, which provides a principled perspective on spending test-time compute. This perspective enables us to view the long output stream from the LLM as consisting of several episodes run at test time and leads us to use a notion of cumulative regret over output tokens as a way to measure the efficacy of test-time compute. Akin to how RL algorithms can best tradeoff exploration and exploitation over training, minimizing cumulative regret would also provide the best balance between exploration and exploitation in the token stream. While we show that state-of-the-art models do not minimize regret, one can do so by maximizing a dense reward bonus in conjunction with the outcome 0/1 reward RL. This bonus is the ''progress'' made by each subsequent block in the output stream, quantified by the change in the likelihood of eventual success. Using these insights, we develop Meta Reinforcement Fine-Tuning, or MRT, a new class of fine-tuning methods for optimizing test-time compute. MRT leads to a 2-3x relative gain in performance and roughly a 1.5x gain in token efficiency for math reasoning compared to outcome-reward RL.

We study long-run progress in artificial intelligence in a quantitative way. Many measures, including traditional ones such as patents and publications, machine learning benchmarks, and a new Aggregate State of the Art in ML (or ASOTA) Index we have constructed from these, show exponential growth at roughly constant rates over long periods. Production of patents and publications doubles every ten years, by contrast with the growth of computing resources driven by Moore's Law, roughly a doubling every two years. We argue that the input of AI researchers is also crucial and its contribution can be objectively estimated. Consequently, we give a simple argument that explains the 5:1 relation between these two rates. We then discuss the application of this argument to different output measures and compare our analyses with predictions based on machine learning scaling laws proposed in existing literature. Our quantitative framework facilitates understanding, predicting, and modulating the development of these important technologies.

This paper presents a computationally efficient variant of gradient boosting for multi-class classification and multi-output regression tasks. Standard gradient boosting uses a 1-vs-all strategy for classifications tasks with more than two classes. This strategy translates in that one tree per class and iteration has to be trained. In this work, we propose the use of multi-output regressors as base models to handle the multi-class problem as a single task. In addition, the proposed modification allows the model to learn multi-output regression problems. An extensive comparison with other multi-ouptut based gradient boosting methods is carried out in terms of generalization and computational efficiency. The proposed method showed the best trade-off between generalization ability and training and predictions speeds.

Current reasoning paradigms for LLMs include chain-of-thought, ReAct, and post-hoc self-critique. These paradigms rely on two assumptions that fail on long-horizon, multi-stage tasks. As a result, errors accumulate silently across reasoning steps, leaving an open question: can a reasoning system effectively detect and recover from its own failures? We present ReFlect, a harness system for LLM reasoning that creates standalone error detection and recovery logic as a deterministic wrapper around the model. Controlled experiments across 6 reasoning domains show that prompt-level self-critique produces formulaic templates that flag no issues in 90 of 100 audited reflection blocks, and the investigated LLMs wrongly accept a wrong answer in at least 76\% of cases. Our ReFlect harness achieves task success rates ranging from 41\% on gpt-4o-mini to 56\% on Claude Sonnet 4.5 across six models spanning small and frontier scale, with per-model gains over Direct CoT ranging from +7 pp on Qwen2.5-72B to +29 pp on Claude Sonnet 4.5, and additionally raises SWE-bench patch-structural quality from 0\% (Direct CoT) to between 82\% (Qwen2.5-72B) and 87\% (GPT-4o). Notably, the harness gain is inversely proportional to the model's Direct CoT task success rate (the fitted slope is -1.69 with r=-0.76): each pp lost in baseline success rate is mechanically recovered by 1.69 pp of harness gain. We spot that adding structured reasoning state and operators yields only 15.0--18.7\% pair-mean on Llama-3.3-70B and Qwen2.5-72B because models at this scale cannot reliably populate the state its operators require. ReFlect is model-agnostic, training-free, and operates entirely at inference time.

Current Reinforcement Fine-tuning (RFT) paradigms for Large Language Models (LLMs) suffer from sample inefficiency due to the redundant exposure of identical queries under uniform data sampling. While previous work has explored curriculum learning via heuristic difficulty metrics, these strategies exhibit limitations by neglecting the intrinsic learning signals generated by the model itself, thus leading to suboptimal training regimes. In this paper, we identify a model-inherent signal termed angle concentration that effectively reflects an LLM's capacity to learn from specific data. We theoretically and empirically demonstrate a correlation between the angular distribution of token hidden state vectors and the resulting gradient, revealing a learning preference for data exhibiting higher angle concentration. Inspired by this finding, we propose GAIN-RL, a Gradient-driven Angle-Informed Navigated RL framework. By leveraging the model's intrinsic angle concentration signal, GAIN-RL dynamically selects training data in each epoch, ensuring consistently impactful gradient updates and thus significantly enhancing overall training efficiency. Empirical evaluations show that GAIN-RL (GRPO) achieves over a 2.5x acceleration in training efficiency across diverse mathematical and coding tasks and varying model scales. Furthermore, GAIN-RL (GRPO)'s efficient sampling yields data-efficient training, achieving better performance with half the original data compared to vanilla GRPO with full training data. Code is realsed at https://github.com/wangqinsi1/GAINRL/tree/main.

This paper introduces Waste Factor (W) and Waste Figure (WF) to assess power efficiency in any multiple-input multiple-output (MIMO) or single-input multiple-output (SIMO) or multiple-input single-output (MISO) cascaded communication system. This paper builds upon the new theory of Waste Factor, which systematically models added wasted power in any cascade for parallel systems such as MISO, SIMO, and MIMO systems, which are prevalent in current wireless networks. Here, we also show the advantage of W compared to conventional metrics for quantifying and analyzing energy efficiency. This work explores the utility of W in assessing energy efficiency in communication channels, within Radio Access Networks (RANs).

Analog IC design relies on human experts to search for parameters that satisfy circuit specifications with their experience and intuitions, which is highly labor intensive, time consuming and suboptimal. Machine learning is a promising tool to automate this process. However, supervised learning is difficult for this task due to the low availability of training data: 1) Circuit simulation is slow, thus generating large-scale dataset is time-consuming; 2) Most circuit designs are propitiatory IPs within individual IC companies, making it expensive to collect large-scale datasets. We propose Learning to Design Circuits (L2DC) to leverage reinforcement learning that learns to efficiently generate new circuits data and to optimize circuits. We fix the schematic, and optimize the parameters of the transistors automatically by training an RL agent with no prior knowledge about optimizing circuits. After iteratively getting observations, generating a new set of transistor parameters, getting a reward, and adjusting the model, L2DC is able to optimize circuits. We evaluate L2DC on two transimpedance amplifiers. Trained for a day, our RL agent can achieve comparable or better performance than human experts trained for a quarter. It first learns to meet hard-constraints (eg. gain, bandwidth), and then learns to optimize good-to-have targets (eg. area, power). Compared with grid search-aided human design, L2DC can achieve 250times higher sample efficiency with comparable performance. Under the same runtime constraint, the performance of L2DC is also better than Bayesian Optimization.

When workers lose jobs to AI-driven restructuring, two very different conversations happen on X (formerly Twitter) at the same time. Tech executives and AI researchers talk about productivity, transformation, and opportunity. Laid-off workers and labour critics talk about job loss, uncertainty, and fear. This paper asks a simple question: which conversation gets more reach? We report three studies using two collection methods and 763 tweets from 20 named public accounts. Study 1 used keyword-based collection (n=392) and found no significant difference between corpora (p=0.891), revealing that keyword search is too noisy for this task. Study 2 used account-based collection (n=96) and found a 3.12x mean amplification advantage for capital discourse over labour discourse (p=0.000003, Cohen's d=0.555). Study 3 combined both methods (n=763) and confirmed the finding at 4.18x mean and 10.77x median amplification ratio (p<0.000001). Critically, after normalising for follower count, the asymmetry persists at 2.69x (p=0.000009, Cohen's d=0.491), demonstrating that the effect is not simply a consequence of capital accounts having larger audiences. The finding is robust across all tested amplification metric weightings. We introduce the Amplification Ratio and Amplification Normalisation Index as simple metrics for measuring platform-level discourse inequality. A cross-platform replication on Reddit (n=647 posts) did not replicate the finding, suggesting the asymmetry may be specific to X's account-based amplification architecture. We discuss the methodological implications for cross-platform discourse analysis.

We measure how much one extra recurrence is worth to a looped (depth-recurrent) language model, in equivalent unique parameters. From an iso-depth sweep of 116 pretraining runs across recurrence counts r in {1, 2, 4, 8} spanning {sim}50times in training compute, we fit a joint scaling law L = E + A,(N_once + r^φ N_rec)^{-α} + B,D^{-β} and recover a new recurrence-equivalence exponent φ= 0.46. Intuitively, φ tells us whether looping a block r times is equivalent in validation loss to r unique blocks of a non-looped model (full equivalence, φ{=}1) or to a single block run repeatedly with no capacity gain (φ{=}0). Our φ= 0.46 sits in between, so each additional recurrence predictably increases validation loss at matched training compute. For example, at r{=}4 a 410M looped model performs on par with a 580M non-looped model, but incurs the training cost of a 1B non-looped one. We demonstrate the utility of φ as a measurement tool on two probes. Truncated backpropagation lowers φ to 0.38, indicating that the loop mechanism is poorly trained under truncation, even though validation loss decreases. Conversely, hyperconnections raise φ to 0.65, a genuine capacity gain. Our method applies to any looped LM and separates true loop improvements from token-budget gains.

We consider the problem of finding an input to a stochastic black box function such that the scalar output of the black box function is as close as possible to a target value in the sense of the expected squared error. While the optimization of stochastic black boxes is classic in (robust) Bayesian optimization, the current approaches based on Gaussian processes predominantly focus either on i) maximization/minimization rather than target value optimization or ii) on the expectation, but not the variance of the output, ignoring output variations due to stochasticity in uncontrollable environmental variables. In this work, we fill this gap and derive acquisition functions for common criteria such as the expected improvement, the probability of improvement, and the lower confidence bound, assuming that aleatoric effects are Gaussian with known variance. Our experiments illustrate that this setting is compatible with certain extensions of Gaussian processes, and show that the thus derived acquisition functions can outperform classical Bayesian optimization even if the latter assumptions are violated. An industrial use case in billet forging is presented.

This article studies the change in the prediction accuracy of a response variable when the number of predictors increases, and all variables follow a multivariate normal distribution. Assuming that the correlations between variables are independently drawn, I show that adding variables leads to globally increasing returns to scale when the mean of the correlation distribution is zero. The speed of learning depends positively on the variance of the correlation distribution. I use simulations to study the more complex case of correlation distributions with a non-zero mean and find a pattern of decreasing returns followed by increasing returns to scale - as long as the variance of correlations is not degenerate, in which case globally decreasing returns emerge. I train a collaborative filtering algorithm using the MovieLens 1M dataset to analyze returns from adding variables in a more realistic setting and find globally increasing returns to scale across 2,000 variables. The results suggest significant scale advantages from additional variables in prediction tasks.

Large language models (LLMs) can act as both problem solvers and solution verifiers, where the latter select high-quality answers from a pool of solver-generated candidates. This raises the question of under what conditions verification pays off in solver-verifier systems. Prior work has conducted only limited studies of the factors influencing verification performance, focusing primarily on self-verification and examining neither the relationship between solver and verifier model families nor the effects of reasoning post-training. To rectify this, we present a systematic study across 37 models spanning multiple families, sizes, and base vs. post-trained variants, evaluated on 9 benchmarks covering logical reasoning, structured puzzles, symbolic computation, mathematics, commonsense, factual recall, and domain knowledge. In order to support our analysis, we introduce and empirically validate verifier gain, a metric that predicts the performance improvements from test-time verifier-based rejection sampling. Our experiments find that 1) verification across model families is more effective than either self-verification or verification within the same family, and more generally that the benefits of verification decrease as the solver and verifier become more similar, 2) reasoning post-training weakens self-improvement abilities but strengthens cross-family improvement, and 3) some tasks are inherently more amenable to improvement through verification, particularly mathematical and logical tasks.

LLM inference is still evaluated mainly as a model or software problem: accuracy, latency, throughput, and hardware utilization. This is incomplete. At deployment scale, the relevant output is a quality-conditioned token produced under joint constraints from effective compute, delivered data-center power, cooling capacity, PUE, and utilization. We argue that the ML community should treat inference as energy-to-token production. We formalize this view with a dimensionally consistent Token Production Function in which token rate is bounded by both compute-per-token and energy-per-token ceilings. Listed API prices vary by over an order of magnitude across providers, but we use price dispersion only as directional motivation, not as causal evidence of marginal cost. The core physical question is instead: under fixed quality and service targets, when does the binding constraint move from theoretical peak compute toward delivered power, cooling, and operational efficiency? Under this framing, system optimizations -- latent KV-cache compression, sparse or heavily compressed attention, quantization, routing, and difficulty-adaptive reasoning -- are not merely local engineering tricks. They are energy-to-token levers because they reduce FLOPs/token, joules/token, memory traffic, or utilization losses under fixed (q^{*},s^{*}). We therefore call for inference papers and benchmarks to report Joules/token, active binding constraint, PUE-adjusted delivered power, and utilization-adjusted token output alongside accuracy and latency.

In natural language processing, a recently popular line of work explores how to best report the experimental results of neural networks. One exemplar publication, titled "Show Your Work: Improved Reporting of Experimental Results," advocates for reporting the expected validation effectiveness of the best-tuned model, with respect to the computational budget. In the present work, we critically examine this paper. As far as statistical generalizability is concerned, we find unspoken pitfalls and caveats with this approach. We analytically show that their estimator is biased and uses error-prone assumptions. We find that the estimator favors negative errors and yields poor bootstrapped confidence intervals. We derive an unbiased alternative and bolster our claims with empirical evidence from statistical simulation. Our codebase is at http://github.com/castorini/meanmax.

Statistical whitening transformations play a fundamental role in many computational systems, and may also play an important role in biological sensory systems. Existing neural circuit models of adaptive whitening operate by modifying synaptic interactions; however, such modifications would seem both too slow and insufficiently reversible. Motivated by the extensive neuroscience literature on gain modulation, we propose an alternative model that adaptively whitens its responses by modulating the gains of individual neurons. Starting from a novel whitening objective, we derive an online algorithm that whitens its outputs by adjusting the marginal variances of an overcomplete set of projections. We map the algorithm onto a recurrent neural network with fixed synaptic weights and gain-modulating interneurons. We demonstrate numerically that sign-constraining the gains improves robustness of the network to ill-conditioned inputs, and a generalization of the circuit achieves a form of local whitening in convolutional populations, such as those found throughout the visual or auditory systems.

Reasoning prefixes shape the future trajectory of LLM problem solving, yet existing process reward models usually evaluate them through local step correctness. We argue that correctness is a useful but indirect proxy for the effect we ultimately care about: whether a prefix increases the probability of successful completion. We define this effect as prefix gain, the solve-rate improvement induced by conditioning lightweight student model group on a prefix, and use it to train a Prefix Utility Model (PUM) with a simple pairwise ranking objective. PUM learns outcome-grounded prefix utility and can score both complete trajectories and partial reasoning prefixes. Across Best-of-N selection, beam search, and reinforcement learning on mathematical reasoning, PUM provides a strong prefix-level supervision signal, especially when candidate pools are large, search budgets increase, or rule-based rewards are sparse. We release all data, models, and code at https://zhiqix.github.io/pum-project-page.

Multi-model LLM systems such as routing, voting, cascades, fusion, and mixture-of-agents are used to beat single-model accuracy. We show that their gain is capped by a quantity the field rarely reports. For any policy whose output is one member model answer, accuracy cannot exceed one minus beta, where beta is the rate at which every model is wrong on the same query. In contrast, the usual diagnostic, average pairwise error correlation rho, cannot identify beta: error laws with identical marginals and pairwise correlations can have different all-wrong rates. A Clopper-Pearson bound on beta gives a finite-sample certificate on the largest gain any router, vote, or cascade could deliver before training a router. Across 67 models from 21 providers, a tetrachoric-calibrated single-factor model still underprices the all-wrong tail: on open-ended mathematics, observed beta is 0.052 versus 0.023 under the full 67-model Gaussian copula, about 2.5 times underpricing, with 90 percent CI 1.7 to 3.4 and k equals 17. The effect recurs on execution-graded code, where beta is 0.079. Re-asking the same GPQA-Diamond questions in free-response rather than multiple-choice form reopens the tail, with beta 0.127 and a five-judge panel with kappa 0.73 to 0.92, locating co-failure in answer format rather than subject. At matched quality, low-rho heterogeneous ensembles beat high-rho Self-MoA, but on checkable tasks in our pool, combining models rarely beats the single best model without a strong query-level routing signal. Gains come from models failing on different questions, not from adding more models.

In the artificial neuron, I replace the dot product with the weighted Lehmer mean, which may emulate different cases of a generalized mean. The single neuron instance is replaced by a multiplet of neurons which have the same averaging weights. A group of outputs feed forward, in lieu of the single scalar. The generalization parameter is typically set to a different value for each neuron in the multiplet. I further extend the concept to a multiplet taken from the Gini mean. Derivatives with respect to the weight parameters and with respect to the two generalization parameters are given. Some properties of the network are investigated, showing the capacity to emulate the classical exclusive-or problem organically in two layers and perform some multiplication and division. The network can instantiate truncated power series and variants, which can be used to approximate different functions, provided that parameters are constrained. Moreover, a mean case slope score is derived that can facilitate a learning-rate novelty based on homogeneity of the selected elements. The multiplet neuron equation provides a way to segment regularization timeframes and approaches.

Recent machine learning papers often report 1-2 percentage point improvements from a single run on a benchmark. These gains are highly sensitive to random seeds, data ordering, and implementation details, yet are rarely accompanied by uncertainty estimates or significance tests. It is therefore unclear when a reported +1-2% reflects a real algorithmic advance versus noise. We revisit this problem under realistic compute budgets, where only a few runs are affordable. We propose a simple, PC-friendly evaluation protocol based on paired multi-seed runs, bias-corrected and accelerated (BCa) bootstrap confidence intervals, and a sign-flip permutation test on per-seed deltas. The protocol is intentionally conservative and is meant as a guardrail against over-claiming. We instantiate it on CIFAR-10, CIFAR-10N, and AG News using synthetic no-improvement, small-gain, and medium-gain scenarios. Single runs and unpaired t-tests often suggest significant gains for 0.6-2.0 point improvements, especially on text. With only three seeds, our paired protocol never declares significance in these settings. We argue that such conservative evaluation is a safer default for small gains under tight budgets.

This paper studies the prediction of a target z from a pair of random variables (x,y), where the ground-truth predictor is additive E[z mid x,y] = f_star(x) +g_{star}(y). We study the performance of empirical risk minimization (ERM) over functions f+g, f in F and g in G, fit on a given training distribution, but evaluated on a test distribution which exhibits covariate shift. We show that, when the class F is "simpler" than G (measured, e.g., in terms of its metric entropy), our predictor is more resilient to heterogenous covariate shifts in which the shift in x is much greater than that in y. These results rely on a novel H\"older style inequality for the Dudley integral which may be of independent interest. Moreover, we corroborate our theoretical findings with experiments demonstrating improved resilience to shifts in "simpler" features across numerous domains.

This is the 1st part of the dissertation for my master degree and compares the power consumption using the default floating point (32bit) and Nvidia mixed precision (16bit and 32bit) while training a classification ML model. A custom PC with specific hardware was built to perform the experiments, and different ML hyper-parameters, such as batch size, neurons, and epochs, were chosen to build Deep Neural Networks (DNN). Additionally, various software was used during the experiments to collect the power consumption data in Watts from the Graphics Processing Unit (GPU), Central Processing Unit (CPU), Random Access Memory (RAM) and manually from a wattmeter connected to the wall. A benchmarking test with default hyper parameter values for the DNN was used as a reference, while the experiments used a combination of different settings. The results were recorded in Excel, and descriptive statistics were chosen to calculate the mean between the groups and compare them using graphs and tables. The outcome was positive when using mixed precision combined with specific hyper-parameters. Compared to the benchmarking, the optimisation for the classification reduced the power consumption between 7 and 11 Watts. Similarly, the carbon footprint is reduced because the calculation uses the same power consumption data. Still, a consideration is required when configuring hyper-parameters because it can negatively affect hardware performance. However, this research required inferential statistics, specifically ANOVA and T-test, to compare the relationship between the means. Furthermore, tests indicated no statistical significance of the relationship between the benchmarking and experiments. However, a more extensive implementation with a cluster of GPUs can increase the sample size significantly, as it is an essential factor and can change the outcome of the statistical analysis.

Current LLM agent benchmarks, which predominantly focus on binary pass/fail tasks such as code generation or search-based question answering, often neglect the value of real-world engineering that is often captured through the iterative optimization of feasible designs. To this end, we introduce Frontier-Eng, a human-verified benchmark for generative optimization -- an iterative propose-execute-evaluate loop in which an agent generates candidate artifacts, receives executable verifier feedback, and revises them under a fixed interaction budget -- spanning 47 tasks across five broad engineering categories. Unlike previous suites, Frontier-Eng tasks are grounded in industrial-grade simulators and verifiers that provide continuous reward signals and enforce hard feasibility constraints under constrained budgets. We evaluate eight frontier language models using representative search frameworks, finding that while Claude 4.6 Opus achieves the most robust performance, the benchmark remains challenging for all models. Our analysis suggests a dual power-law decay in improvement frequency (sim 1/iteration) and magnitude (sim 1/improvement count). We further show that although width improves parallelism and diversity, depth remains crucial for hard-won improvements under a fixed budget. Frontier-Eng establishes a new standard for assessing the capacity of AI agents to integrate domain knowledge with executable feedback to solve complex, open-ended engineering problems.

Sparse linear regression is one of the most basic questions in machine learning and statistics. Here, we are given as input a design matrix X in R^{N times d} and measurements or labels {y} in R^N where {y} = {X} {w}^* + {xi}, and {xi} is the noise in the measurements. Importantly, we have the additional constraint that the unknown signal vector {w}^* is sparse: it has k non-zero entries where k is much smaller than the ambient dimension. Our goal is to output a prediction vector {w} that has small prediction error: 1{N}cdot |{X} {w}^* - {X} {w}|^2_2. Information-theoretically, we know what is best possible in terms of measurements: under most natural noise distributions, we can get prediction error at most epsilon with roughly N = O(k log d/epsilon) samples. Computationally, this currently needs d^{Omega(k)} run-time. Alternately, with N = O(d), we can get polynomial-time. Thus, there is an exponential gap (in the dependence on d) between the two and we do not know if it is possible to get d^{o(k)} run-time and o(d) samples. We give the first generic positive result for worst-case design matrices {X}: For any {X}, we show that if the support of {w}^* is chosen at random, we can get prediction error epsilon with N = poly(k, log d, 1/epsilon) samples and run-time poly(d,N). This run-time holds for any design matrix {X} with condition number up to 2^{poly(d)}. Previously, such results were known for worst-case {w}^*, but only for random design matrices from well-behaved families, matrices that have a very low condition number (poly(log d); e.g., as studied in compressed sensing), or those with special structural properties.

Our motivation is to shed light the performance of the widely popular "R-Learner." Like many other methods for estimating conditional average treatment effects (CATEs), R-Learning can be expressed as a weighted pseudo-outcome regression (POR). Previous comparisons of POR techniques have paid careful attention to the choice of pseudo-outcome transformation. However, we argue that the dominant driver of performance is actually the choice of weights. Specifically, we argue that R-Learning implicitly performs an inverse-variance weighted form of POR. These weights stabilize the regression and allow for convenient simplifications of bias terms.

Knowledge distillation (KD) is a key technique for compressing large language models into smaller ones while preserving performance. Despite the recent traction of KD research, its effectiveness for smaller language models (LMs) and the mechanisms driving knowledge transfer remain underexplored. In this work, we present the first large-scale empirical and statistical analysis of KD across models ranging from 0.5B to 7B parameters on 14 complex reasoning tasks in a zero-shot setting. Our findings reveal that KD can improve the average performance of smaller models by up to 10%, with a peak task specific gain of 22%, while providing only marginal benefits (sim 1.3%) for larger models. Surprisingly, teacher performance has a minimal impact on student outcomes, while teacher task expertise impacts KD effectiveness. A correlation study indicates that smaller LMs benefit more from KD, whereas larger LMs show diminished gains. Additionally, we uncover a misalignment between improvements in student performance and reasoning fidelity, suggesting that while KD enhances accuracy, it does not always maintain the structured decision-making processes of the teacher. Our ablation study further highlights the importance of teacher signals and logit smoothing in influencing students' performance after distillation. Overall, our study offers a comprehensive empirical and statistical assessment of KD, highlighting both its benefits and trade-offs when distilling knowledge from larger to smaller LMs.

Reinforcement learning substantially improves reasoning in large language models, but it also tends to lengthen chain of thought outputs and increase computational cost during both training and inference. Though length control methods have been proposed, it remains unclear what the optimal output length is for balancing efficiency and performance. In this work, we compare several length control methods on two models, Qwen3-1.7B Base and DeepSeek-R1-Distill-Qwen-1.5B. Our results indicate that length penalties may hinder reasoning acquisition, while properly tuned length control can improve efficiency for models with strong prior reasoning. By extending prior work to RL trained policies, we identify two failure modes, 1) long outputs increase dispersion, and 2) short outputs lead to under-thinking.

Transfer learning approaches have shown to significantly improve performance on downstream tasks. However, it is common for prior works to only report where transfer learning was beneficial, ignoring the significant trial-and-error required to find effective settings for transfer. Indeed, not all task combinations lead to performance benefits, and brute-force searching rapidly becomes computationally infeasible. Hence the question arises, can we predict whether transfer between two tasks will be beneficial without actually performing the experiment? In this paper, we leverage explainability techniques to effectively predict whether task pairs will be complementary, through comparison of neural network activation between single-task models. In this way, we can avoid grid-searches over all task and hyperparameter combinations, dramatically reducing the time needed to find effective task pairs. Our results show that, through this approach, it is possible to reduce training time by up to 83.5% at a cost of only 0.034 reduction in positive-class F1 on the TREC-IS 2020-A dataset.

Reinforcement learning for agentic large language models (LLMs) typically relies on a sparse, trajectory-level outcome reward, making it difficult to evaluate the contribution of individual tool-calls within multi-turn interactions. Existing approaches to such process credit assignment either depend on separate external process reward models that introduce additional consumption, or tree-based structural rollout that merely redistributes the outcome signal while constraining trajectory diversity. A promising alternative leverages the per-turn change in the policy's predicted probability of the ground-truth, termed Information Gain (IG), as an intrinsic process signal without an external evaluator. However, prior work on leveraging IG signals within the RL training loop faces three systematic challenges: normalizing across turns that face heterogeneous positional contexts can distort the relative standing of individual turns, accumulating a variable number of terms causes advantage magnitudes to drift with trajectory depth, and a fixed clipping range governs policy updates identically for turns with vastly different IG signals. In this paper, we propose A^2TGPO (Agentic Turn-Group Policy Optimization with Adaptive Turn-level Clipping), which retains IG as the intrinsic signal but re-designs how it is normalized, accumulated, and consumed: (i) turn-group normalization: normalizes IG within each (prompt, turn-index) group so that each turn is compared only against peers at the same interaction depth; (ii) variance-rescaled discounted accumulation: divides cumulative normalized IG by square root of accumulated terms to keep advantage magnitudes comparable across turn positions; and (iii) adaptive turn-level clipping: modulates each turn's clipping range based on its normalized IG, widening the update region for informative turns and narrowing it for uninformative ones.

Language models often show little to no improvement (i.e., "saturation") when trained via vanilla supervised fine-tuning (SFT) on data similar to what they saw in their training set (e.g., MATH). We introduce a new fine-tuning strategy, STAT, to train such a student model by using the metacognition ability of a stronger large language model (LLM) as the teacher. The teacher uses the task dataset to create a list of skills needed for the task, and then labels each data point with its required skills (Didolkar et al., 2024). By monitoring the student's answers, the teacher creates a Missing-Skill-Profile for the student, tracking how often they failed to apply each skill in their responses. We use this idea to build a modified training set in one of two ways. In STAT-Sel, the teacher uses an existing set of training examples but adaptively reweights them according to the Missing-Skill-Profile. In STAT-Syn, the teacher synthesizes additional examples involving missing skills. Across extensive experiments on Llama and Qwen models, our methods yield improvements of up to 7.5% on MATH, whereas SFT provides only limited gains. Furthermore, STAT enhances performance on out-of-distribution benchmarks (e.g., AIME24/25, AMC23, etc.) by an average of 4.6%. Crucially, we find that STAT is complementary to RL via GRPO (Shao et al., 2024): after the model is improved using STAT to address skill gaps, GRPO continues to add further gains. We conclude that skill-targeted adaptive training should broadly improve current training pipelines. Our code is available at: https://github.com/princeton-pli/STAT.

A range of recent optimizers have emerged that approximate the same "matrix-whitening" transformation in various ways. In this work, we systematically deconstruct such optimizers, aiming to disentangle the key components that explain performance. Across tuned hyperparameters across the board, all flavors of matrix-whitening methods reliably outperform elementwise counterparts, such as Adam. Matrix-whitening is often related to spectral descent -- however, experiments reveal that performance gains are *not explained solely by accurate spectral normalization* -- particularly, SOAP displays the largest per-step gain, even though Muon more accurately descends along the steepest spectral descent direction. Instead, we argue that matrix-whitening serves two purposes, and the variance adaptation component of matrix-whitening is the overlooked ingredient explaining this performance gap. Experiments show that variance-adapted versions of optimizers consistently outperform their sign-descent counterparts, including an adaptive version of Muon. We further ablate variance adaptation strategies, finding that while lookahead style approximations are not as effective, low-rank variance estimators can effectively reduce memory costs without a performance loss.

Regardless of the selected asset class and the level of model complexity (Transformer versus LSTM versus Perceptron/RNN), the GMADL loss function produces superior results than standard MSE-type loss functions and has better numerical properties in the context of optimization than MADL. Better results mean the possibility of achieving a higher risk-weighted return based on buy and sell signals built on forecasts generated by a given theoretical model estimated using the GMADL versus MSE or MADL function. In practice, GMADL solves the problem of selecting the most preferable feature in both classification and regression problems, improving the performance of each estimation. What is important is that, through additional parameterization, GMADL also solves the problem of optimizing investment systems on high-frequency data in such a way that they focus on strategy variants that contain fewer transactions so that transaction costs do not reduce the effectiveness of a given strategy to zero. Moreover, the implementation leverages state-of-the-art machine learning tools, including frameworks for hyperparameter tuning, architecture testing, and walk-forward optimization, ensuring robust and scalable solutions for real-world algorithmic trading.

Large Reasoning Models (LRMs) increasingly rely on reasoning traces with complex internal structures. However, existing work lacks a unified answer to three fundamental questions: (1) what defines high-quality reasoning, (2) how to reliably evaluate long, implicitly structured reasoning traces, and (3) how to use such evaluation signals for reasoning optimization. To address these challenges, we provide a unified perspective. (1) We introduce the ME^2 principle to characterize reasoning quality along macro- and micro-level concerning efficiency and effectiveness. (2) Built on this principle, we model reasoning traces as directed acyclic graphs (DAGs) and develop a DAG-based pairwise evaluation method, capturing complex reasoning structures. (3) Based on this method, we construct the TRM-Preference dataset and train a Thinking Reward Model (TRM) to evaluate reasoning quality at scale. Experiments show that thinking rewards serve as an effective optimization signal. At test time, selecting better reasoning leads to better outcomes (up to 19.3\% gain), and during RL training, thinking rewards enhance reasoning and performance (up to 3.9\% gain) across diverse tasks. Code and data are available at https://github.com/Simplified-Reasoning/TRM.

We propose a novel interpretation technique to explain the behavior of structured output models, which learn mappings between an input vector to a set of output variables simultaneously. Because of the complex relationship between the computational path of output variables in structured models, a feature can affect the value of output through other ones. We focus on one of the outputs as the target and try to find the most important features utilized by the structured model to decide on the target in each locality of the input space. In this paper, we assume an arbitrary structured output model is available as a black box and argue how considering the correlations between output variables can improve the explanation performance. The goal is to train a function as an interpreter for the target output variable over the input space. We introduce an energy-based training process for the interpreter function, which effectively considers the structural information incorporated into the model to be explained. The effectiveness of the proposed method is confirmed using a variety of simulated and real data sets.

Several studies have compared the in-distribution (ID) and out-of-distribution (OOD) performance of models in computer vision and NLP. They report a frequent positive correlation and some surprisingly never even observe an inverse correlation indicative of a necessary trade-off. The possibility of inverse patterns is important to determine whether ID performance can serve as a proxy for OOD generalization capabilities. This paper shows with multiple datasets that inverse correlations between ID and OOD performance do happen in real-world data - not only in theoretical worst-case settings. We also explain theoretically how these cases can arise even in a minimal linear setting, and why past studies could miss such cases due to a biased selection of models. Our observations lead to recommendations that contradict those found in much of the current literature. - High OOD performance sometimes requires trading off ID performance. - Focusing on ID performance alone may not lead to optimal OOD performance. It may produce diminishing (eventually negative) returns in OOD performance. - In these cases, studies on OOD generalization that use ID performance for model selection (a common recommended practice) will necessarily miss the best-performing models, making these studies blind to a whole range of phenomena.

Instruction tuning is now the default way to train and adapt large language models, but many instruction--input--output pairs are only weakly specified: for a given input, the same output can remain plausible under several alternative instructions. This raises a simple question: does the instruction uniquely determine the target output? We propose the Task--Specificity Score (TSS) to quantify how much an instruction matters for predicting its output, by contrasting the true instruction against plausible alternatives for the same input. We further introduce TSS++, which uses hard alternatives and a small quality term to mitigate easy-negative effects. Across three instruction datasets (Alpaca, Dolly-15k, NI-20) and three open LLMs (Gemma, Llama, Qwen), we show that selecting task-specific examples improves downstream performance under tight token budgets and complements quality-based filters such as perplexity and IFD.

Several recent Transformer architectures expose later layers to representations computed in the earliest layers, motivated by the observation that low-level features can become harder to recover as the residual stream is repeatedly transformed through depth. The cheapest among these methods add static value residuals: learned mixing coefficients that expose the first-layer value projection V_1 uniformly across tokens and heads. More expressive dense or dynamic alternatives recover finer-grained access, but at higher memory cost and lower throughput. The usefulness of V_1 is unlikely to be constant across tokens, heads, and contexts; different positions plausibly require different amounts of access to early lexical or semantic information. We therefore treat early-representation reuse as a retrieval problem rather than a connectivity problem, and introduce Selective Access Transformer (SATFormer), which preserves the first-layer value pathway while controlling access with a context-dependent gate. Across models from 130M to 1.3B parameters, SATFormer consistently improves validation loss and zero-shot accuracy over the static value-residual and Transformer baselines. Its strongest gains appear on retrieval-intensive benchmarks, where it improves over static value residuals by approximately 1.5 average points, while maintaining throughput and memory usage close to the baseline Transformer. Gate analyses suggest sparse, depth-dependent, head-specific, and category-sensitive access patterns, supporting the interpretation that SATFormer learns selective reuse of early representations rather than uniform residual copying. Our code is available at https://github.com/SkyeGunasekaran/SATFormer.

Transfer learning is an essential technique for many machine learning/AI models of complex structures such as large language models and generative AI. The essence of transfer learning is to leverage knowledge from resolved source tasks for a new target task, especially when the sample size m of the training data for the latter is low. In this work, we rigorously analyze the potential benefit of transfer learning in terms of sample efficiency. Specifically, taking an optimal transport viewpoint of transfer learning, we find that when the data dimension d is higher than 3, the sample complexity for transfer learning is O(m^{-(α+1)/d}), with α indicating the smoothness of the data distribution, as opposed to the O(m^{-p/d}) sample complexity for direct learning with p indicating the smoothness of the optimal target model. Our finding theoretically supports a better sample efficiency for transfer learning, when the target task is optimizing over a family of not-so-smooth models (i.e., highly complex networks with the possible use of non-smooth activation functions). Using image classification as an example, we numerically demonstrate the sample efficiency for transfer learning, that is, in the data hungry regime, the model performance can be significantly improved by transfer learning.

Collecting high-quality training examples for language model fine-tuning is expensive, with practical budgets limiting the amount of data that can be procured. We investigate whether example difficulty affects GRPO training effectiveness by comparing selection strategies (easy, medium, hard, random) across multiple models and reasoning tasks. Training on the hardest 10\% of examples (those where the base model fails most often) yields dramatic performance gains up to 47\%, while easy examples produce minimal improvements of 3-15\%. This occurs because GRPO requires outcome variance to generate learning signals; hard examples maintain mixed success/failure outcomes throughout training while easy examples quickly converge to consistent success, eliminating learning opportunities. Moreover, models trained on hard examples show superior out-of-distribution generalization, with only hard-trained models achieving meaningful gains on the AIME2025 benchmark. Our findings provide clear guidance: when budget-constrained, prioritize collecting and annotating examples where your base model struggles, as these drive nearly all learning value in GRPO fine-tuning

Quality Estimation (QE) is estimating the quality of model output when the ground truth reference is not available. Looking at model uncertainty from its own output probabilities is the most trivial and low-effort way to estimate the output quality. However, for generative model, output probabilities might not be the best quality estimator. At an output step, there can be multiple correct options, making the probability distribution spread out more. Thus, lower token probability does not necessarily mean lower output quality. In other words, the model can be considered underconfident. In this paper, we propose a QE approach called Dominant Mass Probability (DMP}, that boosts the model confidence in cases where there are multiple viable output options. We show that, with no increase in complexity, DMP is notably better than sequence probability when estimating the quality of different models (Whisper, Llama, etc.) on different tasks (translation, summarization, etc.). Compared to sequence probability, DMP achieves on average +0.208 improvement in Pearson correlation to ground-truth quality.

The evolving sophistication and intricacies of Large Language Models (LLMs) yield unprecedented advancements, yet they simultaneously demand considerable computational resources and incur significant costs. To alleviate these challenges, this paper introduces a novel, simple, and effective method named ``\growlength'' to accelerate the pretraining process of LLMs. Our method progressively increases the training length throughout the pretraining phase, thereby mitigating computational costs and enhancing efficiency. For instance, it begins with a sequence length of 128 and progressively extends to 4096. This approach enables models to process a larger number of tokens within limited time frames, potentially boosting their performance. In other words, the efficiency gain is derived from training with shorter sequences optimizing the utilization of resources. Our extensive experiments with various state-of-the-art LLMs have revealed that models trained using our method not only converge more swiftly but also exhibit superior performance metrics compared to those trained with existing methods. Furthermore, our method for LLMs pretraining acceleration does not require any additional engineering efforts, making it a practical solution in the realm of LLMs.

We build new test sets for the CIFAR-10 and ImageNet datasets. Both benchmarks have been the focus of intense research for almost a decade, raising the danger of overfitting to excessively re-used test sets. By closely following the original dataset creation processes, we test to what extent current classification models generalize to new data. We evaluate a broad range of models and find accuracy drops of 3% - 15% on CIFAR-10 and 11% - 14% on ImageNet. However, accuracy gains on the original test sets translate to larger gains on the new test sets. Our results suggest that the accuracy drops are not caused by adaptivity, but by the models' inability to generalize to slightly "harder" images than those found in the original test sets.

We consider the problem of language model inversion: given outputs of a language model, we seek to extract the prompt that generated these outputs. We develop a new black-box method, output2prompt, that learns to extract prompts without access to the model's logits and without adversarial or jailbreaking queries. In contrast to previous work, output2prompt only needs outputs of normal user queries. To improve memory efficiency, output2prompt employs a new sparse encoding techique. We measure the efficacy of output2prompt on a variety of user and system prompts and demonstrate zero-shot transferability across different LLMs.

We derive a simple and model-independent formula for the change in the generalization gap due to a gradient descent update. We then compare the change in the test error for stochastic gradient descent to the change in test error from an equivalent number of gradient descent updates and show explicitly that stochastic gradient descent acts to regularize generalization error by decorrelating nearby updates. These calculations depends on the details of the model only through the mean and covariance of the gradient distribution, which may be readily measured for particular models of interest. We discuss further improvements to these calculations and comment on possible implications for stochastic optimization.

We present an empirical evaluation of various outputs generated by nine of the most widely-available large language models (LLMs). Our analysis is done with off-the-shelf, readily-available tools. We find a correlation between percentage of memorized text, percentage of unique text, and overall output quality, when measured with respect to output pathologies such as counterfactual and logically-flawed statements, and general failures like not staying on topic. Overall, 80.0% of the outputs evaluated contained memorized data, but outputs containing the most memorized content were also more likely to be considered of high quality. We discuss and evaluate mitigation strategies, showing that, in the models evaluated, the rate of memorized text being output is reduced. We conclude with a discussion on potential implications around what it means to learn, to memorize, and to evaluate quality text.

We propose a deep learning methodology for multivariate regression that is based on pattern recognition that triggers fast learning over sensor data. We used a conversion of sensors-to-image which enables us to take advantage of Computer Vision architectures and training processes. In addition to this data preparation methodology, we explore the use of state-of-the-art architectures to generate regression outputs to predict agricultural crop continuous yield information. Finally, we compare with some of the top models reported in MLCAS2021. We found that using a straightforward training process, we were able to accomplish an MAE of 4.394, RMSE of 5.945, and R^2 of 0.861.

Automatic LLM benchmarks, such as AlpacaEval 2.0, Arena-Hard-Auto, and MT-Bench, have become popular for evaluating language models due to their cost-effectiveness and scalability compared to human evaluation. Achieving high win rates on these benchmarks can significantly boost the promotional impact of newly released language models. This promotional benefit may motivate tricks, such as manipulating model output length or style to game win rates, even though several mechanisms have been developed to control length and disentangle style to reduce gameability. Nonetheless, we show that even a "null model" that always outputs a constant response (irrelevant to input instructions) can cheat automatic benchmarks and achieve top-ranked win rates: an 86.5% LC win rate on AlpacaEval 2.0; an 83.0 score on Arena-Hard-Auto; and a 9.55 score on MT-Bench. Moreover, the crafted cheating outputs are transferable because we assume that the instructions of these benchmarks (e.g., 805 samples of AlpacaEval 2.0) are private and cannot be accessed. While our experiments are primarily proof-of-concept, an adversary could use LLMs to generate more imperceptible cheating responses, unethically benefiting from high win rates and promotional impact. Our findings call for the development of anti-cheating mechanisms for reliable automatic benchmarks. The code is available at https://github.com/sail-sg/Cheating-LLM-Benchmarks.

Human-produced emissions are growing at an alarming rate, causing already observable changes in the climate and environment in general. Each year global carbon dioxide emissions hit a new record, and it is reported that 0.5% of total US greenhouse gas emissions are attributed to data centres as of 2021. The release of ChatGPT in late 2022 sparked social interest in Large Language Models (LLMs), the new generation of Language Models with a large number of parameters and trained on massive amounts of data. Currently, numerous companies are releasing products featuring various LLMs, with many more models in development and awaiting release. Deep Learning research is a competitive field, with only models that reach top performance attracting attention and being utilized. Hence, achieving better accuracy and results is often the first priority, while the model's efficiency and the environmental impact of the study are neglected. However, LLMs demand substantial computational resources and are very costly to train, both financially and environmentally. It becomes essential to raise awareness and promote conscious decisions about algorithmic and hardware choices. Providing information on training time, the approximate carbon dioxide emissions and power consumption would assist future studies in making necessary adjustments and determining the compatibility of available computational resources with model requirements. In this study, we infused T5 LLM with external knowledge and fine-tuned the model for Question-Answering task. Furthermore, we calculated and reported the approximate environmental impact for both steps. The findings demonstrate that the smaller models may not always be sustainable options, and increased training does not always imply better performance. The most optimal outcome is achieved by carefully considering both performance and efficiency factors.

We introduce a novel paradigm in compiler optimization powered by Large Language Models with compiler feedback to optimize the code size of LLVM assembly. The model takes unoptimized LLVM IR as input and produces optimized IR, the best optimization passes, and instruction counts of both unoptimized and optimized IRs. Then we compile the input with generated optimization passes and evaluate if the predicted instruction count is correct, generated IR is compilable, and corresponds to compiled code. We provide this feedback back to LLM and give it another chance to optimize code. This approach adds an extra 0.53% improvement over -Oz to the original model. Even though, adding more information with feedback seems intuitive, simple sampling techniques achieve much higher performance given 10 or more samples.

Recent developments in large-scale machine learning suggest that by scaling up data, model size and training time properly, one might observe that improvements in pre-training would transfer favorably to most downstream tasks. In this work, we systematically study this phenomena and establish that, as we increase the upstream accuracy, the performance of downstream tasks saturates. In particular, we investigate more than 4800 experiments on Vision Transformers, MLP-Mixers and ResNets with number of parameters ranging from ten million to ten billion, trained on the largest scale of available image data (JFT, ImageNet21K) and evaluated on more than 20 downstream image recognition tasks. We propose a model for downstream performance that reflects the saturation phenomena and captures the nonlinear relationship in performance of upstream and downstream tasks. Delving deeper to understand the reasons that give rise to these phenomena, we show that the saturation behavior we observe is closely related to the way that representations evolve through the layers of the models. We showcase an even more extreme scenario where performance on upstream and downstream are at odds with each other. That is, to have a better downstream performance, we need to hurt upstream accuracy.

Given an algorithmic predictor that is accurate on some source population consisting of strategic human decision subjects, will it remain accurate if the population respond to it? In our setting, an agent or a user corresponds to a sample (X,Y) drawn from a distribution D and will face a model h and its classification result h(X). Agents can modify X to adapt to h, which will incur a distribution shift on (X,Y). Our formulation is motivated by applications where the deployed machine learning models are subjected to human agents, and will ultimately face responsive and interactive data distributions. We formalize the discussions of the transferability of a model by studying how the performance of the model trained on the available source distribution (data) would translate to the performance on its induced domain. We provide both upper bounds for the performance gap due to the induced domain shift, as well as lower bounds for the trade-offs that a classifier has to suffer on either the source training distribution or the induced target distribution. We provide further instantiated analysis for two popular domain adaptation settings, including covariate shift and target shift.

One of the most profound challenges of modern machine learning is performing well on the long-tail of rare and underrepresented features. Large general-purpose models are trained for many tasks, but work best on high-frequency use cases. After training, it is hard to adapt a model to perform well on specific use cases underrepresented in the training corpus. Relying on prompt engineering or few-shot examples to maximize the output quality on a particular test case can be frustrating, as models can be highly sensitive to small changes, react in unpredicted ways or rely on a fixed system prompt for maintaining performance. In this work, we ask: "Can we optimize our training protocols to both improve controllability and performance on underrepresented use cases at inference time?" We revisit the divide between training and inference techniques to improve long-tail performance while providing users with a set of control levers the model is trained to be responsive to. We create a detailed taxonomy of data characteristics and task provenance to explicitly control generation attributes and implicitly condition generations at inference time. We fine-tune a base model to infer these markers automatically, which makes them optional at inference time. This principled and flexible approach yields pronounced improvements in performance, especially on examples from the long tail of the training distribution. While we observe an average lift of 5.7% win rates in open-ended generation quality with our markers, we see over 9.1% gains in underrepresented domains. We also observe relative lifts of up to 14.1% on underrepresented tasks like CodeRepair and absolute improvements of 35.3% on length instruction following evaluations.

Decoupled weight decay, solely responsible for the performance advantage of AdamW over Adam, has long been set to proportional to learning rate γ without questioning. Some researchers have recently challenged such assumption and argued that decoupled weight decay should be set propto γ^2 instead based on orthogonality arguments at steady state. To the contrary, we find that eliminating the contribution of the perpendicular component of the update to the weight norm leads to little change to the training dynamics. Instead, we derive that decoupled weight decay propto γ^2 results in stable weight norm based on the simple assumption that updates become independent of the weights at steady state, regardless of the nature of the optimizer. Based on the same assumption, we derive and empirically verify that the Total Update Contribution (TUC) of a minibatch under the Scion optimizer is better characterized by the momentum-dependent effective learning rate whose optimal value transfers and we show that decoupled weight decay propto γ^2 leads to stable weight and gradient norms and allows us to better control the training dynamics and improve the model performance.

Recent years have seen considerable progress in the continual training of deep neural networks, predominantly thanks to approaches that add replay or regularization terms to the loss function to approximate the joint loss over all tasks so far. However, we show that even with a perfect approximation to the joint loss, these approaches still suffer from temporary but substantial forgetting when starting to train on a new task. Motivated by this 'stability gap', we propose that continual learning strategies should focus not only on the optimization objective, but also on the way this objective is optimized. While there is some continual learning work that alters the optimization trajectory (e.g., using gradient projection techniques), this line of research is positioned as alternative to improving the optimization objective, while we argue it should be complementary. To evaluate the merits of our proposition, we plan to combine replay-approximated joint objectives with gradient projection-based optimization routines to test whether the addition of the latter provides benefits in terms of (1) alleviating the stability gap, (2) increasing the learning efficiency and (3) improving the final learning outcome.

Retrieval-augmented generation (RAG) grounds large language models with external evidence, but under a limited context budget, the key challenge is deciding which retrieved passages should be injected. We show that retrieval relevance metrics (e.g., NDCG) correlate weakly with end-to-end QA quality and can even become negatively correlated under multi-passage injection, where redundancy and mild conflicts destabilize generation. We propose Information Gain Pruning (IGP), a deployment-friendly reranking-and-pruning module that selects evidence using a generator-aligned utility signal and filters weak or harmful passages before truncation, without changing existing budget interfaces. Across five open-domain QA benchmarks and multiple retrievers and generators, IGP consistently improves the quality--cost trade-off. In a representative multi-evidence setting, IGP delivers about +12--20% relative improvement in average F1 while reducing final-stage input tokens by roughly 76--79% compared to retriever-only baselines.