Daily Papers

The Earth's atmosphere is an aerosol, it contains suspended particles. When air flows over an obstacle such as an aircraft wing or tree branch, these particles may not follow the same paths as the air flowing around the obstacle. Instead the particles in the air may deviate from the path of the air and so collide with the surface of the obstacle. It is known that particle inertia can drive this deposition, and that there is a critical value of this inertia, below which no point particles deposit. Particle inertia is measured by the Stokes number, St. We show that near the critical value of the Stokes number, St_c, the amount of deposition has the unusual scaling law of exp(-1/(St-St_c)^{1/2}). The scaling is controlled by the stagnation point of the flow. This scaling is determined by the time for the particle to reach the surface of the cylinder varying as 1/(St-St_c)^{1/2}, together with the distance away from the stagnation point (perpendicular to the flow direction) increasing exponentially with time. The scaling law applies to inviscid flow, a model for flow at high Reynolds numbers. The unusual scaling means that the amount of particles deposited increases only very slowly above the critical Stokes number. This has consequences for applications ranging from rime formation and fog harvesting to pollination.

A finite difference scheme is used to develop a numerical method to solve the flow of an unbounded viscoelastic fluid with zero to moderate inertia around a prolate spheroidal particle. The equations are written in prolate spheroidal coordinates, and the shape of the particle is exactly resolved as one of the coordinate surfaces representing the inner boundary of the computational domain. As the prolate spheroidal grid is naturally clustered near the particle surface, good resolution is obtained in the regions where the gradients of relevant flow variables are most significant. This coordinate system also allows large domain sizes with a reasonable number of mesh points to simulate unbounded fluid around a particle. Changing the aspect ratio of the inner computational boundary enables simulations of different particle shapes ranging from a sphere to a slender fiber. Numerical studies of the latter particle shape allow testing of slender body theories. The mass and momentum equations are solved with a Schur complement approach allowing us to solve the zero inertia case necessary to isolate the viscoelastic effects. The singularities associated with the coordinate system are overcome using L'Hopital's rule. A straightforward imposition of conditions representing a time-varying combination of linear flows on the outer boundary allows us to study various flows with the same computational domain geometry. {For the special but important case of zero fluid and particle inertia we obtain a novel formulation that satisfies the force- and torque-free constraint in an iteration-free manner.} The numerical method is demonstrated for various flows of Newtonian and viscoelastic fluids around spheres and spheroids (including those with large aspect ratio). Good agreement is demonstrated with existing theoretical and numerical results.

Ensemble Kalman Inversion (EKI) is a derivative-free, ensemble-based method for inverse and optimization problems. Its continuous-time formulation can be interpreted as an interacting particle system driven by a Kalman-type preconditioned descent direction. A well-known limitation of this dynamics is the possible premature collapse of the covariance of the ensemble, which makes the method sensitive to the initial ensemble. We introduce a second-order particle system in which the particles evolve according to an inertial dynamics. The model combines a Kalman-type relaxation force with damping, attraction towards the ensemble mean, and a short-range repulsive interaction designed to counteract ensemble collapse. The resulting dynamics can be interpreted as a heavy-ball reformulation of continuous-time EKI enriched by competing attractive and repulsive mechanisms. For linear inverse problems, we analyze the induced mean and fluctuation dynamics and identify a parameter regime in which fully collapsed configurations are linearly unstable. We further characterize asymptotic equilibria through a constrained optimality condition on the subspace retained by the limiting ensemble covariance and derive an exponential decay estimate. Numerical experiments illustrate the effect of inertia and repulsion on the ensemble dynamics and compare the proposed second-order method with first-order EKI-type

It is well known that the reversibility of Stokes flow makes it difficult for small microorganisms to swim. Inertial effects break this reversibility, allowing new mechanisms of propulsion and feeding. Therefore it is important to understand the effects of unsteady and fluid inertia on the dynamics of microorganisms in flow. In this work, we show how to translate known inertial effects for non-motile organisms to motile ones, from passive to active particles. The method relies on a principle used earlier by Legendre and Magnaudet (1997) to deduce inertial corrections to the lift force on a bubble from the inertial drag on a solid sphere, using the fact that small inertial effects are determined by the far field of the disturbance flow. The method allows for example to compute the inertial effect of unsteady fluid accelerations on motile organisms, and the inertial forces such organisms experience in steady shear flow. We explain why the method fails to describe the effect of convective fluid inertia.

Spontaneous symmetry breaking is examined by regarding it as a phenomenon in the eternal intermediate state due to sequential perturbations. The concept of the relativistic many-body state is applied to this intermediate state occurring in the collision of massless Dirac fermions. Time in the relativistic many-body state should evolve while maintaining the direction of time in each particle, even if the particles are viewed from any inertial frames. This kinematical requirement leads to spontaneous symmetry breaking in the vacuum of these states, which gives a different meaning to the results of the Higgs model. In this vacuum, massless fermion-antifermion pairs and coherent collection of gauge bosons condense, which determine each other's mass. When a local excitation of the condensed gauge bosons propagates in space, a Higgs-like boson appears. The effective coupling of this Higgs-like boson to gauge bosons is calculated as a one-loop process. With this coupling, the total cross section of the pair annihilation of fermion and antifermion to gauge boson pair is calculated. Renormalizability of this model is discussed using the inductive method. Since the Higgs Lagrangian is not assumed, the divergence we must renormalize is only the logarithmic divergence, not the quadratic one.

We study the self-diffusiophoresis of a spherical chemically active particle near a planar, impermeable wall, with a focus on the influence of particle orientation on propulsion. We analyze a Janus particle with asymmetric surface chemical activity, consisting of a small inert region within a catalytically active cap. While numerical simulations have been used to study such particles, they encounter difficulties resolving the flow and transport in the extreme near-wall regime due to geometric confinement and steep solute concentration gradients. We address this limitation through an asymptotic analysis in the near-contact limit, where the gap between the particle and the wall is narrow. In particular, we consider the distinguished limit in which the inert region is asymptotically comparable in size to the lubrication region. We analyze an axisymmetric configuration in which the inert face is oriented parallel to the wall and extend the analysis to slightly tilted orientations. We find that the capsize determines whether a tilted particle rotates back toward the axisymmetric state or continues to reorient, thereby characterizing its rotational stability in the near-contact regime.

Video generators are increasingly evaluated as potential world models, which requires them to encode and understand physical laws. We investigate their representation of a fundamental law: gravity. Out-of-the-box video generators consistently generate objects falling at an effectively slower acceleration. However, these physical tests are often confounded by ambiguous metric scale. We first investigate if observed physical errors are artifacts of these ambiguities (e.g., incorrect frame rate assumptions). We find that even temporal rescaling cannot correct the high-variance gravity artifacts. To rigorously isolate the underlying physical representation from these confounds, we introduce a unit-free, two-object protocol that tests the timing ratio t_1^2/t_2^2 = h_1/h_2, a relationship independent of g, focal length, and scale. This relative test reveals violations of Galileo's equivalence principle. We then demonstrate that this physical gap can be partially mitigated with targeted specialization. A lightweight low-rank adaptor fine-tuned on only 100 single-ball clips raises g_{eff} from 1.81,m/s^2 to 6.43,m/s^2 (reaching 65% of terrestrial gravity). This specialist adaptor also generalizes zero-shot to two-ball drops and inclined planes, offering initial evidence that specific physical laws can be corrected with minimal data.

A number of recent self-supervised learning methods have shown impressive performance on image classification and other tasks. A somewhat bewildering variety of techniques have been used, not always with a clear understanding of the reasons for their benefits, especially when used in combination. Here we treat the embeddings of images as point particles and consider model optimization as a dynamic process on this system of particles. Our dynamic model combines an attractive force for similar images, a locally dispersive force to avoid local collapse, and a global dispersive force to achieve a globally-homogeneous distribution of particles. The dynamic perspective highlights the advantage of using a delayed-parameter image embedding (a la BYOL) together with multiple views of the same image. It also uses a purely-dynamic local dispersive force (Brownian motion) that shows improved performance over other methods and does not require knowledge of other particle coordinates. The method is called MSBReg which stands for (i) a Multiview centroid loss, which applies an attractive force to pull different image view embeddings toward their centroid, (ii) a Singular value loss, which pushes the particle system toward spatially homogeneous density, (iii) a Brownian diffusive loss. We evaluate downstream classification performance of MSBReg on ImageNet as well as transfer learning tasks including fine-grained classification, multi-class object classification, object detection, and instance segmentation. In addition, we also show that applying our regularization term to other methods further improves their performance and stabilize the training by preventing a mode collapse.

Grey-box methods for system identification combine deep learning with physics-informed constraints, capturing complex dependencies while improving out-of-distribution generalization. Yet, despite the growing importance of floating-base systems such as humanoids and quadrupeds, current grey-box models ignore their specific physical constraints. For instance, the inertia matrix is not only positive definite but also exhibits branch-induced sparsity and input independence. Moreover, the 6x6 composite spatial inertia of the floating base inherits properties of single-rigid-body inertia matrices. As we show, this includes the triangle inequality on the eigenvalues of the composite rotational inertia. To address the lack of physical consistency in deep learning models of floating-base systems, we introduce a parameterization of inertia matrices that satisfies all these constraints. Inspired by Deep Lagrangian Networks (DeLaN), we train neural networks to predict physically plausible inertia matrices that minimize inverse dynamics error under Lagrangian mechanics. For evaluation, we collected and released a dataset on multiple quadrupeds and humanoids. In these experiments, our Floating-Base Deep Lagrangian Networks (FeLaN) achieve highly competitive performance on both simulated and real robots, while providing greater physical interpretability.

Inference-Time Scaling (ITS) improves language models by allocating more computation at generation time. Particle Filtering (PF) has emerged as a strong ITS method for complex mathematical reasoning tasks, but it is vulnerable when guided by process reward models, which often assign overconfident scores early in the reasoning process. This causes PF to suffer from premature exploitation: it myopically commits to locally promising trajectories, prunes potentially correct hypotheses, and converges to suboptimal solutions. This failure mode, known as particle impoverishment, is especially severe under constrained computational budgets. To address this, we analyze the problem and identify two root causes: a lack of diversity in the particle set due to overconfident resampling and consequent inability to assess the potential of a reasoning path. We introduce Entropic Particle Filtering (ePF), an algorithm that integrates two new techniques to solve these issues. The first technique, Entropic Annealing (EA), directly mitigates particle impoverishment by monitoring search diversity via entropy; when diversity drops, it intervenes by dynamically annealing the resampling distribution to preserve exploration. The second, an enhancement called Look-ahead Modulation (LaM), adds a predictive guide to evaluate a state's potential based on its successors. On several challenging math benchmarks, ePF significantly outperforms strong baselines and achieves up to a 50 % relative improvement in task reward. Together, these methods improve PF's resilience by balancing the exploration of diverse solution spaces with the exploitation of high-reward regions, ultimately leading to higher-quality solutions.

Wearable motion sensing provides a continuous and scalable window into human behavior and health, making it a natural fit for foundation models, yet its pretraining and scaling principles remain poorly understood. Prior work studies isolated design choices, such as sensor placement or sampling frequency, often under fixed settings and narrow downstream tasks that fail to capture real-world sensing diversity. We introduce Inertia-1, a fully open exploration of wearable motion foundation models. Using massive corpora of accelerometer data from global sources spanning more than 18.2M hours, we build a controlled framework for studying the full lifecycle of wearable motion foundation models, covering data choices such as sensor modality, device placement, sampling rate, window length; model choices such as architectures and model size; and training choices such as pretraining objective and data scale. Extensive evaluations across 15 datasets spanning human activity recognition, freezing-of-gait detection, and disease prediction reveal intriguing findings for building motion foundation models that generalize across tasks and sensing conditions. Collectively, Inertia-1 not only presents state-of-the-art recipes for diverse downstream tasks, but also serves as a comprehensive, practical, and open cookbook for wearable motion representation learning.

How momentum, energy, and magnetic fields are transported in the presence of macroscopic gradients is a fundamental question in plasma physics. Answering this question is especially challenging for weakly collisional, magnetized plasmas, where macroscopic gradients influence the plasma's microphysical structure. In this paper, we introduce thermodynamic forcing, a new method for systematically modeling how macroscopic gradients in magnetized or unmagnetized plasmas shape the distribution functions of constituent particles. In this method, we propose to apply an anomalous force to those particles inducing the anisotropy that would naturally emerge due to macroscopic gradients in weakly collisional plasmas. We implement thermodynamic forcing in particle-in-cell (TF-PIC) simulations using a modified Vay particle pusher and validate it against analytic solutions of the equations of motion. We then carry out a series of simulations of electron-proton plasmas with periodic boundary conditions using TF-PIC. First, we confirm that the properties of two electron-scale kinetic instabilities -- one driven by a temperature gradient and the other by pressure anisotropy -- are consistent with previous results. Then, we demonstrate that in the presence of multiple macroscopic gradients, the saturated state can differ significantly from current expectations. This work enables, for the first time, systematic and self-consistent transport modeling in weakly collisional plasmas, with broad applications in astrophysics, laser-plasma physics, and inertial confinement fusion.

We propose a physics-informed neural particle method (PINN--PM) for the spatially homogeneous Landau equation. The method adopts a Lagrangian interacting-particle formulation and jointly parameterizes the time-dependent score and the characteristic flow map with neural networks. Instead of advancing particles through explicit time stepping, the Landau dynamics is enforced via a continuous-time residual defined along particle trajectories. This design removes time-discretization error and yields a mesh-free solver that can be queried at arbitrary times without sequential integration. We establish a rigorous stability analysis in an L^2_v framework. The deviation between learned and exact characteristics is controlled by three interpretable sources: (i) score approximation error, (ii) empirical particle approximation error, and (iii) the physics residual of the neural flow. This trajectory estimate propagates to density reconstruction, where we derive an L^2_v error bound for kernel density estimators combining classical bias--variance terms with a trajectory-induced contribution. Using Hyvarinen's identity, we further relate the oracle score-matching gap to the L^2_v score error and show that the empirical loss concentrates at the Monte Carlo rate, yielding computable a posteriori accuracy certificates. Numerical experiments on analytical benchmarks, including the two- and three-dimensional BKW solutions, as well as reference-free configurations, demonstrate stable transport, preservation of macroscopic invariants, and competitive or improved accuracy compared with time-stepping score-based particle and blob methods while using significantly fewer particles.

Lagrangian turbulence lies at the core of numerous applied and fundamental problems related to the physics of dispersion and mixing in engineering, bio-fluids, atmosphere, oceans, and astrophysics. Despite exceptional theoretical, numerical, and experimental efforts conducted over the past thirty years, no existing models are capable of faithfully reproducing statistical and topological properties exhibited by particle trajectories in turbulence. We propose a machine learning approach, based on a state-of-the-art diffusion model, to generate single-particle trajectories in three-dimensional turbulence at high Reynolds numbers, thereby bypassing the need for direct numerical simulations or experiments to obtain reliable Lagrangian data. Our model demonstrates the ability to reproduce most statistical benchmarks across time scales, including the fat-tail distribution for velocity increments, the anomalous power law, and the increased intermittency around the dissipative scale. Slight deviations are observed below the dissipative scale, particularly in the acceleration and flatness statistics. Surprisingly, the model exhibits strong generalizability for extreme events, producing events of higher intensity and rarity that still match the realistic statistics. This paves the way for producing synthetic high-quality datasets for pre-training various downstream applications of Lagrangian turbulence.

Data-driven learning approaches for physics simulation, sometimes referred to as world models, have emerged as promising alternatives to traditional physics simulators due to their differentiable nature. Prior work has demonstrated impressive results in predicting the motions of rigid and non-rigid objects in complex scenes involving multiple interacting bodies. However, these models are typically trained in simulated environments because obtaining perfect state information such as complete scene point clouds and point correspondences over time is challenging in real-world settings. This reliance on synthetic data can limit their applicability when the sim-to-real gap is large. In this work, we aim to overcome these limitations by introducing a novel framework for training neural object dynamics models directly from unlabeled real-world videos. Specifically, we propose to learn a particle-based dynamics model compatible with a Gaussian splatting framework, which operates on dense particles derived from Gaussians (i.e., particles with scales and rotations) and predicts their position and rotation changes over time. The model is trained via rendering supervision, enabling learning from real-world videos without requiring particle-level labeled states. Our model operates directly on dense Gaussians without relying on heuristic subsampling anchor points. To enable this study, we also present a real-world dataset consisting of about 500 videos capturing diverse object interactions.

Large language models have revolutionized artificial intelligence by enabling large, generalizable models trained through self-supervision. This paradigm has inspired the development of scientific foundation models (FMs). However, applying this capability to experimental particle physics is challenging due to the sparse, spatially distributed nature of detector data, which differs dramatically from natural language. This work addresses if an FM for particle physics can scale and generalize across diverse tasks. We introduce a new dataset with more than 11 million particle collision events and a suite of downstream tasks and labeled data for evaluation. We propose a novel self-supervised training method for detector data and demonstrate its neural scalability with models that feature up to 188 million parameters. With frozen weights and task-specific adapters, this FM consistently outperforms baseline models across all downstream tasks. The performance also exhibits robust data-efficient adaptation. Further analysis reveals that the representations extracted by the FM are task-agnostic but can be specialized via a single linear mapping for different downstream tasks.

Relativistic magnetic turbulence has been proposed as a process for producing nonthermal particles in high-energy astrophysics. Particle energization may be contributed by both magnetic reconnection and turbulent fluctuations, but their interplay is poorly understood. It has been suggested that during magnetic reconnection the parallel electric field dominates particle acceleration up to the lower bound of the power-law particle spectrum, but recent studies show that electric fields perpendicular to magnetic field can play an important, if not dominant role. In this study, we carry out 2D fully kinetic particle-in-cell simulations of magnetically dominated decaying turbulence in a relativistic pair plasma. For a fixed magnetization parameter sigma_0=20, we find that the injection energy {varepsilon}_{rm inj} converges with increasing domain size to {varepsilon}_{rm inj}simeq 10m_ec^2. In contrast, the power-law index, the cut-off energy, and the power-law extent increase steadily with domain size. We trace a large number of particles and evaluate the contributions of the work done by the parallel (W_parallel) and perpendicular (W_perp) electric fields during both the injection phase and the post-injection phase. We find that during the injection phase, the W_perp contribution increases with domain size, suggesting that it may eventually dominate injection for a sufficiently large domain. In contrast, both components contribute equally during the post-injection phase, insensitive to the domain size. For high energy ({varepsilon}varepsilon_{rm inj}) particles, W_perp dominates the subsequent energization. These findings may improve our understanding of nonthermal particles and their emissions in astrophysical plasmas.

The aim of the present work is to investigate the influence of the realistic model parameters on the equipartition of energy in a vibrofluidized system. To achieve this, a three-dimensional vertically vibrated granular system consisting of spherical particles is simulated using the discrete element method (DEM) using the open-source software LAMMPS. Interparticle and wall-particle interactions are determined using the linear-spring dashpot model. Simulations are performed for nearly perfectly smooth to nearly perfectly rough particles. Two different values for the ratio of the tangential to normal spring stiffness coefficient kappa (2/7 and 3/4) are chosen. Non-equipartition of energy between the translational and rotational modes is observed for all realistic values in the parametric range.

Turbulent magnetic fields are to some extent a universal feature in astrophysical phenomena. Charged particles that encounter these turbulence get on average accelerated according to the so-called second-order Fermi process. However, in most astrophysical environments there are additional competing processes, such as different kinds of first-order energy changes and particle escape, that effect the resulting momentum distribution of the particles. In this work we provide to our knowledge the first semi-analytical solution of the isotropic steady-state momentum diffusion equation including continuous and catastrophic momentum changes that can be applied to any arbitrary astrophysical system of interest. Here, we adopt that the assigned magnetic turbulence is constrained on a finite range and the particle flux vanishes beyond these boundaries. Consequently, we show that the so-called pile-up bump -- that has for some special cases long been established -- is a universal feature of stochastic acceleration that emerges around the momentum chi_{rm eq} where acceleration and continuous loss are in equilibrium if the particle's residence time in the system is sufficient at chi_{rm eq}. In general, the impact of continuous and catastrophic momentum changes plays a crucial role in the shape of the steady-state momentum distribution of the accelerated particles, where simplified unbroken power-law approximations are often not adequate.

We present MovingParts, a NeRF-based method for dynamic scene reconstruction and part discovery. We consider motion as an important cue for identifying parts, that all particles on the same part share the common motion pattern. From the perspective of fluid simulation, existing deformation-based methods for dynamic NeRF can be seen as parameterizing the scene motion under the Eulerian view, i.e., focusing on specific locations in space through which the fluid flows as time passes. However, it is intractable to extract the motion of constituting objects or parts using the Eulerian view representation. In this work, we introduce the dual Lagrangian view and enforce representations under the Eulerian/Lagrangian views to be cycle-consistent. Under the Lagrangian view, we parameterize the scene motion by tracking the trajectory of particles on objects. The Lagrangian view makes it convenient to discover parts by factorizing the scene motion as a composition of part-level rigid motions. Experimentally, our method can achieve fast and high-quality dynamic scene reconstruction from even a single moving camera, and the induced part-based representation allows direct applications of part tracking, animation, 3D scene editing, etc.

In this work, we investigate hot, isentropic compact stars in the limiting cases of static and maximally rotating configurations, focusing on how variations in the symmetry energy of the equation of state derived from covariant density functional theory affect stellar properties. We consider both nucleonic and hyperonic matter with systematically varied symmetry energy slopes, fixed entropies per baryon s / k_B=1 and 3, and electron fractions Y_e=0.1 and Y_e=0.4, representative of conditions in binary neutron star mergers and proto-neutron stars. We compute and analyze mass--radius and moment--of--inertia--mass relations, as well as the dependence of the Keplerian (mass-shedding) frequency on mass, angular momentum, and the ratio of kinetic to gravitational energy. Furthermore, we show that several universal relations between global properties remain valid across both nucleonic and hyperonic equations of state with varying symmetry energy, both in the static and Keplerian limit, and for various combinations of the fixed entropy and electron fraction.

Recent video diffusion models can synthesize visually compelling clips, yet often violate basic physical laws-objects float, accelerations drift, and collisions behave inconsistently-revealing a persistent gap between visual realism and physical realism. We propose NewtonRewards, the first physics-grounded post-training framework for video generation based on verifiable rewards. Instead of relying on human or VLM feedback, NewtonRewards extracts measurable proxies from generated videos using frozen utility models: optical flow serves as a proxy for velocity, while high-level appearance features serve as a proxy for mass. These proxies enable explicit enforcement of Newtonian structure through two complementary rewards: a Newtonian kinematic constraint enforcing constant-acceleration dynamics, and a mass conservation reward preventing trivial, degenerate solutions. We evaluate NewtonRewards on five Newtonian Motion Primitives (free fall, horizontal/parabolic throw, and ramp sliding down/up) using our newly constructed large-scale benchmark, NewtonBench-60K. Across all primitives in visual and physics metrics, NewtonRewards consistently improves physical plausibility, motion smoothness, and temporal coherence over prior post-training methods. It further maintains strong performance under out-of-distribution shifts in height, speed, and friction. Our results show that physics-grounded verifiable rewards offer a scalable path toward physics-aware video generation.

Human motion capture from monocular videos has made significant progress in recent years. However, modern approaches often produce temporal artifacts, e.g. in form of jittery motion and struggle to achieve smooth and physically plausible motions. Explicitly integrating physics, in form of internal forces and exterior torques, helps alleviating these artifacts. Current state-of-the-art approaches make use of an automatic PD controller to predict torques and reaction forces in order to re-simulate the input kinematics, i.e. the joint angles of a predefined skeleton. However, due to imperfect physical models, these methods often require simplifying assumptions and extensive preprocessing of the input kinematics to achieve good performance. To this end, we propose a novel method to selectively incorporate the physics models with the kinematics observations in an online setting, inspired by a neural Kalman-filtering approach. We develop a control loop as a meta-PD controller to predict internal joint torques and external reaction forces, followed by a physics-based motion simulation. A recurrent neural network is introduced to realize a Kalman filter that attentively balances the kinematics input and simulated motion, resulting in an optimal-state dynamics prediction. We show that this filtering step is crucial to provide an online supervision that helps balancing the shortcoming of the respective input motions, thus being important for not only capturing accurate global motion trajectories but also producing physically plausible human poses. The proposed approach excels in the physics-based human pose estimation task and demonstrates the physical plausibility of the predictive dynamics, compared to state of the art. The code is available on https://github.com/cuongle1206/OSDCap

Realistic simulation is critical for applications ranging from robotics to animation. Traditional analytic simulators sometimes struggle to capture sufficiently realistic simulation which can lead to problems including the well known "sim-to-real" gap in robotics. Learned simulators have emerged as an alternative for better capturing real-world physical dynamics, but require access to privileged ground truth physics information such as precise object geometry or particle tracks. Here we propose a method for learning simulators directly from observations. Visual Particle Dynamics (VPD) jointly learns a latent particle-based representation of 3D scenes, a neural simulator of the latent particle dynamics, and a renderer that can produce images of the scene from arbitrary views. VPD learns end to end from posed RGB-D videos and does not require access to privileged information. Unlike existing 2D video prediction models, we show that VPD's 3D structure enables scene editing and long-term predictions. These results pave the way for downstream applications ranging from video editing to robotic planning.

Context. Low-mass bodies, such as comets, asteroids, planetesimals, and free-floating planets, are continuously injected into the intra-cluster environment after expulsion from their host planetary systems. These can be modeled as massless particles (MLPs, hereafter). The dynamics of large populations of MLPs, however, has yet received little attention in literature. Aims. We investigate the dynamical evolution of MLP populations in star clusters, and characterize their kinematics and ejection rates. Methods. We present NBODY6++GPU-MASSLESS, a modified version of the N-body simulation code NBODY6++GPU, that allows fast integration of star clusters that contain large numbers of massless particles (MLPs). NBODY6++GPU-MASSLESS contains routines specifically directed at the dynamical evolution of low-mass bodies, such as planets. Results. Unlike stars, MLPs do not participate in the mass segregation process. Instead, MLPs mostly follow the gravitational potential of the star cluster, which gradually decreases over time due to stellar ejections and stellar evolution. The dynamical evolution of MLPs is primarily affected by the evolution of the core of the star cluster. This is most apparent in the outer regions for clusters with higher initial densities. High escape rates of MLPs are observed before the core-collapse, after which escape rates remain stable. Denser star clusters undergo a more intense core collapse, but this does not impact the dynamical evolution of MLPs. The speeds of escaping stars are similar to those of escaping MLPs, when disregarding the high-velocity ejections of neutron stars during the first 50 Myr.

Modeling the dynamics of deformable objects is challenging due to their diverse physical properties and the difficulty of estimating states from limited visual information. We address these challenges with a neural dynamics framework that combines object particles and spatial grids in a hybrid representation. Our particle-grid model captures global shape and motion information while predicting dense particle movements, enabling the modeling of objects with varied shapes and materials. Particles represent object shapes, while the spatial grid discretizes the 3D space to ensure spatial continuity and enhance learning efficiency. Coupled with Gaussian Splattings for visual rendering, our framework achieves a fully learning-based digital twin of deformable objects and generates 3D action-conditioned videos. Through experiments, we demonstrate that our model learns the dynamics of diverse objects -- such as ropes, cloths, stuffed animals, and paper bags -- from sparse-view RGB-D recordings of robot-object interactions, while also generalizing at the category level to unseen instances. Our approach outperforms state-of-the-art learning-based and physics-based simulators, particularly in scenarios with limited camera views. Furthermore, we showcase the utility of our learned models in model-based planning, enabling goal-conditioned object manipulation across a range of tasks. The project page is available at https://kywind.github.io/pgnd .

We study the response of mono-energetic stellar populations with initially isotropic kinematics to impulsive and adiabatic changes to an underlying dark matter potential. Half-light radii expand and velocity dispersions decrease as enclosed dark matter is removed. The details of this expansion and cooling depend on the time scale on which the underlying potential changes. In the adiabatic regime, the product of half-light radius and average velocity dispersion is conserved. We show that the stellar populations maintain centrally isotropic kinematics throughout their adiabatic evolution, and their densities can be approximated by a family of analytical radial profiles. Metallicity gradients within the galaxy flatten as dark matter is slowly removed. In the case of strong impulsive perturbations, stellar populations develop power-law-like density tails with radially biased kinematics. We show that the distribution of stellar binding energies within the dark matter halo substantially widens after an impulsive perturbation, no matter the sign of the perturbation. This allows initially energetically separated stellar populations to mix, to the extent that previously chemo-dynamically distinct populations may masquerade as a single population with large metallicity and energy spread. Finally, we show that in response to an impulsive perturbation, stellar populations that are deeply embedded in cored dark matter halos undergo a series of damped oscillations before reaching a virialised equilibrium state, driven by inefficient phase mixing in the harmonic potentials of cored halos. This slow return to equilibrium adds substantial systematic uncertainty to dynamical masses estimated from Jeans modeling or the virial theorem.

High-fidelity simulations and complex inverse problems, such as detector modeling and unfolding, are computationally intensive bottlenecks across subatomic physics, yet essential for accurate physical interpretation. While Conditional Flow Matching (CFM) offers a robust acceleration approach, we demonstrate its standard training loss is fundamentally misleading. Specifically, utilizing a Jefferson Lab Nuclear Physics (NP) kinematic dataset (γp to ρ^0 p to π^+π^- p), we expose that CFM loss plateaus prematurely, obscuring ongoing physical refinement. To verify this disconnect is a dataset-agnostic pathology, we introduce ScatterPrism, an efficient generative surrogate evaluated against both the NP data and synthetic stress tests modeling challenging 1D distribution topologies. Coupling these benchmarks, we establish that physics-informed metrics continue improving long after standard loss converges. Consequently, we propose a multi-metric diagnostic protocol to ensure true kinematic fidelity without data memorization. Driven by NP challenges relevant to the forthcoming Electron-Ion Collider (EIC), this unified machinery has strong potential to extend to High-Energy Physics (HEP) applications, such as jet modeling. Furthermore, the framework holds promise for broader domains requiring rigorous generative reliability, including medical imaging, astrophysics, and quantitative finance.

Future collider experiments require unprecedented precision in measurements of Higgs, electroweak, and flavour observables, placing stringent demands on event reconstruction. The achievable precision on Higgs couplings scales directly with the resolution on visible final state particles and their invariant masses. Current particle flow algorithms rely on detector specific clustering, limiting flexibility during detector design. Here we present an end-to-end global event reconstruction approach that maps charged particle tracks and calorimeter and muon hits directly to particle level objects. The method combines geometric algebra transformer networks with object condensation based clustering, followed by dedicated networks for particle identification and energy regression. Our approach is benchmarked on fully simulated electron positron collisions at FCC-ee using the CLD detector concept. It outperforms the state-of-the-art rule-based algorithm by 10--20\% in relative reconstruction efficiency, achieves up to two orders of magnitude reduction in fake-particle rates for charged hadrons, and improves visible energy and invariant mass resolution by 22\%. By decoupling reconstruction performance from detector-specific tuning, this framework enables rapid iteration during the detector design phase of future collider experiments.

Initial value problems -- a system of ordinary differential equations and corresponding initial conditions -- can be used to describe many physical phenomena including those arise in classical mechanics. We have developed a novel approach to solve physics-based initial value problems using unsupervised machine learning. We propose a deep learning framework that models the dynamics of a variety of mechanical systems through neural networks. Our framework is flexible, allowing us to solve non-linear, coupled, and chaotic dynamical systems. We demonstrate the effectiveness of our approach on systems including a free particle, a particle in a gravitational field, a classical pendulum, and the H\'enon--Heiles system (a pair of coupled harmonic oscillators with a non-linear perturbation, used in celestial mechanics). Our results show that deep neural networks can successfully approximate solutions to these problems, producing trajectories which conserve physical properties such as energy and those with stationary action. We note that probabilistic activation functions, as defined in this paper, are required to learn any solutions of initial value problems in their strictest sense, and we introduce coupled neural networks to learn solutions of coupled systems.

We present Orbit-Space Geometric Probability Paths (OGPP), a particle-native flow-matching framework for generative modeling of particle systems. OGPP is motivated by two insights: (i) particles are defined up to permutation symmetries, so anonymous indexing inflates per-index target variance and yields curved, hard-to-learn flows; and (ii) particles live in physical space, so the flow terminal velocity has physical meaning and can encode geometric attributes, e.g., surface normals. OGPP instantiates three key components: (1) orbit-space canonicalization of the probability-path terminal endpoint, (2) particle index embeddings for role specialization, and (3) geometric probability paths with arc-length-aware terminal velocities that generate normals as a byproduct of the flow. We evaluate OGPP on minimal-surface benchmarks, where it reduces metric error by up to two orders of magnitude in a single inference step; on ShapeNet, where it matches the state of the art with 5x fewer steps and reaches airplane EMD comparable to DiT-3D with 26x fewer parameters and 5x fewer steps; and on single-shape encoding, where it produces normals and reconstructions competitive with 6D generators while operating entirely in 3D.

Mimicking realistic dynamics in 3D garment animations is a challenging task due to the complex nature of multi-layered garments and the variety of outer forces involved. Existing approaches mostly focus on single-layered garments driven by only human bodies and struggle to handle general scenarios. In this paper, we propose a novel data-driven method, called LayersNet, to model garment-level animations as particle-wise interactions in a micro physics system. We improve simulation efficiency by representing garments as patch-level particles in a two-level structural hierarchy. Moreover, we introduce a novel Rotation Equivalent Transformation that leverages the rotation invariance and additivity of physics systems to better model outer forces. To verify the effectiveness of our approach and bridge the gap between experimental environments and real-world scenarios, we introduce a new challenging dataset, D-LAYERS, containing 700K frames of dynamics of 4,900 different combinations of multi-layered garments driven by both human bodies and randomly sampled wind. Our experiments show that LayersNet achieves superior performance both quantitatively and qualitatively. We will make the dataset and code publicly available at https://mmlab-ntu.github.io/project/layersnet/index.html .

Inference-Time Scaling (ITS) has largely succeeded in verifiable domains like math and coding, where cheap verification enables scalable output selection. However, extending ITS to tasks prone to systematic failure - driven by faulty initial assumptions or unmet multidimensional constraints - typically relies on costly external solvers or brittle, model-based verifiers. Our key insight is that the intrinsic statistics of parallel sample sets, specifically length-adjusted tail entropy, provide a robust discriminative signal for solution quality without access to ground truth. Crucially, these statistics serve as a difficulty gate for adaptive compute allocation, dynamically routing problems across scaling regimes. First, Intrinsic Selection (iS) ranks candidates post-hoc, matching consensus-based algorithms across three domains and improving engineering design selection by 20% over pass@1 baselines. Second, Intrinsic Particle Filtering (iPF) generalizes this to step-level resampling, guiding generation toward high-confidence reasoning trajectories to improve pass@1 by 6.1 points on average on hard math problems. Finally, Particle Distillation (dPF) injects privileged guidance via early logit blending and KL-guided resampling, steering generation past systematic reasoning errors to satisfy expert rubrics, yielding up to 26.5% gains on complex clinical responses. Our pipeline applies seamlessly across broad-purpose, domain-specialized, and multimodal architectures, successfully extending ITS to open-ended domains without requiring trained reward models or exact ground-truth verification.

The field of plasma physics heavily relies on simulations to model various phenomena, such as instabilities, turbulence, and nonlinear behaviors that would otherwise be difficult to study from a purely theoretical approach. Simulations are fundamental in accurately setting up experiments, which can be extremely costly and complex. As high-fidelity tools, gyrokinetic simulations play a crucial role in discovering new physics, interpreting experimental results, and improving the design of next-generation devices. However, their high computational costs necessitate the use of acceleration platforms to reduce execution time. This work revolves around the TRIangular MEsh based Gyrokinetic (TRIMEG) code, which performs high-accuracy particle-in-cell plasma simulations in tokamak geometries, leveraging a novel finite element approach. The rise of graphical processing units (GPUs) constitutes an occasion to satisfy such computational needs, by offloading the most expensive portion of the code to the accelerators. The chosen approach features GPU offloading with the OpenMP API, which grants portability of the code to different architectures, namely AMD and NVIDIA. The particle pushing as well as the grid-to-particle operations have been ported to GPU platforms. Compiler limitations had to be overcome, and portions of the code were restructured to be suitable for GPU acceleration. Kernel performance was evaluated by carrying out GPU grid size exploration, as well as scalability studies. In addition, the efficiency of hybrid MPI-OpenMP offloading parallelization was assessed. The speedup of the GPU implementation was calculated by comparing it with the pure CPU version using different rationales. The Ion Temperature Gradient (ITG) mode was simulated using the GPU-accelerated version, and its correctness was verified in terms of the energy growth rate and the two-dimensional mode structures.

We investigate the time evolution of the Boltzmann entropy of a dilute gas of N particles, N>>1, as it undergoes a free expansion doubling its volume. The microstate of the system, a point in the 4N dimensional phase space, changes in time via Hamiltonian dynamics. Its entropy, at any time t, is given by the logarithm of the phase space volume of all the microstates giving rise to its macrostate at time t. The macrostates that we consider are defined by coarse graining the one-particle phase space into cells Δ_α. The initial and final macrostates of the system are equilibrium states in volumes V and 2V, with the same energy E and particle number N. Their entropy per particle is given, for sufficiently large systems, by the thermodynamic entropy as a function of the particle and energy density, whose leading term is independent of the size of the Δ_α. The intermediate (non-equilibrium) entropy does however depend on the size of the cells Δ_α. Its change with time is due to (i) dispersal in physical space from free motion and to (ii) the collisions between particles which change their velocities. The former depends strongly on the size of the velocity coarse graining Δv: it produces entropy at a rate proportional to Δv. This dependence is investigated numerically and analytically for a dilute two-dimensional gas of hard discs. It becomes significant when the mean free path between collisions is of the same order or larger than the length scale of the initial spatial inhomogeneity. In the opposite limit, the rate of entropy production is essentially independent of Δv and is given by the Boltzmann equation for the limit Δvrightarrow 0. We show that when both processes are active the time dependence of the entropy has a scaling form involving the ratio of the rates of its production by the two processes.

We present 3D DEM simulations of bidisperse granular packings to investigate their jamming densities, phi_J, and dimensionless bulk moduli, K, as a function of the size ratio, delta, and the concentration of small particles, X_{mathrm S}. We determine the partial and total bulk moduli for each packing and report the jamming transition diagram, i.e., the density or volume fraction marking both the first and second transitions of the system. At a large enough size difference, e.g., delta le 0.22, X^{*}_{mathrm S} divides the diagram with most small particles either non-jammed or jammed jointly with large ones. We find that the bulk modulus K jumps at X^{*}_{mathrm S}(delta = 0.15) approx 0.21, at the maximum jamming density, where both particle species mix most efficiently, while for X_{mathrm S} < X^{*}_{mathrm S} K is decoupled in two scenarios as a result of the first and second jamming transition. Along the second transition, K rises relative to the values found at the first transition, however, is still small compared to K at X^{*}_{mathrm S}. While the first transition is sharp, the second is smooth, carried by small-large interactions, while the small-small contacts display a transition. This demonstrates that for low enough delta and X_{mathrm S}, the jamming of small particles indeed impacts the internal resistance of the system. Our new results will allow tuning the bulk modulus K or other properties, such as the wave speed, by choosing specific sizes and concentrations based on a better understanding of whether small particles contribute to the jammed structure or not, and how the micromechanical structure behaves at either transition.

In geometrically frustrated assemblies local inter-subunit misfits propagate to intra-assembly strain gradients, giving rise to anomalous self-limiting assembly thermodynamics. Here, we use theory and coarse-grained simulation to study a recently developed class of ``curvamer'' particles, flexible shell-like particles that exhibit self-limiting assembly due to the build up of curvature deformation in cohesive stacks. To address a generic, yet poorly understood aspect of frustrated assembly, we introduce a model of curvamer assembly that incorporates both {\it intra-particle} shape deformation as well as compliance of {\it inter-particle} cohesive gaps, an effect we can attribute to a {\it finite range of attraction} between particles. We show that the ratio of intra-particle (bending elasticity) to inter-particle stiffness not only controls the regimes of self-limitation but also the nature of frustration propagation through curvamer stacks. We find a transition from uniformly-bound, curvature-focusing stacks at small size to gap-opened, uniformly curved stacks at large size is controlled by a dimensionless measure of inter- versus intra-curvamer stiffness. The finite range of inter-particle attraction determines range of cohesion in stacks are self-limiting, a prediction which is in strong agreement with numerical studies of our coarse-grained colloidal model. These predictions provide critical guidance for experimental realizations of frustrated particle systems designed to exhibit self-limitation at especially large multi-particle scales.

Understanding the physical properties of star-forming cores as mass reservoirs for protostars, and the impact of turbulence, is crucial in star formation studies. We implemented passive tracer particles in clump-scale numerical simulations with turbulence strengths of M_{rm rms} = 2, 10. Unlike core identification methods used in observational studies, we identified 260 star-forming cores using a new method based on tracer particles falling onto protostars. Our findings reveal that star-forming cores do not necessarily coincide with high-density regions when nearby stars are present, as gas selectively accretes onto protostars, leading to clumpy, fragmented structures. We calculated convex hull cores from star-forming cores and defined their filling factors. Regardless of turbulence strength, convex hull cores with lower filling factors tend to contain more protostars and have larger masses and sizes, indicating that cores in clustered regions are more massive and larger than those in isolated regions. Thus, the filling factor serves as a key indicator for distinguishing between isolated and clustered star-forming regions and may provide insights into the star formation processes within clustered regions. We also found that most convex hull cores are gravitationally bound. However, in the M_{rm rms} = 10 model, there are more low-mass, unbound convex hull cores compared to the M_{rm rms} = 2 model. In the M_{rm rms} = 10 model, 16% of the convex hull cores are unbound, which may be explained by the inertial-inflow model. These findings highlight the influence of turbulence strength on the mass and gravitational stability of cores.

This study introduces amangkurat, an open-source Python library designed for the robust numerical simulation of relativistic scalar field dynamics governed by the nonlinear Klein-Gordon equation in (1+1)D spacetime. The software implements a hybrid computational strategy that couples Fourier pseudo-spectral spatial discretization with a symplectic Størmer-Verlet temporal integrator, ensuring both exponential spatial convergence for smooth solutions and long-term preservation of Hamiltonian structure. To optimize performance, the solver incorporates adaptive timestepping based on Courant-Friedrichs-Lewy (CFL) stability criteria and utilizes Just-In-Time (JIT) compilation for parallelized force computation. The library's capabilities are validated across four canonical physical regimes: dispersive linear wave propagation, static topological kink preservation in phi-fourth theory, integrable breather dynamics in the sine-Gordon model, and non-integrable kink-antikink collisions. Beyond standard numerical validation, this work establishes a multi-faceted analysis framework employing information-theoretic entropy metrics (Shannon, Rényi, and Tsallis), kernel density estimation, and phase space reconstruction to quantify the distinct phenomenological signatures of these regimes. Statistical hypothesis testing confirms that these scenarios represent statistically distinguishable dynamical populations. Benchmarks on standard workstation hardware demonstrate that the implementation achieves high computational efficiency, making it a viable platform for exploratory research and education in nonlinear field theory.

We describe pre-perihelion optical observations of interstellar comet 3I/ATLAS taken during July - September 2025 using the Nordic Optical Telescope. Fixed aperture photometry of the comet is well described by a power law function of heliocentric distance, rH, with the exponent (``index") n = 3.8+/-0.3 across the 4.6 au to 1.8 au distance range (phase function 0.04+/-0.02 magnitude/degree assumed). This indicates that the dust production rates vary in proportion to rH**(-1.8+/-0.3). An rH**(-2) variation is expected of a strongly volatile material, and consistent with independent spectroscopic observations showing that carbon dioxide is the primary driver of activity. The measured heliocentric index is unremarkable in the context of solar system comets, for which n is widely dispersed, and provides no basis on which to describe 3I as either dynamically old (thermally processed) or new (pristine). The morphology of the comet changes from a Sun-facing dust fan in the early 2025 July observations, to one dominated by an antisolar dust tail at later dates. We attribute the delayed emergence of the tail to the large size (effective radius 0.1 mm) and slow ejection (5 m/s) of the optically dominant dust particles, and their consequently sluggish response to solar radiation pressure. Small (micron-sized) particles may be present but not in numbers sufficient to dominate the scattering cross-section. Their relative depletion possibly reflects interparticle cohesion, which binds small particles more effectively than large ones. A similar preponderance of 0.1 mm grains was reported in 2I/Borisov. However, 2I differed from 3I in having a much smaller (asteroid-like) heliocentric index, n = 1.9+/-0.1. Dust production rates in 3I are 180 kg/s at 2 au, compared with 70 kg/s in 2I/Borisov at the same distance.

Modern foundational Multimodal Large Language Models (MLLMs) and video world models have advanced significantly in mathematical, common-sense, and visual reasoning, but their grasp of the underlying physics remains underexplored. Existing benchmarks attempting to measure this matter rely on synthetic, Visual Question Answer templates or focus on perceptual video quality that is tangential to measuring how well the video abides by physical laws. To address this fragmentation, we introduce PhysicsMind, a unified benchmark with both real and simulation environments that evaluates law-consistent reasoning and generation over three canonical principles: Center of Mass, Lever Equilibrium, and Newton's First Law. PhysicsMind comprises two main tasks: i) VQA tasks, testing whether models can reason and determine physical quantities and values from images or short videos, and ii) Video Generation(VG) tasks, evaluating if predicted motion trajectories obey the same center-of-mass, torque, and inertial constraints as the ground truth. A broad range of recent models and video generation models is evaluated on PhysicsMind and found to rely on appearance heuristics while often violating basic mechanics. These gaps indicate that current scaling and training are still insufficient for robust physical understanding, underscoring PhysicsMind as a focused testbed for physics-aware multimodal models. Our data will be released upon acceptance.

For robots to robustly understand and interact with the physical world, it is highly beneficial to have a comprehensive representation - modelling geometry, physics, and visual observations - that informs perception, planning, and control algorithms. We propose a novel dual Gaussian-Particle representation that models the physical world while (i) enabling predictive simulation of future states and (ii) allowing online correction from visual observations in a dynamic world. Our representation comprises particles that capture the geometrical aspect of objects in the world and can be used alongside a particle-based physics system to anticipate physically plausible future states. Attached to these particles are 3D Gaussians that render images from any viewpoint through a splatting process thus capturing the visual state. By comparing the predicted and observed images, our approach generates visual forces that correct the particle positions while respecting known physical constraints. By integrating predictive physical modelling with continuous visually-derived corrections, our unified representation reasons about the present and future while synchronizing with reality. Our system runs in realtime at 30Hz using only 3 cameras. We validate our approach on 2D and 3D tracking tasks as well as photometric reconstruction quality. Videos are found at https://embodied-gaussians.github.io/.

System identification from videos aims to recover object geometry and governing physical laws. Existing methods integrate differentiable rendering with simulation but rely on predefined material priors, limiting their ability to handle unknown ones. We introduce MASIV, the first vision-based framework for material-agnostic system identification. Unlike existing approaches that depend on hand-crafted constitutive laws, MASIV employs learnable neural constitutive models, inferring object dynamics without assuming a scene-specific material prior. However, the absence of full particle state information imposes unique challenges, leading to unstable optimization and physically implausible behaviors. To address this, we introduce dense geometric guidance by reconstructing continuum particle trajectories, providing temporally rich motion constraints beyond sparse visual cues. Comprehensive experiments show that MASIV achieves state-of-the-art performance in geometric accuracy, rendering quality, and generalization ability.

We present a novel structure-preserving framework for solving the Vlasov-Poisson-Landau system of equations using a particle in cell (PIC) discretization combined with discrete gradient time integrators. The Vlasov-Poisson-Landau system is an accurate model for studying hot plasma dynamics at a kinetic scale where small-angle Coulomb collisions dominate. Our scheme guarantees conservation of mass, momentum and energy as well as preservation of the monotonicity of entropy production in both the time-continuous and discrete systems. We employ the conservative integrator for both the Hamiltonian Vlasov-Poisson equations and the dissipative Landau equation using the PETSc library (www.mcs.anl.gov/petsc) to showcase structure-preserving properties.

The collisionless Boltzmann equation (CBE) is a fundamental equation that governs the dynamics of a broad range of astrophysical systems from space plasma to star clusters and galaxies. It is computationally expensive to integrate the CBE directly in a multi-dimensional phase space, and thus the applications to realistic astrophysical problems have been limited so far. Recently, Todorova & Steijl (2020) proposed an efficient quantum algorithm to solve the CBE with significantly reduced computational complexity. We extend the algorithm to perform quantum simulations of self-gravitating systems, incorporating the method to calculate gravity with the major Fourier modes of the density distribution extracted from the solution-encoding quantum state. Our method improves the dependency of time and space complexities on Nv , the number of grid points in each velocity coordinate, compared to the classical simulation methods. We then conduct some numerical demonstrations of our method. We first run a 1+1 dimensional test calculation of free streaming motion on 64*64 grids using 13 simulated qubits and validate our method. We then perform simulations of Jeans collapse, and compare the result with analytic and linear theory calculations. It will thus allow us to perform large-scale CBE simulations on future quantum computers.

Reasoning from sequences of raw sensory data is a ubiquitous problem across fields ranging from medical devices to robotics. These problems often involve using long sequences of raw sensor data (e.g. magnetometers, piezoresistors) to predict sequences of desirable physical quantities (e.g. force, inertial measurements). While classical approaches are powerful for locally-linear prediction problems, they often fall short when using real-world sensors. These sensors are typically non-linear, are affected by extraneous variables (e.g. vibration), and exhibit data-dependent drift. For many problems, the prediction task is exacerbated by small labeled datasets since obtaining ground-truth labels requires expensive equipment. In this work, we present Hierarchical State-Space Models (HiSS), a conceptually simple, new technique for continuous sequential prediction. HiSS stacks structured state-space models on top of each other to create a temporal hierarchy. Across six real-world sensor datasets, from tactile-based state prediction to accelerometer-based inertial measurement, HiSS outperforms state-of-the-art sequence models such as causal Transformers, LSTMs, S4, and Mamba by at least 23% on MSE. Our experiments further indicate that HiSS demonstrates efficient scaling to smaller datasets and is compatible with existing data-filtering techniques. Code, datasets and videos can be found on https://hiss-csp.github.io.

Motion capture from a limited number of body-worn sensors, such as inertial measurement units (IMUs) and pressure insoles, has important applications in health, human performance, and entertainment. Recent work has focused on accurately reconstructing whole-body motion from a specific sensor configuration using six IMUs. While a common goal across applications is to use the minimal number of sensors to achieve required accuracy, the optimal arrangement of the sensors might differ from application to application. We propose a single diffusion model, DiffusionPoser, which reconstructs human motion in real-time from an arbitrary combination of sensors, including IMUs placed at specified locations, and, pressure insoles. Unlike existing methods, our model grants users the flexibility to determine the number and arrangement of sensors tailored to the specific activity of interest, without the need for retraining. A novel autoregressive inferencing scheme ensures real-time motion reconstruction that closely aligns with measured sensor signals. The generative nature of DiffusionPoser ensures realistic behavior, even for degrees-of-freedom not directly measured. Qualitative results can be found on our website: https://diffusionposer.github.io/.

Existing video generation models excel at producing photo-realistic videos from text or images, but often lack physical plausibility and 3D controllability. To overcome these limitations, we introduce PhysCtrl, a novel framework for physics-grounded image-to-video generation with physical parameters and force control. At its core is a generative physics network that learns the distribution of physical dynamics across four materials (elastic, sand, plasticine, and rigid) via a diffusion model conditioned on physics parameters and applied forces. We represent physical dynamics as 3D point trajectories and train on a large-scale synthetic dataset of 550K animations generated by physics simulators. We enhance the diffusion model with a novel spatiotemporal attention block that emulates particle interactions and incorporates physics-based constraints during training to enforce physical plausibility. Experiments show that PhysCtrl generates realistic, physics-grounded motion trajectories which, when used to drive image-to-video models, yield high-fidelity, controllable videos that outperform existing methods in both visual quality and physical plausibility. Project Page: https://cwchenwang.github.io/physctrl

Video imaging is often affected by complex degradations such as blur, noise, and compression artifacts. Traditional restoration methods follow a "single-task single-model" paradigm, resulting in poor generalization and high computational cost, limiting their applicability in real-world scenarios with diverse degradation types. We propose UniFlowRestore, a general video restoration framework that models restoration as a time-continuous evolution under a prompt-guided and physics-informed vector field. A physics-aware backbone PhysicsUNet encodes degradation priors as potential energy, while PromptGenerator produces task-relevant prompts as momentum. These components define a Hamiltonian system whose vector field integrates inertial dynamics, decaying physical gradients, and prompt-based guidance. The system is optimized via a fixed-step ODE solver to achieve efficient and unified restoration across tasks. Experiments show that UniFlowRestore delivers stateof-the-art performance with strong generalization and efficiency. Quantitative results demonstrate that UniFlowRestore achieves state-of-the-art performance, attaining the highest PSNR (33.89 dB) and SSIM (0.97) on the video denoising task, while maintaining top or second-best scores across all evaluated tasks.

Here we present a machine learning framework and model implementation that can learn to simulate a wide variety of challenging physical domains, involving fluids, rigid solids, and deformable materials interacting with one another. Our framework---which we term "Graph Network-based Simulators" (GNS)---represents the state of a physical system with particles, expressed as nodes in a graph, and computes dynamics via learned message-passing. Our results show that our model can generalize from single-timestep predictions with thousands of particles during training, to different initial conditions, thousands of timesteps, and at least an order of magnitude more particles at test time. Our model was robust to hyperparameter choices across various evaluation metrics: the main determinants of long-term performance were the number of message-passing steps, and mitigating the accumulation of error by corrupting the training data with noise. Our GNS framework advances the state-of-the-art in learned physical simulation, and holds promise for solving a wide range of complex forward and inverse problems.

Particle gradient descent, which uses particles to represent a probability measure and performs gradient descent on particles in parallel, is widely used to optimize functions of probability measures. This paper considers particle gradient descent with a finite number of particles and establishes its theoretical guarantees to optimize functions that are displacement convex in measures. Concretely, for Lipschitz displacement convex functions defined on probability over R^d, we prove that O(1/epsilon^2) particles and O(d/epsilon^4) computations are sufficient to find the epsilon-optimal solutions. We further provide improved complexity bounds for optimizing smooth displacement convex functions. We demonstrate the application of our results for function approximation with specific neural architectures with two-dimensional inputs.

In this paper, we develop and implement an efficient asymptotic-preserving (AP) scheme to solve the gas mixture of Boltzmann equations under the disparate mass scaling relevant to the so-called "epochal relaxation" phenomenon. The disparity in molecular masses, ranging across several orders of magnitude, leads to significant challenges in both the evaluation of collision operators and the designing of time-stepping schemes to capture the multi-scale nature of the dynamics. A direct implementation of the spectral method faces prohibitive computational costs as the mass ratio increases due to the need to resolve vastly different thermal velocities. Unlike [I. M. Gamba, S. Jin, and L. Liu, Commun. Math. Sci., 17 (2019), pp. 1257-1289], we propose an alternative approach based on proper truncation of asymptotic expansions of the collision operators, which significantly reduces the computational complexity and works well for small varepsilon. By incorporating the separation of three time scales in the model's relaxation process [P. Degond and B. Lucquin-Desreux, Math. Models Methods Appl. Sci., 6 (1996), pp. 405-436], we design an AP scheme that captures the specific dynamics of the disparate mass model while maintaining computational efficiency. Numerical experiments demonstrate the effectiveness of the proposed scheme in handling large mass ratios of heavy and light species, as well as capturing the epochal relaxation phenomenon.

Active matter systems, from self-propelled colloids to motile bacteria, are characterized by the conversion of free energy into useful work at the microscopic scale. These systems generically involve physics beyond the reach of equilibrium statistical mechanics, and a persistent challenge has been to understand the nature of their nonequilibrium states. The entropy production rate and the magnitude of the steady-state probability current provide quantitative ways to do so by measuring the breakdown of time-reversal symmetry and the strength of nonequilibrium transport of measure. Yet, their efficient computation has remained elusive, as they depend on the system's unknown and high-dimensional probability density. Here, building upon recent advances in generative modeling, we develop a deep learning framework that estimates the score of this density. We show that the score, together with the microscopic equations of motion, gives direct access to the entropy production rate, the probability current, and their decomposition into local contributions from individual particles, spatial regions, and degrees of freedom. To represent the score, we introduce a novel, spatially-local transformer-based network architecture that learns high-order interactions between particles while respecting their underlying permutation symmetry. We demonstrate the broad utility and scalability of the method by applying it to several high-dimensional systems of interacting active particles undergoing motility-induced phase separation (MIPS). We show that a single instance of our network trained on a system of 4096 particles at one packing fraction can generalize to other regions of the phase diagram, including systems with as many as 32768 particles. We use this observation to quantify the spatial structure of the departure from equilibrium in MIPS as a function of the number of particles and the packing fraction.

Macroscopic EEG fields can be an explicit top-down neocortical mechanism that directly drives bottom-up processes that describe memory, attention, and other neuronal processes. The top-down mechanism considered are macrocolumnar EEG firings in neocortex, as described by a statistical mechanics of neocortical interactions (SMNI), developed as a magnetic vector potential A. The bottom-up process considered are Ca^{2+} waves prominent in synaptic and extracellular processes that are considered to greatly influence neuronal firings. Here, the complimentary effects are considered, i.e., the influence of A on Ca^{2+} momentum, p. The canonical momentum of a charged particle in an electromagnetic field, mathbfΠ = p + q A (SI units), is calculated, where the charge of Ca^{2+} is q = - 2 e, e is the magnitude of the charge of an electron. Calculations demonstrate that macroscopic EEG A can be quite influential on the momentum p of Ca^{2+} ions, in both classical and quantum mechanics. Molecular scales of Ca^{2+} wave dynamics are coupled with A fields developed at macroscopic regional scales measured by coherent neuronal firing activity measured by scalp EEG. The project has three main aspects: fitting A models to EEG data as reported here, building tripartite models to develop A models, and studying long coherence times of Ca^{2+} waves in the presence of A due to coherent neuronal firings measured by scalp EEG. The SMNI model supports a mechanism wherein the p + q A interaction at tripartite synapses, via a dynamic centering mechanism (DCM) to control background synaptic activity, acts to maintain short-term memory (STM) during states of selective attention.

We show that Hertzian particle contacts are the underlying cause of the as-yet-unexplained noninteger power laws in weakly nonlinear rheology. In the medium amplitude oscillatory shear (MAOS) region, the cubic scaling of the leading order nonlinear shear stress (σ_3 sim γ_0^{m_3}, m_3=3) is the standard expectation. Expanding on the work by Natalia et al. [J. Rheol. 64 625-635 (2020)], we report an extensive data set of noncubical, noninteger power law scalings m_3 for particle suspensions in two immiscible fluids with a capillary attractive interaction, known as capillary suspensions. Here, we show that distinct power law exponents are found for the storage and loss moduli and these noninteger scalings occur at every secondary fluid concentration for two different contact angles. These compelling results indicate that the noninteger scalings are related to the underlying microstructure of capillary suspensions. We show that the magnitude of the third harmonic elastic stress scaling m_3,elastic originates from Hertzian-like contacts in combination with the attractive capillary force. The related third harmonic viscous stress scaling m_3,viscous is, found to be associated with adhesive-controlled friction. These observations, conducted for a wide range of compositions, can help explain previous reports of noninteger scaling for materials involving particle contacts and offers a new opportunity using the variable power law exponent of MAOS rheology to reveal the physics of particle bonds and friction in the rheological response under low deformation instead of at very high shear rates.

Diffusion models can generate realistic videos, but existing methods rely on implicitly learning physical reasoning from large-scale text-video datasets, which is costly, difficult to scale, and still prone to producing implausible motions that violate fundamental physical laws. We introduce a training-free framework that improves physical plausibility at inference time by explicitly reasoning about implausibility and guiding the generation away from it. Specifically, we employ a lightweight physics-aware reasoning pipeline to construct counterfactual prompts that deliberately encode physics-violating behaviors. Then, we propose a novel Synchronized Decoupled Guidance (SDG) strategy, which leverages these prompts through synchronized directional normalization to counteract lagged suppression and trajectory-decoupled denoising to mitigate cumulative trajectory bias, ensuring that implausible content is suppressed immediately and consistently throughout denoising. Experiments across different physical domains show that our approach substantially enhances physical fidelity while maintaining photorealism, despite requiring no additional training. Ablation studies confirm the complementary effectiveness of both the physics-aware reasoning component and SDG. In particular, the aforementioned two designs of SDG are also individually validated to contribute critically to the suppression of implausible content and the overall gains in physical plausibility. This establishes a new and plug-and-play physics-aware paradigm for video generation.

This paper studies the scale and redshift variation of density and velocity distributions in self-gravitating collisionless dark matter flow by a halo-based non-projection approach. All particles are divided into halo and out-of-halo particles for redshift variation of distributions. Without projecting particle fields onto a structured grid, the scale variation is analyzed by identifying all particle pairs on different scales r. We demonstrate that: i) Delaunay tessellation can be used to reconstruct the density field. The density correlation, spectrum, and dispersion functions were obtained, modeled, and compared with the N-body simulation; ii) the velocity distributions are symmetric on both small and large scales and are non-symmetric with a negative skewness on intermediate scales due to the inverse energy cascade at a constant rate varepsilon_u; iii) On small scales, the even order moments of pairwise velocity Delta u_L follow a two-thirds law (-varepsilon_ur)^{2/3}, while the odd order moments follow a linear scaling langle(Delta u_L)^{2n+1}rangle=(2n+1)langle(Delta u_L)^{2n}ranglelangleDelta u_Lrangler; iv) The scale variation of the velocity distributions was studied for longitudinal velocities u_L or u_L^{'}, pairwise velocity (velocity difference) Delta u_L=u_L^{'}-u_L and velocity sum Sigma u_L=u^{'}_L+u_L. Fully developed velocity fields are never Gaussian on any scale, despite that they can initially be Gaussian; v) On small scales, u_L and Sigma u_L can be modeled by a X distribution to maximize the system entropy; vi) On large scales, Delta u_L and Sigma u_L can be modeled by a logistic or a X distribution; vii) the redshift variation of the velocity distributions follows the evolution of the X distribution involving a shape parameter alpha(z) decreasing with time.

Using absorbance measurements through a Couette cell containing an emulsion of buoyant droplets, volume fraction profiles are measured at various shear rates. These viscous resuspension experiments allow a direct determination of the normal stress in the vorticity direction in connection with the suspension balance model that has been developed for suspensions of solid particles. The results unambigously show that the normal viscosity responsible for the shear-induced migration of the droplets is independant on the capillary number, implying that particle deformation does not play a great role. It is similar to that of rigid particles at volume fractions below 40\% but much smaller at higher ones.

We present a theoretical study of the magnetic field generated by a toroidal current loop situated in the equatorial plane of a non-rotating Schwarzschild black hole, based on the dynamics of charged particles. Using the exact general relativistic solution for the magnetic field, we analyze particle motion both analytically and numerically, identifying regions of stable and unstable orbits. In particular, we classify charged particle dynamics into attractive and repulsive Lorentz force configurations and show that in the attractive case, charged particles can accumulate near the current loop, forming collective currents that oppose the original current loop magnetic field. We demonstrate that charged particle accumulation can lead to the formation of toroidal structures analogous to radiation belts in the BH magnetosphere. We compare the curved spacetime solution to flat spacetime analogs and highlight general relativistic effects such as the existence of the innermost stable circular orbit for charged particles, which sets a lower bound for radiation belt formation. The divergence of the vector potential at the loop location in the idealized infinitesimal loop model is addressed, and we argue that a physically realistic model must consider a finite-width current distribution to avoid unphysical divergences in the effective potential.

Accurate knowledge of the properties of hydrogen at high compression is crucial for astrophysics (e.g. planetary and stellar interiors, brown dwarfs, atmosphere of compact stars) and laboratory experiments, including inertial confinement fusion. There exists experimental data for the equation of state, conductivity, and Thomson scattering spectra. However, the analysis of the measurements at extreme pressures and temperatures typically involves additional model assumptions, which makes it difficult to assess the accuracy of the experimental data. rigorously. On the other hand, theory and modeling have produced extensive collections of data. They originate from a very large variety of models and simulations including path integral Monte Carlo (PIMC) simulations, density functional theory (DFT), chemical models, machine-learned models, and combinations thereof. At the same time, each of these methods has fundamental limitations (fermion sign problem in PIMC, approximate exchange-correlation functionals of DFT, inconsistent interaction energy contributions in chemical models, etc.), so for some parameter ranges accurate predictions are difficult. Recently, a number of breakthroughs in first principle PIMC and DFT simulations were achieved which are discussed in this review. Here we use these results to benchmark different simulation methods. We present an update of the hydrogen phase diagram at high pressures, the expected phase transitions, and thermodynamic properties including the equation of state and momentum distribution. Furthermore, we discuss available dynamic results for warm dense hydrogen, including the conductivity, dynamic structure factor, plasmon dispersion, imaginary-time structure, and density response functions. We conclude by outlining strategies to combine different simulations to achieve accurate theoretical predictions.

High-fidelity scientific simulations are now producing unprecedented amounts of data, creating a storage and analysis bottleneck. A single simulation can generate tremendous data volumes, often forcing researchers to discard valuable information. A prime example of this is plasma turbulence described by the gyrokinetic equations: nonlinear, multiscale, and 5D in phase space. It constitutes one of the most computationally demanding frontiers of modern science, with runs taking weeks and yielding tens of terabytes of data dumps. The increasing storage demands underscore the importance of compression. However, reconstructed snapshots do not necessarily preserve essential physical quantities. We present a spatiotemporal evaluation pipeline, accounting for structural phenomena and multi-scale transient fluctuations to assess the degree of physical fidelity. Indeed, we find that various compression techniques lack preservation of both spatial mode structure and temporal turbulence characteristics. Therefore, we explore Physics-Informed Neural Compression (PINC), which incorporates physics-informed losses tailored to gyrokinetics and enables extreme compressions ratios of over 70,000x. Entropy coding on top of PINC further pushes it to 120,000x. This direction provides a viable and scalable solution to the prohibitive storage demands of gyrokinetics, enabling post-hoc analyses that were previously infeasible.

Physical principles are fundamental to realistic visual simulation, but remain a significant oversight in transformer-based video generation. This gap highlights a critical limitation in rendering rigid body motion, a core tenet of classical mechanics. While computer graphics and physics-based simulators can easily model such collisions using Newton formulas, modern pretrain-finetune paradigms discard the concept of object rigidity during pixel-level global denoising. Even perfectly correct mathematical constraints are treated as suboptimal solutions (i.e., conditions) during model optimization in post-training, fundamentally limiting the physical realism of generated videos. Motivated by these considerations, we introduce, for the first time, a physics-aware reinforcement learning paradigm for video generation models that enforces physical collision rules directly in high-dimensional spaces, ensuring the physics knowledge is strictly applied rather than treated as conditions. Subsequently, we extend this paradigm to a unified framework, termed Mimicry-Discovery Cycle (MDcycle), which allows substantial fine-tuning while fully preserving the model's ability to leverage physics-grounded feedback. To validate our approach, we construct new benchmark PhysRVGBench and perform extensive qualitative and quantitative experiments to thoroughly assess its effectiveness.

Dynamics models learned from visual observations have shown to be effective in various robotic manipulation tasks. One of the key questions for learning such dynamics models is what scene representation to use. Prior works typically assume representation at a fixed dimension or resolution, which may be inefficient for simple tasks and ineffective for more complicated tasks. In this work, we investigate how to learn dynamic and adaptive representations at different levels of abstraction to achieve the optimal trade-off between efficiency and effectiveness. Specifically, we construct dynamic-resolution particle representations of the environment and learn a unified dynamics model using graph neural networks (GNNs) that allows continuous selection of the abstraction level. During test time, the agent can adaptively determine the optimal resolution at each model-predictive control (MPC) step. We evaluate our method in object pile manipulation, a task we commonly encounter in cooking, agriculture, manufacturing, and pharmaceutical applications. Through comprehensive evaluations both in the simulation and the real world, we show that our method achieves significantly better performance than state-of-the-art fixed-resolution baselines at the gathering, sorting, and redistribution of granular object piles made with various instances like coffee beans, almonds, corn, etc.

The friction coefficient of a particle can depend on its position as it does when the particle is near a wall. We formulate the dynamics of particles with such state-dependent friction coefficients in terms of a general Langevin equation with multiplicative noise, whose evaluation requires the introduction of specific rules. Two common conventions, the Ito and the Stratonovich, provide alternative rules for evaluation of the noise, but other conventions are possible. We show the requirement that a particle's distribution function approach the Boltzmann distribution at long times dictates that a drift term must be added to the Langevin equation. This drift term is proportional to the derivative of the diffusion coefficient times a factor that depends on the convention used to define the multiplicative noise. We explore the consequences of this result in a number examples with spatially varying diffusion coefficients. We also derive path integral representations for arbitrary interpretation of the noise, and use it in a perturbative study of correlations in a simple system.

In October 2007, a Research Proposal for the University of Sydney, Australia, the author suggested that biovie-physical phenomenon as `electrodynamic dependant biological vision', is governed by relativistic quantum laws and biovision. The phenomenon on the basis of `biovielectroluminescence', satisfies man/microbio/megabio/computer vision (MMMCV), as a robust candidate for physical and visual sciences. The general aim of this addendum is to present a refined text of Sections 1-3 of that proposal and highlighting the contents of its Appendix in form of a `Mechanisms' Section. We then briefly remind in an article aimed for December 2007, by appending two more equations into Section 3, a theoretical II-time scenario as a time model well-proposed for the phenomenon. The time model within the core of the proposal, plays a significant role in emphasizing the principle points on Objectives no. 1-8, Sub-hypothesis 3.1.2, mentioned in Article [arXiv:0710.0410]. It also expresses the time concept in terms of causing quantized energy f(|E|) of time |t|, emit in regard to shortening the probability of particle loci as predictable patterns of particle's un-occurred motion, a solution to Heisenberg's uncertainty principle (HUP) into a simplistic manner. We conclude that, practical frames via a time algorithm to this model, fixates such predictable patterns of motion of scenery bodies onto recordable observation points of a MMMCV system. It even suppresses/predicts superposition phenomena coming from a human subject and/or other bio-subjects for any decision making event, e.g., brainwave quantum patterns based on vision. Maintaining the existential probability of Riemann surfaces of II-time scenarios in the context of biovielectroluminescence, makes motion-prediction a possibility.

Frontier LLMs now perform strongly across a wide range of physics evaluations, but it is hard to disentangle genuine reasoning from recall of established science. We introduce DiscoverPhysics, an interactive benchmark that asks a LLM agent to discover the laws of motion of a simulated world whose physics deliberately deviates from our own. We construct 22 worlds governed by, among others, screened and fractional-power gravity, multi-species couplings, hidden dark-matter-like particles, non-coordinate-free physics, and time-varying interactions. Each world is generated on demand by an N-body simulator, for which the agent proposes several rounds of experiments, observes raw trajectory data, and ultimately submits both a natural-language explanation of the world's physics and a Python implementation of the inferred law. Because solving a world requires the agent to design informative experiments and revise its hypotheses, the benchmark probes long-horizon reasoning over an experimental history. We evaluate submissions along two complementary axes: trajectory MSE on held-out particles and an LLM-judged explanation score following an expert-written rubric assessing conceptual understanding of each world. Across eleven frontier models, we find that the strongest agents pass only half of the worlds and consistently fail on those where latent structure must be uncovered. Open-source models lag substantially behind commercial models, both in their ability to design informative experiments and in extracting conclusions from the data. We further find that good predictive accuracy does not guarantee high explanation quality and that conceptual understanding depends on hypothesis refinement through well-chosen experiments.

Scientific foundation models hold great promise for advancing nuclear and particle physics by improving analysis precision and accelerating discovery. Yet, progress in this field is often limited by the lack of openly available large scale datasets, as well as standardized evaluation tasks and metrics. Furthermore, the specialized knowledge and software typically required to process particle physics data pose significant barriers to interdisciplinary collaboration with the broader machine learning community. This work introduces a large, openly accessible dataset of 10 million simulated proton-proton collisions, designed to support self-supervised training of foundation models. To facilitate ease of use, the dataset is provided in a common NumPy format. In addition, it includes 70,000 labeled examples spanning three well defined downstream tasks: track finding, particle identification, and noise tagging, to enable systematic evaluation of the foundation model's adaptability. The simulated data are generated using the Pythia Monte Carlo event generator at a center of mass energy of sqrt(s) = 200 GeV and processed with Geant4 to include realistic detector conditions and signal emulation in the sPHENIX Time Projection Chamber at the Relativistic Heavy Ion Collider, located at Brookhaven National Laboratory. This dataset resource establishes a common ground for interdisciplinary research, enabling machine learning scientists and physicists alike to explore scaling behaviors, assess transferability, and accelerate progress toward foundation models in nuclear and high energy physics. The complete simulation and reconstruction chain is reproducible with the sPHENIX software stack. All data and code locations are provided under Data Accessibility.

The abundance of data has given machine learning considerable momentum in natural sciences and engineering, though modeling of physical processes is often difficult. A particularly tough problem is the efficient representation of geometric boundaries. Triangularized geometric boundaries are well understood and ubiquitous in engineering applications. However, it is notoriously difficult to integrate them into machine learning approaches due to their heterogeneity with respect to size and orientation. In this work, we introduce an effective theory to model particle-boundary interactions, which leads to our new Boundary Graph Neural Networks (BGNNs) that dynamically modify graph structures to obey boundary conditions. The new BGNNs are tested on complex 3D granular flow processes of hoppers, rotating drums and mixers, which are all standard components of modern industrial machinery but still have complicated geometry. BGNNs are evaluated in terms of computational efficiency as well as prediction accuracy of particle flows and mixing entropies. BGNNs are able to accurately reproduce 3D granular flows within simulation uncertainties over hundreds of thousands of simulation timesteps. Most notably, in our experiments, particles stay within the geometric objects without using handcrafted conditions or restrictions.

Iron inclusions embedded inside dust grains play a crucial role in both internal alignment (IA) via Barnett relaxation and external alignment via the MAgnetically Enhanced RAdiative Torque (MRAT) mechanism. Moreover, inelastic relaxation is predicted to dominate over Barnett relaxation in driving the IA of micron-sized and very large grains above 10mu m (VLGs). Yet, a detailed modeling of polarized thermal dust emission from Class 0/I Young Stellar Objects (YSOs) taking into account these effects and their observational constraints is still lacking. In this paper, we update the POLARIS code and use it to perform synthetic dust polarization modeling for MHD simulations of an intermediate-mass YSO. Results will be post-processed with CASA to confront ALMA polarimetric observations. We found that to reproduce the high polarization degree of p sim 5-30% observed in protostellar envelopes by ALMA, micron-sized and VLGs must contain iron inclusions with N_{rm cl} sim 5 - 10^{3} iron atoms per cluster, assuming 30% of iron abundance locked inside dust grains under the cluster form. Inside the inner sim 500 au region, inelastic relaxation must participate in driving the grain internal alignment, and grains must contain larger iron inclusions of N_{rm cl} sim 10^{2}-10^{4} and grow beyond geq 10mu m to reproduce sim 3-10% of dust polarization observed by ALMA. But given such a combination, the internal alignment and MRAT efficiency acting on VLGs still decrease toward the center, inducing the decrease of p(%) with increasing gas density, reaching p sim 1% inside the disk.

The solar wind is a medium characterized by strong turbulence and significant field fluctuations on various scales. Recent observations have revealed that magnetic turbulence exhibits a self-similar behavior. Similarly, high-resolution measurements of the proton density have shown comparable characteristics, prompting several studies into the multifractal properties of these density fluctuations. In this work, we show that low-resolution observations of the solar wind proton density over time, recorded by various spacecraft at Lagrange point L1, also exhibit non-linear and multifractal structures. The novelty of our study lies in the fact that this is the first systematic analysis of solar wind proton density using low-resolution (hourly) data collected by multiple spacecraft at the L1 Lagrange point over a span of 17 years. Furthermore, we interpret our results within the framework of non-extensive statistical mechanics, which appears to be consistent with the observed nonlinear behavior. Based on the data, we successfully validate the q-triplet predicted by non-extensive statistical theory. To the best of our knowledge, this represents the most rigorous and systematic validation to date of the q-triplet in the solar wind.

Ever since the original algorithm by Nesterov (1983), the true nature of the acceleration phenomenon has remained elusive, with various interpretations of why the method is actually faster. The diagnosis of the algorithm through the lens of Ordinary Differential Equations (ODEs) and the corresponding dynamical system formulation to explain the underlying dynamics has a rich history. In the literature, the ODEs that explain algorithms are typically derived by considering the limiting case of the algorithm maps themselves, that is, an ODE formulation follows the development of an algorithm. This obfuscates the underlying higher order principles and thus provides little evidence of the working of the algorithm. Such has been the case with Nesterov algorithm and the various analogies used to describe the acceleration phenomena, viz, momentum associated with the rolling of a Heavy-Ball down a slope, Hessian damping etc. The main focus of our work is to ideate the genesis of the Nesterov algorithm from the viewpoint of dynamical systems leading to demystifying the mathematical rigour behind the algorithm. Instead of reverse engineering ODEs from discrete algorithms, this work explores tools from the recently developed control paradigm titled Passivity and Immersion approach and the Geometric Singular Perturbation theory which are applied to arrive at the formulation of a dynamical system that explains and models the acceleration phenomena. This perspective helps to gain insights into the various terms present and the sequence of steps used in Nesterovs accelerated algorithm for the smooth strongly convex and the convex case. The framework can also be extended to derive the acceleration achieved using the triple momentum method and provides justifications for the non-convergence to the optimal solution in the Heavy-Ball method.

We introduce the Continuum Physical Dataset (ContPhy), a novel benchmark for assessing machine physical commonsense. ContPhy complements existing physical reasoning benchmarks by encompassing the inference of diverse physical properties, such as mass and density, across various scenarios and predicting corresponding dynamics. We evaluated a range of AI models and found that they still struggle to achieve satisfactory performance on ContPhy, which shows that the current AI models still lack physical commonsense for the continuum, especially soft-bodies, and illustrates the value of the proposed dataset. We also introduce an oracle model (ContPRO) that marries the particle-based physical dynamic models with the recent large language models, which enjoy the advantages of both models, precise dynamic predictions, and interpretable reasoning. ContPhy aims to spur progress in perception and reasoning within diverse physical settings, narrowing the divide between human and machine intelligence in understanding the physical world. Project page: https://physical-reasoning-project.github.io.

Recent advances in diffusion-based video generation have achieved remarkable visual realism but still struggle to obey basic physical laws such as gravity, inertia, and collision. Generated objects often move inconsistently across frames, exhibit implausible dynamics, or violate physical constraints, limiting the realism and reliability of AI-generated videos. We address this gap by introducing Physical Simulator In-the-loop Video Generation (PSIVG), a novel framework that integrates a physical simulator into the video diffusion process. Starting from a template video generated by a pre-trained diffusion model, PSIVG reconstructs the 4D scene and foreground object meshes, initializes them within a physical simulator, and generates physically consistent trajectories. These simulated trajectories are then used to guide the video generator toward spatio-temporally physically coherent motion. To further improve texture consistency during object movement, we propose a Test-Time Texture Consistency Optimization (TTCO) technique that adapts text and feature embeddings based on pixel correspondences from the simulator. Comprehensive experiments demonstrate that PSIVG produces videos that better adhere to real-world physics while preserving visual quality and diversity. Project Page: https://vcai.mpi-inf.mpg.de/projects/PSIVG/

It is shown that in the complex trajectory representation of quantum mechanics, the Born's Psi^{\star}Ψprobability density can be obtained from the imaginary part of the velocity field of particles on the real axis. Extending this probability axiom to the complex plane, we first attempt to find a probability density by solving an appropriate conservation equation. The characteristic curves of this conservation equation are found to be the same as the complex paths of particles in the new representation. The boundary condition in this case is that the extended probability density should agree with the quantum probability rule along the real line. For the simple, time-independent, one-dimensional problems worked out here, we find that a conserved probability density can be derived from the velocity field of particles, except in regions where the trajectories were previously suspected to be nonviable. An alternative method to find this probability density in terms of a trajectory integral, which is easier to implement on a computer and useful for single particle solutions, is also presented. Most importantly, we show, by using the complex extension of Schrodinger equation, that the desired conservation equation can be derived from this definition of probability density.

We present IF-D, a large-scale inertial dataset designed to enable self-supervised and foundational learning for IMU time series. IF-D comprises continuous, long-duration multichannel recordings (accelerometer, gyroscope, magnetometer) sampled at 200Hz using a UM7 IMU mounted inside a 3D-printed spherical enclosure that promotes diverse, free rotations during vehicle traversal. The collection spans approximately 135 minutes of recording, yielding around 1.6 million samples across nine sensor channels. We describe the data acquisition setup, preprocessing, and calibration procedures (six-orientation accelerometer calibration, stationary gyroscope bias estimation, and ellipsoid fitting for magnetometer hard-/soft-iron correction), and provide quantitative calibration results. IF-D is designed to mitigate platform specific motion bias and expose models to both physical dynamics and typical measurement noise, thereby facilitating robust representation learning and downstream tasks such as event detection, motion mode recognition, and inertial navigation.

Advances in time-resolved Particle Tracking Velocimetry (4D-PTV) techniques have been consistently revealed more accurate Lagrangian particle motions. A novel track initialisation technique as a complementary part of 4D-PTV, based on local temporal and spatial coherency of neighbour trajectories, is proposed. The proposed Lagrangian Coherent Track Initialisation (LCTI) applies physics-based Finite Time Lyapunov Exponent (FTLE) to build four frame coherent tracks. We locally determine the boundaries (i.e., ridges) of Lagrangian Coherent Structures (LCS) among neighbour trajectories by using FTLE to distinguish clusters of coherent motions. To evaluate the proposed technique, we created an open-access synthetic Lagrangian and Eulerian dataset of the wake downstream of a smooth cylinder at a Reynolds number equal to 3900 obtained from 3D Direct Numerical Simulation (DNS). The dataset is available to the public. Performance of the proposed method based on three characteristic parameters, temporal scale, particle concentration (i.e., density), and noise ratio, showed robust behaviour in finding true tracks compared to the recent initialisation algorithms. Sensitivity of LCTI to the number of untracked and wrong tracks are also discussed. We address the capability of using the proposed method as a function of a 4D-PTV scheme in the Lagrangian Particle Tracking challenge for a flow with high particle densities. Finally, the LCTI behaviour was assessed in a real jet impingement experiment. LCTI was found to be a reliable tracking tool in complex flow motions, with a strength revealed for flows with high particle concentrations.

This paper reports on the second "Throughput" phase of the Tracking Machine Learning (TrackML) challenge on the Codalab platform. As in the first "Accuracy" phase, the participants had to solve a difficult experimental problem linked to tracking accurately the trajectory of particles as e.g. created at the Large Hadron Collider (LHC): given O(10^5) points, the participants had to connect them into O(10^4) individual groups that represent the particle trajectories which are approximated helical. While in the first phase only the accuracy mattered, the goal of this second phase was a compromise between the accuracy and the speed of inference. Both were measured on the Codalab platform where the participants had to upload their software. The best three participants had solutions with good accuracy and speed an order of magnitude faster than the state of the art when the challenge was designed. Although the core algorithms were less diverse than in the first phase, a diversity of techniques have been used and are described in this paper. The performance of the algorithms are analysed in depth and lessons derived.

One of the current goals of neutrino experiments is to precisely determine standard unknown oscillation parameters such as the leptonic CP phase and mass hierarchy. Lorentz invariance violation represents a potential physics factor that could influence the experiment's ability to achieve these precise determinations. This study investigates the influence of Lorentz invariance violation (LIV) on oscillation dynamics, particularly through non-isotropic CPT-violating (a^{X}_{emu}, a^{X}_{etau}, a^{X}_{mutau}) and CPT-conserving (c^{XY}_{emu}, c^{XY}_{e tau}, c^{XY}_{mu tau}) parameters within the Deep Underground Neutrino Experiment (DUNE). We analyze the impact of these parameters on the mass hierarchy (MH) and Dirac CP phase sensitivity measurements. Our findings indicate that while MH sensitivity remains relatively unaffected, only the presence of c^{XY}_{mu tau} significantly deteriorates MH sensitivity, albeit remaining above the 5 sigma threshold. Additionally, we observe a substantial compromise in CP sensitivity due to the c^{XY}_{e mu} and c^{XY}_{e tau} parameters.

Most first-order optimizers treat matrix-valued parameters as vectors, ignoring the intrinsic geometry of hidden-layer weights in neural networks. Muon addresses this mismatch by updating along the polar factor of a momentum matrix, but its theoretical understanding has lagged behind practice. In particular, practical implementations incorporate Nesterov momentum, compute the polar factor only approximately, and operate with stochastic gradients that may be heavy-tailed. We close this gap by developing a convergence theory for Muon with Nesterov momentum and inexact polar decomposition in non-convex matrix optimization under heavy-tailed noise. Our analysis builds on a unified framework for inexact polar decomposition that captures practical iterative approximations such as Newton-Schulz and quantifies how their errors propagate through the optimization dynamics. Under this framework, we establish an optimal iteration and sample complexity of O left(varepsilon^{-(3α-2){(α-1)}} right) for finding an varepsilon-stationary point, where αin(1,2] denotes the heavy-tail index. For the inexact-polar setting with σ_1=0, we also provide guarantees that do not require prior knowledge of α. We analyze a randomized low-rank polar decomposition that is substantially more efficient than full-space methods while remaining compatible with our theory. Numerical experiments further demonstrate the effectiveness of the proposed inexact and randomized variants.

Video generation models have emerged as a promising paradigm for embodied world simulation. However, both general-domain video generators and robot-specific data fine-tuned models can still produce physically implausible manipulations, including discontinuous motion trajectories and inconsistent robot-object interactions, which limits their reliability as world simulators. Through extensive experiments, we find that such physical instability mainly arises from two factors: deformation of moving objects and implausible spatio-temporal correlations among interacting entities, particularly during contact. Building on this observation, we propose PhysisForcing, a scalable training framework that strengthens physical consistency by focusing supervision on physics-informative regions through joint optimization of pixel-level and semantic-level features. The framework consists of a pixel-level trajectory alignment loss, which supervises DiT features using reference point trajectories, and a semantic-level relational alignment loss, which aligns DiT features with inter-region relations extracted from a frozen video understanding encoder. Extensive experiments on R-Bench, PAI-Bench, and EZS-Bench show that PhysisForcing consistently improves embodied video generation over strong baselines, improving the Wan2.2-I2V-A14B and Cosmos3-Nano base models on R-Bench by 22.3\% and 9.2\% (7.1\% and 3.7\% over vanilla finetuning), with the Cosmos3-Nano variant attaining the best overall score. Beyond generation, as a world model under the WorldArena action-planner protocol it raises the closed-loop success rate from 16.0\% to 24.0\% and further improves downstream policy success, indicating that physically aligned video models yield stronger representations for robotic manipulation.

Rapid advancement of machine learning solutions has often coincided with the production of a test public data set. Such datasets reduce the largest barrier to entry for tackling a problem -- procuring data -- while also providing a benchmark to compare different solutions. Furthermore, large datasets have been used to train high-performing feature finders which are then used in new approaches to problems beyond that initially defined. In order to encourage the rapid development in the analysis of data collected using liquid argon time projection chambers, a class of particle detectors used in high energy physics experiments, we have produced the PILArNet, first 2D and 3D open dataset to be used for a couple of key analysis tasks. The initial dataset presented in this paper contains 300,000 samples simulated and recorded in three different volume sizes. The dataset is stored efficiently in sparse 2D and 3D matrix format with auxiliary information about simulated particles in the volume, and is made available for public research use. In this paper we describe the dataset, tasks, and the method used to procure the sample.

3D Gaussian Splatting has recently enabled fast and photorealistic reconstruction of static 3D scenes. However, dynamic editing of such scenes remains a significant challenge. We introduce a novel framework, Physics-Guided Score Distillation, to address a fundamental conflict: physics simulation provides a strong motion prior that is insufficient for photorealism , while video-based Score Distillation Sampling (SDS) alone cannot generate coherent motion for complex, multi-particle scenarios. We resolve this through a unified optimization framework where physics simulation guides Score Distillation to jointly refine the motion prior for photorealism while simultaneously optimizing appearance. Specifically, we learn a neural dynamics model that predicts particle motion and appearance, optimized end-to-end via a combined loss integrating Video-SDS for photorealism with our physics-guidance prior. This allows for photorealistic refinements while ensuring the dynamics remain plausible. Our framework enables scene-wide dynamic weather effects, including snowfall, rainfall, fog, and sandstorms, with physically plausible motion. Experiments demonstrate our physics-guided approach significantly outperforms baselines, with ablations confirming this joint refinement is essential for generating coherent, high-fidelity dynamics.

Expanding medium is very common in many different fields, such as biology and cosmology. It brings a nonnegligible influence on particle's diffusion, which is quite different from the effect of an external force field. The dynamic mechanism of particle's motion in expanding medium has only been investigated in the framework of continuous-time random walk. To focus on more diffusion processes and physical observables, we build the Langevin picture of anomalous diffusion in expanding medium, and conduct detailed analyses in the framework of Langevin equation. With the help of a subordinator, both subdiffusion process and superdiffusion process in expanding medium are discussed. We find that the expanding medium with different changing rate (exponential form and power-law form) leads to quite different diffusion phenomena. The particle's intrinsic diffusion behavior also plays an important role. Our detailed theoretical analyses and simulations present a panoramic view of investigating anomalous diffusion in expanding medium under the framework of Langevin equation.

We describe in the context of the particle physics (PP) standard model (SM) `PP-SM' the understanding of the primordial properties and composition of the Universe in the temperature range 130GeV>T>20keV. The Universe evolution is described using FLRW cosmology. We present a global view on particle content across time and describe the different evolution eras using deceleration parameter q. We follow the arrow of time in the expanding and cooling Universe: After the PP-SM heavies (t, h, W, Z) diminish in abundance below Tsimeq 50GeV, the PP-SM plasma in the Universe is governed by the strongly interacting Quark-Gluon content. Once the temperature drops below Tsimeq 150MeV, quarks and gluons hadronize into strongly interacting matter particles. Rapid disappearance of baryonic antimatter completes at T_B=38.2MeV. We study the ensuing disappearance of strangeness and mesons in general. We show that the different eras defined by particle populations are barely separated from each other with abundance of muons fading out just prior to T=O(2.5)MeV, the era of emergence of the free-streaming neutrinos. We discuss the two relevant fundamental constants controlling the decoupling of neutrinos. We subsequently follow the primordial Universe as it passes through the hot dense electron-positron plasma epoch. The high density of positron antimatter disappears near T=20.3keV: Nuclear reactions occur in the presence of a highly mobile and relatively strongly interacting electron-positron plasma phase. We apply plasma theory methods to describe the strong screening effects between heavy dust particle (nucleons). We analyze the paramagnetic characteristics of the electron-positron plasma when exposed to an external primordial magnetic field.

Accurately predicting the future fluid is important to extensive areas, such as meteorology, oceanology and aerodynamics. However, since the fluid is usually observed from an Eulerian perspective, its active and intricate dynamics are seriously obscured and confounded in static grids, bringing horny challenges to the prediction. This paper introduces a new Lagrangian-guided paradigm to tackle the tanglesome fluid dynamics. Instead of solely predicting the future based on Eulerian observations, we propose the Eulerian-Lagrangian Dual Recurrent Network (EuLagNet), which captures multiscale fluid dynamics by tracking movements of adaptively sampled key particles on multiple scales and integrating dynamics information over time. Concretely, a EuLag Block is presented to communicate the learned Eulerian and Lagrangian features at each moment and scale, where the motion of tracked particles is inferred from Eulerian observations and their accumulated dynamics information is incorporated into Eulerian fields to guide future prediction. Tracking key particles not only provides a clear and interpretable clue for fluid dynamics but also makes our model free from modeling complex correlations among massive grids for better efficiency. Experimentally, EuLagNet excels in three challenging fluid prediction tasks, covering both 2D and 3D, simulated and real-world fluids.

Video generation models have achieved remarkable progress in creating high-quality, photorealistic content. However, their ability to accurately simulate physical phenomena remains a critical and unresolved challenge. This paper presents PhyWorldBench, a comprehensive benchmark designed to evaluate video generation models based on their adherence to the laws of physics. The benchmark covers multiple levels of physical phenomena, ranging from fundamental principles like object motion and energy conservation to more complex scenarios involving rigid body interactions and human or animal motion. Additionally, we introduce a novel ""Anti-Physics"" category, where prompts intentionally violate real-world physics, enabling the assessment of whether models can follow such instructions while maintaining logical consistency. Besides large-scale human evaluation, we also design a simple yet effective method that could utilize current MLLM to evaluate the physics realism in a zero-shot fashion. We evaluate 12 state-of-the-art text-to-video generation models, including five open-source and five proprietary models, with a detailed comparison and analysis. we identify pivotal challenges models face in adhering to real-world physics. Through systematic testing of their outputs across 1,050 curated prompts-spanning fundamental, composite, and anti-physics scenarios-we identify pivotal challenges these models face in adhering to real-world physics. We then rigorously examine their performance on diverse physical phenomena with varying prompt types, deriving targeted recommendations for crafting prompts that enhance fidelity to physical principles.

Systems of interacting objects often evolve under the influence of field effects that govern their dynamics, yet previous works have abstracted away from such effects, and assume that systems evolve in a vacuum. In this work, we focus on discovering these fields, and infer them from the observed dynamics alone, without directly observing them. We theorize the presence of latent force fields, and propose neural fields to learn them. Since the observed dynamics constitute the net effect of local object interactions and global field effects, recently popularized equivariant networks are inapplicable, as they fail to capture global information. To address this, we propose to disentangle local object interactions -- which are SE(n) equivariant and depend on relative states -- from external global field effects -- which depend on absolute states. We model interactions with equivariant graph networks, and combine them with neural fields in a novel graph network that integrates field forces. Our experiments show that we can accurately discover the underlying fields in charged particles settings, traffic scenes, and gravitational n-body problems, and effectively use them to learn the system and forecast future trajectories.

This paper proposes a novel data-driven approach for inertial navigation, which learns to estimate trajectories of natural human motions just from an inertial measurement unit (IMU) in every smartphone. The key observation is that human motions are repetitive and consist of a few major modes (e.g., standing, walking, or turning). Our algorithm regresses a velocity vector from the history of linear accelerations and angular velocities, then corrects low-frequency bias in the linear accelerations, which are integrated twice to estimate positions. We have acquired training data with ground-truth motions across multiple human subjects and multiple phone placements (e.g., in a bag or a hand). The qualitatively and quantitatively evaluations have demonstrated that our algorithm has surprisingly shown comparable results to full Visual Inertial navigation. To our knowledge, this paper is the first to integrate sophisticated machine learning techniques with inertial navigation, potentially opening up a new line of research in the domain of data-driven inertial navigation. We will publicly share our code and data to facilitate further research.

Generative video models achieve high visual fidelity but often violate basic physical principles, limiting reliability in real-world settings. Prior attempts to inject physics rely on conditioning: frame-level signals are domain-specific and short-horizon, while global text prompts are coarse and noisy, missing fine-grained dynamics. We present PhysVid, a physics-aware local conditioning scheme that operates over temporally contiguous chunks of frames. Each chunk is annotated with physics-grounded descriptions of states, interactions, and constraints, which are fused with the global prompt via chunk-aware cross-attention during training. At inference, we introduce negative physics prompts (descriptions of locally relevant law violations) to steer generation away from implausible trajectories. On VideoPhy, PhysVid improves physical commonsense scores by approx 33% over baseline video generators, and by up to approx 8% on VideoPhy2. These results show that local, physics-aware guidance substantially increases physical plausibility in generative video and marks a step toward physics-grounded video models.

Recent studies illustrate the correlation between the angular momenta of cosmic structures and their Lagrangian properties. However, only baryons are observable and it is unclear whether they reliably trace the cosmic angular momenta. We study the Lagrangian mass distribution, spin correlation, and predictability of dark matter, gas, and stellar components of galaxy-halo systems using IllustrisTNG, and show that the primordial segregations between components are typically small. Their protoshapes are also similar in terms of the statistics of moment of inertia tensors. Under the common gravitational potential they are expected to exert the same tidal torque and the strong spin correlations are not destroyed by the nonlinear evolution and complicated baryonic effects, as confirmed by the high-resolution hydrodynamic simulations. We further show that their late-time angular momenta traced by total gas, stars, or the central galaxies, can be reliably reconstructed by the initial perturbations. These results suggest that baryonic angular momenta can potentially be used in reconstructing the parameters and models related to the initial perturbations.

Accurate mechanical properties (or materials) Young's modulus (E), Poisson's ratio (ν) and density (ρ) are essential for reliable physics simulation of digital worlds, but most 3D assets lack this information. We propose AdaVoMP, a method for predicting accurate dense spatially-varying (E, ν, ρ) for input 3D objects across representations, improving the resolution, accuracy, and memory efficiency over the state-of-the-art. The foundation of our technique is a sparse and adaptive voxel structure SAV that efficiently represents both the input 3D shape and the material field output. We replace the fixed-voxel model of the most accurate prior method, VoMP, with a novel sparse transformer encoder-decoder model that learns to generate a unique SAV autoregressively for every input shape to represent its materials, achieving a resolution 16^3times higher than prior art. Experiments show that AdaVoMP estimates more accurate volumetric properties, even with lesser test-time compute than all prior art. This allows us to convert high-resolution complex 3D objects into simulation-ready assets, resulting in realistic deformable simulations.

An invariant extended Kalman filter (IEKF) is developed for state estimation of serial rigid manipulators with an arbitrary number of links, formulated entirely within the Lie group SE(3). The group-affine property of the kinematic equations makes the linearised error dynamics autonomous, so the Riccati equation governs the true error covariance rather than a local approximation. A physically separated noise model treats gyroscope and accelerometer channels independently: the accelerometer provides translational twist via gravity-compensated integration, yielding a measurement covariance that scales with the sample interval in exact analogy with process noise discretisation; a state-dependent Coriolis noise term captures gyroscope noise propagating through the nonlinear dynamics, vanishing at rest and growing with twist magnitude. The filter is structured as a modular chain of per-link IEKFs in which the predicted covariance of each link depends on its predecessor only through the Adjoint-transformed posterior, giving linear computational cost in link count. Exponential ultimate boundedness in mean square is established via a Lie algebra Lyapunov function, with per-link bounds chained through the Adjoint operator norm to yield a stability certificate that is modular and scalable to arbitrary chain length. Numerical results validate the design.

JEPA-family world models use a static predictor whose weights do not adapt when test-time dynamics diverge from training. We compare two mechanisms for incorporating accumulated experience into a JEPA predictor under distribution shift: operand-side injection, where a compressed experience representation is added as a residual to the predictor's hidden state (EI-JEPA), and operator-side modulation, where the same representation generates low-rank weight deltas via LoRA applied to the predictor's weights (EPM-JEPA). On a pre-registered comparison (Moving MNIST, gravity shift), EPM-JEPA (D_shift^{n=50} = 0.7848 +/- 0.0078, three seeds) differs from EI-JEPA (0.8238) by delta = 4.74% - Outcome C: a null result - by our stated criterion, a valid outcome. As a secondary, non-pre-registered observation, EPM-JEPA improves 1.90% over a no-memory baseline (0.8000), consistently across seeds, while EI-JEPA underperforms the baseline, indicating the benefit is specific to weight-level modulation. Our primary contribution is a mechanism analysis: the D_shift^{n=50} trajectory reflects three independent dynamical processes - buffer cycling, EMA target drift, and an intrinsic LoRA settling transient of +0.021 - rather than convergence to equilibrium. These findings motivate PEM-JEPA, a physics-grounded successor addressing this dynamical-peak limitation.

Context. Understanding how the shape of cloud particle size distributions affects the atmospheric properties of sub-stellar atmospheres is a key area to explore, particularly in the JWST era of broad wavelength coverage, where observations are sensitive to particle size distributions. It is therefore important to elucidate how underlying cloud microphysical processes influence the size distribution, in order to better understand how clouds affect observed atmospheric properties. Aims. In this follow-up paper, we aim to extend our sub-stellar atmosphere microphysical cloud formation framework from Paper I to include effects of assuming a polydisperse gamma particle size distribution, requiring a three-moment solution set of equations. Methods. We develop a three-moment framework for sub-stellar mineral cloud particle microphysical nucleation, condensation, evaporation and collisional growth assuming a gamma distribution. As in the previous paper, we demonstrate the effects of polydispersity using a simple one-dimensional Y-dwarf KCl cloud formation scenario, and compare the results with the monodisperse case. Results. Our three-moment scheme provides a generalised framework applicable to any size distribution with a defined moment generation expression. In our test case, we show that the gamma distribution evolves with altitude, initially broad at the cloud base and narrowing at lower pressures. We find that differences between the gamma and monodisperse cloud structures can be significant, depending on the surface gravity of the atmosphere. Conclusions. We present a self-consistent framework for including the effects of polydispersity for sub-stellar microphysical cloud studies using the moment method.

In physics, Lagrangians provide a systematic way to describe laws governing physical systems. In the context of particle physics, they encode the interactions and behavior of the fundamental building blocks of our universe. By treating Lagrangians as complex, rule-based constructs similar to linguistic expressions, we trained a transformer model -- proven to be effective in natural language tasks -- to predict the Lagrangian corresponding to a given list of particles. We report on the transformer's performance in constructing Lagrangians respecting the Standard Model SU(3)times SU(2)times U(1) gauge symmetries. The resulting model is shown to achieve high accuracies (over 90\%) with Lagrangians up to six matter fields, with the capacity to generalize beyond the training distribution, albeit within architectural constraints. We show through an analysis of input embeddings that the model has internalized concepts such as group representations and conjugation operations as it learned to generate Lagrangians. We make the model and training datasets available to the community. An interactive demonstration can be found at: https://huggingface.co/spaces/JoseEliel/generate-lagrangians.

High-throughput scientific facilities such as the Large Hadron Collider depend on real-time event filtering (triggering) under tight constraints on bandwidth, latency, and storage. In practice, trigger menus are largely static and hand-tuned and can become suboptimal as detector conditions, pileup, and background composition drift over time. We cast online threshold tuning as a sequential decision-making problem: a reinforcement learning agent ingests streaming summaries of recent rates and signal-sensitive features and updates trigger thresholds to maximize signal efficiency while tracking a target background rate within a tolerance band. We adapt Group-Filtered Policy Optimization (GFPO) to streaming control and introduce two variants (GFPO-F, GFPO-FR) that enforce background rate feasibility during training. On a benchmark that emulates realistic collider operation, we study two representative triggers: a total transverse energy (H_{T}) trigger sensitive to pileup variation, and an anomaly-detection (AD) trigger based on reconstruction loss for rare or non-standard signatures. On Monte Carlo streams, our agent increases the fraction of in-tolerance time intervals by 48\% (H_T) and 28\% (AD), with a cumulative gain of up to 2\% in signal efficiency on those in-tolerance intervals. Transferring from simulation to real collision data (CMS Run 283408), the same agent, without fine-tuning, achieves a 56\% (H_T) and 28\% (AD) in-tolerance improvement over baselines, with further signal-efficiency gain on both triggers. To our knowledge, this is the first demonstration of RL-based trigger control on real Large Hadron Collider collision data. Code is available at https://github.com/Zixind/GFPO_LHC (see repo for details).

Accurate aerodynamic modeling of satellites in very low Earth orbit (VLEO) requires gas-surface interaction (GSI) models that capture the full velocity spectrum from thermal to orbital speeds. Atmospheric particles initially strike spacecraft surfaces at hypersonic velocities of 6 000 - 10 000 m/s. Due to surface roughness and complex geometries, especially within air-breathing electric propulsion (ABEP) intake systems, multiple collisions occur, progressively reducing the particle velocities. A recent machine learning framework for deriving scattering kernels from molecular dynamics (MD) simulations has shown promise, but remains limited to high-velocity single impacts and possibly violates fundamental equilibrium principles such as detailed balance. This work extends this machine learning based scattering kernel to cover the complete velocity range using conditional normalizing flows trained with physics-informed constraints, enabling accurate modeling of multi-bounce scenarios in realistic VLEO applications. We train a conditional Real-valued Non-Volume Preserving (cRealNVP) model on expanded molecular dynamics simulations covering velocities from thermal to hypersonic speeds, incorporating a detailed balance loss term. The resulting model demonstrates improved accuracy compared to previous approaches even in the original high-velocity regime, while successfully capturing thermal-velocity scattering. Quantitative assessment shows that thermalization is approximated within acceptable tolerances. This framework provides essential capabilities for accurate ABEP intake optimization and VLEO mission planning while offering a general methodology applicable to broader rarefied gas dynamics problems requiring thermodynamic consistency.

Generative world models are increasingly used for video generation, where learned simulators are expected to capture the physical rules that govern real-world dynamics. However, evaluating whether generated videos actually follow these rules remains challenging. Existing physics-focused video benchmarks have made important progress, but they still face three key challenges, including the coarse evaluation frameworks that hide law-specific failures, response biases and fatigue that undermine the validity of annotation judgments, and automated evaluators that are insufficiently physics-aware or difficult to audit. To address those challenges, we introduce PhyGround, a criteria-grounded benchmark for evaluating physical reasoning in video generation. The benchmark contains 250 curated prompts, each augmented with an expected physical outcome, and a taxonomy of 13 physical laws across solid-body mechanics, fluid dynamics, and optics. Each law is operationalized through observable sub-questions to enable per-law diagnostics. We evaluate eight modern video generation models through a large-scale, quality-controlled human study, grounded on social science lab experiment design. A total of 459 annotators provided 5,796 complete annotations and over 37.4K fine-grained labels; after quality control, the retained annotations exhibited high split-half model-ranking correlations (Spearman's rho > 0.90). To support reproducible automated evaluation, we release PhyJudge-9B, an open physics-specialized VLM judge. PhyJudge-9B achieves substantially lower aggregate relative bias than Gemini-3.1-Pro (3.3% vs. 16.6%). We release prompts, human annotations, model checkpoints, and evaluation code on the project page https://phyground.github.io/.

Modern artificial intelligence excels at statistical interpolation within seen manifolds but fundamentally fails at the exact reasoning required for theoretical physics and mathematics. We identify the "Float Wall" -- a catastrophic collapse of neural extrapolation at scales beyond 10^{16} -- caused by standard floating-point representation and linguistic tokenization (BPE). To resolve this, we introduce the Active Discoverer Framework, a digit-native neuro-symbolic architecture designed for invariant discovery. At its core is NumberNet, a Siamese Arithmetic Transformer that utilizes least-significant-bit (LSB) sequence encoding to achieve 0% precision loss and cosmic-scale extrapolation up to 10^{50}. To enforce physical grounding, we implement a Hamiltonian-based energy descent and Symmetry Grouping layer, ensuring the model respects Noether's theorem natively. The primary innovation is the Symbolic LaTeX Bottleneck: an active discovery loop where the model is forced to hypothesize unknown physical variables through an autoregressive LaTeX decoder. By reconciling numeric "hallucinations" with structurally valid mathematical expressions, the framework ensures that any discovered physics is parsimonious and human-interpretable. We evaluate this system against a 30-billion scale benchmark and the Universal Physics Pantheon, featuring 50 "Chaos Mode" systemic perturbations. Our results demonstrate that while traditional GBDT and LLM-based architectures collapse at cosmic scales, the Active Discoverer autonomously deduces universal constants such as the Gravitational Constant (G) with high fidelity. This framework establishes a path toward zero-hallucination artificial intelligence and truly autonomous scientific research agents.

It is well-known that inverse dynamics models can improve tracking performance in robot control. These models need to precisely capture the robot dynamics, which consist of well-understood components, e.g., rigid body dynamics, and effects that remain challenging to capture, e.g., stick-slip friction and mechanical flexibilities. Such effects exhibit hysteresis and partial observability, rendering them, particularly challenging to model. Hence, hybrid models, which combine a physical prior with data-driven approaches are especially well-suited in this setting. We present a novel hybrid model formulation that enables us to identify fully physically consistent inertial parameters of a rigid body dynamics model which is paired with a recurrent neural network architecture, allowing us to capture unmodeled partially observable effects using the network memory. We compare our approach against state-of-the-art inverse dynamics models on a 7 degree of freedom manipulator. Using data sets obtained through an optimal experiment design approach, we study the accuracy of offline torque prediction and generalization capabilities of joint learning methods. In control experiments on the real system, we evaluate the model as a feed-forward term for impedance control and show the feedback gains can be drastically reduced to achieve a given tracking accuracy.

We build slowly rotating anisotropic neutron stars using the Hartle-Thorne formalism, employing three distinct anisotropy models--Horvat, Bowers-Liang, and a covariant model--to characterize the relationship between radial and tangential pressure. We analyze how anisotropy influences stellar properties such as the mass-radius relation, angular momentum, moment of inertia, and binding energy. Our findings reveal that the maximum stable mass of non-rotating stars depends strongly on the anisotropy model, with some configurations supporting up to 60% more mass than their isotropic counterparts with the same central density. This mass increase is most pronounced in the models where the anisotropy grows toward the star's surface, as seen in the covariant model. Furthermore, slowly rotating anisotropic stars adhere to universal relations for the moment of inertia and binding energy, regardless of the chosen anisotropy model or equation of state.

At high-energy collider experiments, generative models can be used for a wide range of tasks, including fast detector simulations, unfolding, searches of physics beyond the Standard Model, and inference tasks. In particular, it has been demonstrated that score-based diffusion models can generate high-fidelity and accurate samples of jets or collider events. This work expands on previous generative models in three distinct ways. First, our model is trained to generate entire collider events, including all particle species with complete kinematic information. We quantify how well the model learns event-wide constraints such as the conservation of momentum and discrete quantum numbers. We focus on the events at the future Electron-Ion Collider, but we expect that our results can be extended to proton-proton and heavy-ion collisions. Second, previous generative models often relied on image-based techniques. The sparsity of the data can negatively affect the fidelity and sampling time of the model. We address these issues using point clouds and a novel architecture combining edge creation with transformer modules called Point Edge Transformers. Third, we adapt the foundation model OmniLearn, to generate full collider events. This approach may indicate a transition toward adapting and fine-tuning foundation models for downstream tasks instead of training new models from scratch.

Many problems in astrophysics cover multiple orders of magnitude in spatial and temporal scales. While simulating systems that experience rapid changes in these conditions, it is essential to adapt the (time-) step size to capture the behavior of the system during those rapid changes and use a less accurate time step at other, less demanding, moments. We encounter three problems with traditional methods. Firstly, making such changes requires expert knowledge of the astrophysics as well as of the details of the numerical implementation. Secondly, some parameters that determine the time-step size are fixed throughout the simulation, which means that they do not adapt to the rapidly changing conditions of the problem. Lastly, we would like the choice of time-step size to balance accuracy and computation effort. We address these challenges with Reinforcement Learning by training it to select the time-step size dynamically. We use the integration of a system of three equal-mass bodies that move due to their mutual gravity as an example of its application. With our method, the selected integration parameter adapts to the specific requirements of the problem, both in terms of computation time and accuracy while eliminating the expert knowledge needed to set up these simulations. Our method produces results competitive to existing methods and improve the results found with the most commonly-used values of time-step parameter. This method can be applied to other integrators without further retraining. We show that this extrapolation works for variable time-step integrators but does not perform to the desired accuracy for fixed time-step integrators.

Accurate prediction of Lagrangian trajectories in turbulent flow remains challenging due to limited temporal information in transport functions. This paper shows that surrounding coherent motions sharing the same dynamics carry enough information to provide highly probable trajectories even from sparse temporal observations. The proposed coherent predictor builds on Lagrangian coherent structures (LCSs), the advective transport barriers that govern the cohesive motion of neighbouring particles. Coherent trajectories are quantified using a local segmentation with the finite-time Lyapunov exponents (FTLE). The coherent predictor incorporates information from the particle's position history and neighbouring coherent velocity and acceleration into a novel cost function to predict its trajectory. The proposed cost function follows a physics-informed approach where the position history acts as a data fidelity term and the coherent velocity and acceleration act as physics-based regularisation constraints. We assess our proposed approach using both three-dimensional (3D) synthetic and experimental data of the wake behind a smooth cylinder and two-dimensional (2D) homogeneous isotropic turbulent (HIT) flow. The coherent predictor is deemed generic due to its consistent behaviour regardless of flow dimensions, Reynolds number, and flow topology. Our results show that the optimal cost function parameters can be modelled from the measurement uncertainties, giving lower prediction error and uncertainty than current methods. We see direct signatures of flow topology on the prediction error map, including the cylinder leading edge boundary layer, the sideward shear layers, and the vortex formation structures. These topologies are marked by high Lagrangian gradients and 3D directional motions.

Observed dwarf galaxies tend to have linearly rising rotation curves, which indicate flat density cores in their centers. Furthermore, disk galaxies show a wide range of rotation curves shapes. High resolution simulations of cold collisionless dark matter do not reproduce flat central profiles, or the observed diversity of rotation curve shapes; even hydrodynamic simulations incorporating baryonic feedback cannot do that robustly. However, numerical simulations are not the only way to make predictions about density profiles of equilibrium dark matter halos. A theoretical model based on statistical mechanics shows that maximum entropy solutions for cold collisionless self-gravitating dark matter halos can have a range of inner density profiles, including flat density cores. These theoretical profiles, called DARKexp, have only one shape parameter, and are able to fit the observed rotation curves of galaxies with last measured velocities in the range ~20-200 km/s. Here we present fits to 96 SPARC catalog galaxies, and the Milky Way. DARKexp also provides good fits to the projected stellar density distributions of ultrafaint dwarfs that show cores, suggesting that the dark matter halo hosts could have flat density cores. Thus, DARKexp appears to be able to address the core-cusp problem and the diversity of rotation curves with cold collisionless dark matter alone, without baryonic feedback.

Flow matching generates data by integrating a learned velocity field, where the number of integration steps (NFE) directly determines inference cost. We analyze which properties of the velocity field govern integration error by decomposing the velocity Jacobian into its symmetric part S (strain rate) and antisymmetric part Omega (vorticity). We prove that strain and vorticity play different roles: strain controls exponential error amplification through the logarithmic norm, while vorticity contributes only linearly to the local truncation error. We further show that the optimal transport velocity field is irrotational and has zero material derivative, implying second-order Euler accuracy; for exact displacement interpolation, the associated Lagrangian particle dynamics are integrated exactly by Euler. Motivated by this analysis, we study weighted Jacobian regularization with strain weight alpha and vorticity weight beta. Experiments on 2D synthetic data confirm the main theoretical predictions, showing up to 2.7x lower integration error at NFE=5. Preliminary CIFAR-10 experiments show consistent trends, with a lightweight fine-tuning procedure improving FID by 14 percent at NFE=10 while preserving high-NFE quality.

WIMP-type dark matter may have additional interactions that break baryon number, leading to induced nucleon decays which are subject to direct experimental constraints from proton decay experiments. In this work, we analyze the possibility of continuous baryon destruction, deriving strong limits from the dark matter accumulating inside old neutron stars, as such a process leads to excess heat generation. We construct the simplest particle dark matter model that breaks baryon and lepton numbers separately but conserves B-L. Virtual exchange by DM particles in this model results in di-nucleon decay via nnto nbarnu and npto ne^+ processes.

Current adversarial attacks on motion estimation, or optical flow, optimize small per-pixel perturbations, which are unlikely to appear in the real world. In contrast, adverse weather conditions constitute a much more realistic threat scenario. Hence, in this work, we present a novel attack on motion estimation that exploits adversarially optimized particles to mimic weather effects like snowflakes, rain streaks or fog clouds. At the core of our attack framework is a differentiable particle rendering system that integrates particles (i) consistently over multiple time steps (ii) into the 3D space (iii) with a photo-realistic appearance. Through optimization, we obtain adversarial weather that significantly impacts the motion estimation. Surprisingly, methods that previously showed good robustness towards small per-pixel perturbations are particularly vulnerable to adversarial weather. At the same time, augmenting the training with non-optimized weather increases a method's robustness towards weather effects and improves generalizability at almost no additional cost. Our code will be available at https://github.com/cv-stuttgart/DistractingDownpour.

Inertial Navigation Systems (INS) are algorithms that fuse inertial measurements of angular velocity and specific acceleration with supplementary sensors including GNSS and magnetometers to estimate the position, velocity and attitude, or extended pose, of a vehicle. The industry-standard extended Kalman filter (EKF) does not come with strong stability or robustness guarantees and can be subject to catastrophic failure. This paper exploits a Lie group symmetry of the INS dynamics to propose the first nonlinear observer for INS with error dynamics that are almost-globally asymptotically and locally exponentially stable, independently of the chosen gains. The observer is aided only by a GNSS measurement of position. As expected, the convergence guarantee depends on persistence of excitation of the vehicle's specific acceleration in the inertial frame. Simulation results demonstrate the observer's performance and its ability to converge from extreme errors in the initial state estimates.

Air quality prediction and modelling plays a pivotal role in public health and environment management, for individuals and authorities to make informed decisions. Although traditional data-driven models have shown promise in this domain, their long-term prediction accuracy can be limited, especially in scenarios with sparse or incomplete data and they often rely on black-box deep learning structures that lack solid physical foundation leading to reduced transparency and interpretability in predictions. To address these limitations, this paper presents a novel approach named Physics guided Neural Network for Air Quality Prediction (AirPhyNet). Specifically, we leverage two well-established physics principles of air particle movement (diffusion and advection) by representing them as differential equation networks. Then, we utilize a graph structure to integrate physics knowledge into a neural network architecture and exploit latent representations to capture spatio-temporal relationships within the air quality data. Experiments on two real-world benchmark datasets demonstrate that AirPhyNet outperforms state-of-the-art models for different testing scenarios including different lead time (24h, 48h, 72h), sparse data and sudden change prediction, achieving reduction in prediction errors up to 10%. Moreover, a case study further validates that our model captures underlying physical processes of particle movement and generates accurate predictions with real physical meaning.

Soot is a component of atmospheric aerosols that affects climate by scattering and absorbing the sunlight. Soot particles are fractal aggregates composed of elemental carbon. In the atmosphere, the aggregates acquire coatings by condensation and coagulation, resulting in significant compaction of the aggregates that changes the direct climate forcing of soot. Currently, no models exist to rigorously describe the process of soot restructuring, reducing prediction accuracy of atmospheric aerosol models. We develop a discrete element method contact model to simulate restructuring of fractal soot aggregates, represented as assemblies of spheres joined by cohesion and by sintered necks. The model is parametrized based on atomic force spectroscopy data and is used to simulate soot restructuring, showing that the fraction of necks in aggregates determines the restructuring pathway. Aggregates with fewer necks undergo local compaction, while aggregates with nearly-full necking prefer global compaction. Additionally, full compaction occurs within tens of nanoseconds, orders of magnitude faster than the time scale of soot aging through condensation. An important implication is that in atmospheric soot aggregates, the rate of condensation determines how many necks are fractured simultaneously, affecting the restructuring pathway, e.g., producing highly compact, thinly-coated soot as observed in recent studies.

Foundation models have transformed machine learning for language and vision, but achieving comparable impact in physical simulation remains a challenge. Data heterogeneity and unstable long-term dynamics inhibit learning from sufficiently diverse dynamics, while varying resolutions and dimensionalities challenge efficient training on modern hardware. Through empirical and theoretical analysis, we incorporate new approaches to mitigate these obstacles, including a harmonic-analysis-based stabilization method, load-balanced distributed 2D and 3D training strategies, and compute-adaptive tokenization. Using these tools, we develop Walrus, a transformer-based foundation model developed primarily for fluid-like continuum dynamics. Walrus is pretrained on nineteen diverse scenarios spanning astrophysics, geoscience, rheology, plasma physics, acoustics, and classical fluids. Experiments show that Walrus outperforms prior foundation models on both short and long term prediction horizons on downstream tasks and across the breadth of pretraining data, while ablation studies confirm the value of our contributions to forecast stability, training throughput, and transfer performance over conventional approaches. Code and weights are released for community use.

This paper presents a novel guidance law for target tracking applications where the target motion model is unknown and sensor measurements are intermittent due to unknown environmental conditions and low measurement update rate. In this work, the target motion model is represented by a transformer neural network and trained by previous target position measurements. This transformer motion model serves as the prediction step in a particle filter for target state estimation and uncertainty quantification. The particle filter estimation uncertainty is utilized in the information-driven guidance law to compute a path for the mobile agent to travel to a position with maximum expected entropy reduction (EER). The computation of EER is performed in real-time by approximating the information gain from the predicted particle distributions relative to the current distribution. Simulation and hardware experiments are performed with a quadcopter agent and TurtleBot target to demonstrate that the presented guidance law outperforms two other baseline guidance methods.

The Muon optimizer has rapidly emerged as a powerful, geometry-aware alternative to AdamW, demonstrating strong performance in large-scale training of neural networks. However, a critical theory-practice disconnect exists: Muon's efficiency relies on fast, approximate orthogonalization, yet all prior theoretical work analyzes an idealized, computationally intractable version assuming exact SVD-based updates. This work moves beyond the ideal by providing the first analysis of the inexact orthogonalized update at Muon's core. We develop our analysis within the general framework of Linear Minimization Oracle (LMO)-based optimization, introducing a realistic additive error model to capture the inexactness of practical approximation schemes. Our analysis yields explicit bounds that quantify performance degradation as a function of the LMO inexactness/error. We reveal a fundamental coupling between this inexactness and the optimal step size and momentum: lower oracle precision requires a smaller step size but larger momentum parameter. These findings elevate the approximation procedure (e.g., the number of Newton-Schulz steps) from an implementation detail to a critical parameter that must be co-tuned with the learning schedule. NanoGPT experiments directly confirm the predicted coupling, with optimal learning rates clearly shifting as approximation precision changes.

Plasma modeling is central to the design of nuclear fusion reactors, yet simulating collisional plasma kinetics from first principles remains a formidable computational challenge: the Vlasov-Maxwell-Landau (VML) system describes six-dimensional phase-space transport under self-consistent electromagnetic fields together with the nonlinear, nonlocal Landau collision operator. A recent deterministic particle method for the full VML system estimates the velocity score function via the blob method, a kernel-based approximation with O(n^2) cost. In this work, we replace the blob score estimator with score-based transport modeling (SBTM), in which a neural network is trained on-the-fly via implicit score matching at O(n) cost. We prove that the approximated collision operator preserves momentum and kinetic energy, and dissipates an estimated entropy. We also characterize the unique global steady state of the VML system and its electrostatic reduction, providing the ground truth for numerical validation. On three canonical benchmarks -- Landau damping, two-stream instability, and Weibel instability -- SBTM is more accurate than the blob method, achieves correct long-time relaxation to Maxwellian equilibrium where the blob method fails, and delivers 50% faster runtime with 4times lower peak memory.

In recent years, there has been rapid development in 3D generation models, opening up new possibilities for applications such as simulating the dynamic movements of 3D objects and customizing their behaviors. However, current 3D generative models tend to focus only on surface features such as color and shape, neglecting the inherent physical properties that govern the behavior of objects in the real world. To accurately simulate physics-aligned dynamics, it is essential to predict the physical properties of materials and incorporate them into the behavior prediction process. Nonetheless, predicting the diverse materials of real-world objects is still challenging due to the complex nature of their physical attributes. In this paper, we propose Physics3D, a novel method for learning various physical properties of 3D objects through a video diffusion model. Our approach involves designing a highly generalizable physical simulation system based on a viscoelastic material model, which enables us to simulate a wide range of materials with high-fidelity capabilities. Moreover, we distill the physical priors from a video diffusion model that contains more understanding of realistic object materials. Extensive experiments demonstrate the effectiveness of our method with both elastic and plastic materials. Physics3D shows great potential for bridging the gap between the physical world and virtual neural space, providing a better integration and application of realistic physical principles in virtual environments. Project page: https://liuff19.github.io/Physics3D.

We tackle the problem of estimating a Manhattan frame, i.e. three orthogonal vanishing points, and the unknown focal length of the camera, leveraging a prior vertical direction. The direction can come from an Inertial Measurement Unit that is a standard component of recent consumer devices, e.g., smartphones. We provide an exhaustive analysis of minimal line configurations and derive two new 2-line solvers, one of which does not suffer from singularities affecting existing solvers. Additionally, we design a new non-minimal method, running on an arbitrary number of lines, to boost the performance in local optimization. Combining all solvers in a hybrid robust estimator, our method achieves increased accuracy even with a rough prior. Experiments on synthetic and real-world datasets demonstrate the superior accuracy of our method compared to the state of the art, while having comparable runtimes. We further demonstrate the applicability of our solvers for relative rotation estimation. The code is available at https://github.com/cvg/VP-Estimation-with-Prior-Gravity.

While recent generative video models have achieved remarkable visual realism and are being explored as world models, true physical simulation requires mastering both space and time. Current models can produce visually smooth kinematics, yet they lack a reliable internal motion pulse to ground these motions in a consistent, real-world time scale. This temporal ambiguity stems from the common practice of indiscriminately training on videos with vastly different real-world speeds, forcing them into standardized frame rates. This leads to what we term chronometric hallucination: generated sequences exhibit ambiguous, unstable, and uncontrollable physical motion speeds. To address this, we propose Visual Chronometer, a predictor that recovers the Physical Frames Per Second (PhyFPS) directly from the visual dynamics of an input video. Trained via controlled temporal resampling, our method estimates the true temporal scale implied by the motion itself, bypassing unreliable metadata. To systematically quantify this issue, we establish two benchmarks, PhyFPS-Bench-Real and PhyFPS-Bench-Gen. Our evaluations reveal a harsh reality: state-of-the-art video generators suffer from severe PhyFPS misalignment and temporal instability. Finally, we demonstrate that applying PhyFPS corrections significantly improves the human-perceived naturalness of AI-generated videos. Our project page is https://xiangbogaobarry.github.io/Visual_Chronometer/.

The Mechanistic Interpretability (MI) program has mapped the Transformer as a precise computational graph. We extend this graph with a conservation law and time-varying AC dynamics, viewing it as a physical circuit. We introduce Momentum Attention, a symplectic augmentation embedding physical priors via the kinematic difference operator p_t = q_t - q_{t-1}, implementing the symplectic shear q_t = q_t + γp_t on queries and keys. We identify a fundamental Symplectic-Filter Duality: the physical shear is mathematically equivalent to a High-Pass Filter. This duality is our cornerstone contribution -- by injecting kinematic momentum, we sidestep the topological depth constraint (L geq 2) for induction head formation. While standard architectures require two layers for induction from static positions, our extension grants direct access to velocity, enabling Single-Layer Induction and Spectral Forensics via Bode Plots. We formalize an Orthogonality Theorem proving that DC (semantic) and AC (mechanistic) signals segregate into orthogonal frequency bands when Low-Pass RoPE interacts with High-Pass Momentum. Validated through 5,100+ controlled experiments (documented in Supplementary Appendices A--R and 27 Jupyter notebooks), our 125M Momentum model exceeds expectations on induction-heavy tasks while tracking a 350M baseline within sim2.9% validation loss. Dedicated associative recall experiments reveal a scaling law γ^* = 4.17 times N^{-0.74} establishing momentum-depth fungibility. We offer this framework as a complementary analytical toolkit connecting Generative AI, Hamiltonian Physics, and Signal Processing.

We study inference-time scaling for diffusion models, where the goal is to adapt a pre-trained model to new target distributions without retraining. Existing guidance-based methods are simple but introduce bias, while particle-based corrections suffer from weight degeneracy and high computational cost. We introduce DriftLite, a lightweight, training-free particle-based approach that steers the inference dynamics on the fly with provably optimal stability control. DriftLite exploits a previously unexplored degree of freedom in the Fokker-Planck equation between the drift and particle potential, and yields two practical instantiations: Variance- and Energy-Controlling Guidance (VCG/ECG) for approximating the optimal drift with minimal overhead. Across Gaussian mixture models, particle systems, and large-scale protein-ligand co-folding problems, DriftLite consistently reduces variance and improves sample quality over pure guidance and sequential Monte Carlo baselines. These results highlight a principled, efficient route toward scalable inference-time adaptation of diffusion models.